Production of wheat gluten hydrolysates with improved functional properties: Optimization of operating parameters by statistical design
Samo za registrovane korisnike
2018
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Native wheat gluten is a deluxe bread improver and may be utilized as a functional protein additive in multifarious non-bakery foodstuffs due to its desirable structure-enhancing properties. Also its utilization would be economically interesting, but lack of some desirable functional properties limited their expanding utilization in foodstuff formulations. This study was designed to examine the relationship between process parameters and functional properties of the obtained hydrolysates using Box-Benken experimental design and response surface methodology (RSM). The hydro-lysate showing the highest improvement of solubility and foaming ability was further separated by sequential ultrafiltration to obtain molecular weight distribution profile. The progress of wheat gluten hydrolysis was followed by monitoring the degree of hydrolysis (DH) using the pH-stat method and functional properties were measured by our methods already adopted. The effects of process parameters (pH, T, [S], [E]/[...S] ration) and their interactions were investigated by the means of the four-factor Box-Behnken experimental design with 29 experimental points (5 central points). Experiments were carried out in triplicates and expressed as means with SD. The effects of different parameters under the significance level of p < 0.05 were examined using one-way analysis of variance (ANOVA) and Student t-test. The coefficients of the response function and their statistical significance were evaluated by the response surface regression analysis, using the Design software. Non-significant terms (p ≥ 0.05) were deleted from the second order polynomial and a new polynomial has been recalculated. The Fisher test (F-value) was used to determine whether the second-order model was adequate to describe the obtained data while the goodness of fit of the model was evaluated by the determination coefficient (R2). The obtained results showed that the second-order models developed for DH, solubility and foaming properties of gluten hydrolysates were significant (p < 0.05) with a high value of coefficients of determination (0.944-0.981). The statistical analysis showed that each variable had a significant effect on degree of hydrolysis and the functional properties of tested system. Almost the linear increase in DH was observed with the rise in temperature at the highest substrate concentration, while on the other hand increasing the concentration of the substrate leads to a decrease in DH. In terms of foaming properties results showed that foam capacity range are in the range of 24.2-80.3%, depending on the independent variables that were tested. Results are relevant to the protein ingredient industry because of the economic importance of novel glu-ten-based functional products and can provide useful information for the design an efficient enzymatic process for their production in high yield and with improved functionality.
Ključne reči:
Box-benken experimental design / Enzymatic hydrolysis / Foaming properties / Solubility / Wheat gluten proteinIzvor:
Journal of Hygienic Engineering and Design, 2018, 24, 90-100Finansiranje / projekti:
- Ministry of Education, Science and Technological Development of the Republic of Serbia for its financial support within the EUREKA Project E!9936 and Innovation Project “LAVGLU-Innovative processes of production cereals-based functional products enriched with non-allergenic proteins and bioactive peptides”.
Kolekcije
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Jovanović, Jelena AU - Stefanović, Andrea AU - Šekuljica, Nataša AU - Knežević-Jugović, Zorica PY - 2018 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3774 AB - Native wheat gluten is a deluxe bread improver and may be utilized as a functional protein additive in multifarious non-bakery foodstuffs due to its desirable structure-enhancing properties. Also its utilization would be economically interesting, but lack of some desirable functional properties limited their expanding utilization in foodstuff formulations. This study was designed to examine the relationship between process parameters and functional properties of the obtained hydrolysates using Box-Benken experimental design and response surface methodology (RSM). The hydro-lysate showing the highest improvement of solubility and foaming ability was further separated by sequential ultrafiltration to obtain molecular weight distribution profile. The progress of wheat gluten hydrolysis was followed by monitoring the degree of hydrolysis (DH) using the pH-stat method and functional properties were measured by our methods already adopted. The effects of process parameters (pH, T, [S], [E]/[S] ration) and their interactions were investigated by the means of the four-factor Box-Behnken experimental design with 29 experimental points (5 central points). Experiments were carried out in triplicates and expressed as means with SD. The effects of different parameters under the significance level of p < 0.05 were examined using one-way analysis of variance (ANOVA) and Student t-test. The coefficients of the response function and their statistical significance were evaluated by the response surface regression analysis, using the Design software. Non-significant terms (p ≥ 0.05) were deleted from the second order polynomial and a new polynomial has been recalculated. The Fisher test (F-value) was used to determine whether the second-order model was adequate to describe the obtained data while the