The initial characteristics of the polypyrrole based aqueous rechargeable batteries with supercapattery characteristics: Dataset
Апстракт
Figure captionsFig. 1. Cyclic voltammogram of the PPy electrode in 2 M NH4Cl and 1.1 M ZnCl2 a) Galvanostatic polymerization of pyrrole from 1 M HCl and 0.1 M pyrrole, b) Polarization curve (v = 1 mV s-1) of the zinc electrode in 2 M NH4Cl and 1.1 M ZnCl2.Fig. 2. a) The dependence of the PPy potentials over time on applied currents, b) The dependence of the voltage over time on applied currents of Zn|PPy cell.Fig. 3. The dependence of the charge-discharge capacity (left) and specific capacity (right) on applied current. Inset: Coulombic efficiency on applied current and specific current based on PPy mass.Fig. 4. Cyclization of the Zn|PPy cell. Inset: The dependence of the PPy specific charge-discharge capacity on cycle number.Fig. 5. Electrochemical formation of PPy, PbO2 and PbSO4Fig. 6. Cyclic voltammograms of the investigated materials in 1 M H2SO4 and 0.5 M (NH4)2SO4Fig. 7. Charge-discharge curves of the investigated materials for the different currents.Fig. 8. The dependence of ch...arge-discharge capacity (left) and specific capacity based on PPy mass (right) on applied current. Inset: The dependence of the Coulombic efficiency (C.E.), for PPy end discharge potentials of –1 V (○) and –0.45 V (), on specific discharge current. Fig. 9. Cyclization of the PPy|PbO2 cell with an applied current of 6 mA. Inset: dependence of the charge-discharge voltage on specific capacity based on PPy.Fig. 10. Cyclization of the PbSO4|PPy cell with an applied current of 6 mA. Inset: dependence of the charge-discharge voltage on specific capacity based on PPy.Fig. 11. The dependence of the charge-discharge voltages on the specific capacities based on active masses at a current of 6 mA (1 mA cm-2), of the investigated cells.
Извор:
2018Финансирање / пројекти:
Напомена:
- Supporting dataset for the article: Grgur, B.N., Janačković, M., Jugović, B.Z., Gvozdenović, M.M., 2019. The initial characteristics of the polypyrrole based aqueous rechargeable batteries with supercapattery characteristics. Materials Science and Engineering B: Solid-State Materials for Advanced Technology 243, 175–182. https://doi.org/10.1016/j.mseb.2019.04.013
Колекције
Институција/група
Tehnološko-metalurški fakultetTY - DATA AU - Grgur, Branimir PY - 2018 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3776 AB - Figure captionsFig. 1. Cyclic voltammogram of the PPy electrode in 2 M NH4Cl and 1.1 M ZnCl2 a) Galvanostatic polymerization of pyrrole from 1 M HCl and 0.1 M pyrrole, b) Polarization curve (v = 1 mV s-1) of the zinc electrode in 2 M NH4Cl and 1.1 M ZnCl2.Fig. 2. a) The dependence of the PPy potentials over time on applied currents, b) The dependence of the voltage over time on applied currents of Zn|PPy cell.Fig. 3. The dependence of the charge-discharge capacity (left) and specific capacity (right) on applied current. Inset: Coulombic efficiency on applied current and specific current based on PPy mass.Fig. 4. Cyclization of the Zn|PPy cell. Inset: The dependence of the PPy specific charge-discharge capacity on cycle number.Fig. 5. Electrochemical formation of PPy, PbO2 and PbSO4Fig. 6. Cyclic voltammograms of the investigated materials in 1 M H2SO4 and 0.5 M (NH4)2SO4Fig. 7. Charge-discharge curves of the investigated materials for the different currents.Fig. 8. The dependence of charge-discharge capacity (left) and specific capacity based on PPy mass (right) on applied current. Inset: The dependence of the Coulombic efficiency (C.E.), for PPy end discharge potentials of –1 V (○) and –0.45 V (), on specific discharge current. Fig. 9. Cyclization of the PPy|PbO2 cell with an applied current of 6 mA. Inset: dependence of the charge-discharge voltage on specific capacity based on PPy.Fig. 10. Cyclization of the PbSO4|PPy cell with an applied current of 6 mA. Inset: dependence of the charge-discharge voltage on specific capacity based on PPy.Fig. 11. The dependence of the charge-discharge voltages on the specific capacities based on active masses at a current of 6 mA (1 mA cm-2), of the investigated cells. T1 - The initial characteristics of the polypyrrole based aqueous rechargeable batteries with supercapattery characteristics: Dataset UR - https://hdl.handle.net/21.15107/rcub_technorep_3776 ER -
@misc{ author = "Grgur, Branimir", year = "2018", abstract = "Figure captionsFig. 1. Cyclic voltammogram of the PPy electrode in 2 M NH4Cl and 1.1 M ZnCl2 a) Galvanostatic polymerization of pyrrole from 1 M HCl and 0.1 M pyrrole, b) Polarization curve (v = 1 mV s-1) of the zinc electrode in 2 M NH4Cl and 1.1 M ZnCl2.Fig. 2. a) The dependence of the PPy potentials over time on applied currents, b) The dependence of the voltage over time on applied currents of Zn|PPy cell.Fig. 3. The dependence of the charge-discharge capacity (left) and specific capacity (right) on applied current. Inset: Coulombic efficiency on applied current and specific current based on PPy mass.Fig. 4. Cyclization of the Zn|PPy cell. Inset: The dependence of the PPy specific charge-discharge capacity on cycle number.Fig. 5. Electrochemical formation of PPy, PbO2 and PbSO4Fig. 6. Cyclic voltammograms of the investigated materials in 1 M H2SO4 and 0.5 M (NH4)2SO4Fig. 7. Charge-discharge curves of the investigated materials for the different currents.Fig. 8. The dependence of charge-discharge capacity (left) and specific capacity based on PPy mass (right) on applied current. Inset: The dependence of the Coulombic efficiency (C.E.), for PPy end discharge potentials of –1 V (○) and –0.45 V (), on specific discharge current. Fig. 9. Cyclization of the PPy|PbO2 cell with an applied current of 6 mA. Inset: dependence of the charge-discharge voltage on specific capacity based on PPy.Fig. 10. Cyclization of the PbSO4|PPy cell with an applied current of 6 mA. Inset: dependence of the charge-discharge voltage on specific capacity based on PPy.Fig. 11. The dependence of the charge-discharge voltages on the specific capacities based on active masses at a current of 6 mA (1 mA cm-2), of the investigated cells.", title = "The initial characteristics of the polypyrrole based aqueous rechargeable batteries with supercapattery characteristics: Dataset", url = "https://hdl.handle.net/21.15107/rcub_technorep_3776" }
Grgur, B.. (2018). The initial characteristics of the polypyrrole based aqueous rechargeable batteries with supercapattery characteristics: Dataset. . https://hdl.handle.net/21.15107/rcub_technorep_3776
Grgur B. The initial characteristics of the polypyrrole based aqueous rechargeable batteries with supercapattery characteristics: Dataset. 2018;. https://hdl.handle.net/21.15107/rcub_technorep_3776 .
Grgur, Branimir, "The initial characteristics of the polypyrrole based aqueous rechargeable batteries with supercapattery characteristics: Dataset" (2018), https://hdl.handle.net/21.15107/rcub_technorep_3776 .