goodness of fit of the model was evaluated by the determination coefficient (R2). The obtained results showed that the second-order models developed for DH, solubility and foaming properties of gluten hydrolysates were significant (p < 0.05) with a high value of coefficients of determination (0.944-0.981). The statistical analysis showed that each variable had a significant effect on degree of hydrolysis and the functional properties of tested system. Almost the linear increase in DH was observed with the rise in temperature at the highest substrate concentration, while on the other hand increasing the concentration of the substrate leads to a decrease in DH. In terms of foaming properties results showed that foam capacity range are in the range of 24.2-80.3%, depending on the independent variables that were tested. Results are relevant to the protein ingredient industry because of the economic importance of novel glu-ten-based functional products and can provide useful information for the design an efficient enzymatic process for their production in high yield and with improved functionality. T2 - Journal of Hygienic Engineering and Design T1 - Production of wheat gluten hydrolysates with improved functional properties: Optimization of operating parameters by statistical design EP - 100 SP - 90 VL - 24 UR - https://hdl.handle.net/21.15107/rcub_technorep_3774 ER -
@article{ author = "Jovanović, Jelena and Stefanović, Andrea and Šekuljica, Nataša and Knežević-Jugović, Zorica", year = "2018", abstract = "Native wheat gluten is a deluxe bread improver and may be utilized as a functional protein additive in multifarious non-bakery foodstuffs due to its desirable structure-enhancing properties. Also its utilization would be economically interesting, but lack of some desirable functional properties limited their expanding utilization in foodstuff formulations. This study was designed to examine the relationship between process parameters and functional properties of the obtained hydrolysates using Box-Benken experimental design and response surface methodology (RSM). The hydro-lysate showing the highest improvement of solubility and foaming ability was further separated by sequential ultrafiltration to obtain molecular weight distribution profile. The progress of wheat gluten hydrolysis was followed by monitoring the degree of hydrolysis (DH) using the pH-stat method and functional properties were measured by our methods already adopted. The effects of process parameters (pH, T, [S], [E]/[S] ration) and their interactions were investigated by the means of the four-factor Box-Behnken experimental design with 29 experimental points (5 central points). Experiments were carried out in triplicates and expressed as means with SD. The effects of different parameters under the significance level of p < 0.05 were examined using one-way analysis of variance (ANOVA) and Student t-test. The coefficients of the response function and their statistical significance were evaluated by the response surface regression analysis, using the Design software. Non-significant terms (p ≥ 0.05) were deleted from the second order polynomial and a new polynomial has been recalculated. The Fisher test (F-value) was used to determine whether the second-order model was adequate to describe the obtained data while the goodness of fit of the model was evaluated by the determination coefficient (R2). The obtained results showed that the second-order models developed for DH, solubility and foaming properties of gluten hydrolysates were significant (p < 0.05) with a high value of coefficients of determination (0.944-0.981). The statistical analysis showed that each variable had a significant effect on degree of hydrolysis and the functional properties of tested system. Almost the linear increase in DH was observed with the rise in temperature at the highest substrate concentration, while on the other hand increasing the concentration of the substrate leads to a decrease in DH. In terms of foaming properties results showed that foam capacity range are in the range of 24.2-80.3%, depending on the independent variables that were tested. Results are relevant to the protein ingredient industry because of the economic importance of novel glu-ten-based functional products and can provide useful information for the design an efficient enzymatic process for their production in high yield and with improved functionality.", journal = "Journal of Hygienic Engineering and Design", title = "Production of wheat gluten hydrolysates with improved functional properties: Optimization of operating parameters by statistical design", pages = "100-90", volume = "24", url = "https://hdl.handle.net/21.15107/rcub_technorep_3774" }
Jovanović, J., Stefanović, A., Šekuljica, N.,& Knežević-Jugović, Z.. (2018). Production of wheat gluten hydrolysates with improved functional properties: Optimization of operating parameters by statistical design. in Journal of Hygienic Engineering and Design, 24, 90-100. https://hdl.handle.net/21.15107/rcub_technorep_3774
Jovanović J, Stefanović A, Šekuljica N, Knežević-Jugović Z. Production of wheat gluten hydrolysates with improved functional properties: Optimization of operating parameters by statistical design. in Journal of Hygienic Engineering and Design. 2018;24:90-100. https://hdl.handle.net/21.15107/rcub_technorep_3774 .
Jovanović, Jelena, Stefanović, Andrea, Šekuljica, Nataša, Knežević-Jugović, Zorica, "Production of wheat gluten hydrolysates with improved functional properties: Optimization of operating parameters by statistical design" in Journal of Hygienic Engineering and Design, 24 (2018):90-100, https://hdl.handle.net/21.15107/rcub_technorep_3774 .