TechnoRep - Faculty of Technology and Metallurgy Repository
University of Belgrade - Faculty of Technology and Metallurgy
    • English
    • Српски
    • Српски (Serbia)
  • English 
    • English
    • Serbian (Cyrillic)
    • Serbian (Latin)
  • Login
View Item 
  •   TechnoRep
  • Tehnološko-metalurški fakultet
  • Radovi istraživača / Researchers’ publications (TMF)
  • View Item
  •   TechnoRep
  • Tehnološko-metalurški fakultet
  • Radovi istraživača / Researchers’ publications (TMF)
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

Removal of Acid Textile Dye from the Aqueous Solution by a New Adsorbent Obtained from Waste Cotton from the Garment Plant

Authorized Users Only
2020
Authors
Micić, Aleksandra
Đorđević, Dragan
Janković-Častvan, Ivona
Ćirković, Nenad
Todorović, Bratislav
Article (Published version)
Metadata
Show full item record
Abstract
The paper investigates the possibility of removing acid dye from the aqueous solution by an adsorption process on new adsorbent prepared from waste cotton textile from the ready-made garment industry. It is a waste generated during the cutting of the layers of cotton knitwear, which is practically the product from the textile cutting process. The obtained adsorbent is a bulk material with heterogeneous porous particles, of ragged shapes. In particle interiors, there are pronounced cracks, cavities and channels that form the basis of microporous material. The qualitative and quantitative characterization of the obtained adsorbent shows that this is a relatively porous material where the carbon is dominant in the chemical composition. The results of textural properties of new adsorbent from cotton knitwear waste show different parameters which with their numerous values characterize the specific surface area, pore volume or pore diameter. It can be said that the obtained new adsorbent ha...s micropores and small mesopores, which produce a high specific surface area. During adsorption, the longer contact time causes a greater amount of dye on the adsorbent, i.e. with the duration of the adsorption process the dye concentration in the solution decreases. A number of isotherms of two- (Langmuir, Freundlich and Jovanovic), three- (Toth, Sips and Radke-Prausnitz), and four-parameter models (Fritz-Schlunder and Marczewski-Jaroniec) were used to describe the adsorption process. The four-parameter isotherms are best covered by experimental points and most accurately describe the events of adsorption of acid dye on the surface and in the interior of the new adsorbent particles obtained from ready made garment cotton waste. The results of this research suggest the possibility of practical application in the decolorization of the colored waste waters of the textile industry providing a contribution to protecting the environment from both an economic and a practical point of view.

Keywords:
adsorbent / acid dye / adsorption / modelling / ready-made garment
Source:
Journal of the Chemical Society of Pakistan, 2020, 42, 5, 728-736
Publisher:
  • Chem Soc Pakistan, Karachi

ISSN: 0253-5106

WoS: 000581120200010

[ Google Scholar ]
Handle
https://hdl.handle.net/21.15107/rcub_technorep_4430
URI
http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4430
Collections
  • Radovi istraživača / Researchers’ publications (TMF)
Institution/Community
Tehnološko-metalurški fakultet
TY  - JOUR
AU  - Micić, Aleksandra
AU  - Đorđević, Dragan
AU  - Janković-Častvan, Ivona
AU  - Ćirković, Nenad
AU  - Todorović, Bratislav
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4430
AB  - The paper investigates the possibility of removing acid dye from the aqueous solution by an adsorption process on new adsorbent prepared from waste cotton textile from the ready-made garment industry. It is a waste generated during the cutting of the layers of cotton knitwear, which is practically the product from the textile cutting process. The obtained adsorbent is a bulk material with heterogeneous porous particles, of ragged shapes. In particle interiors, there are pronounced cracks, cavities and channels that form the basis of microporous material. The qualitative and quantitative characterization of the obtained adsorbent shows that this is a relatively porous material where the carbon is dominant in the chemical composition. The results of textural properties of new adsorbent from cotton knitwear waste show different parameters which with their numerous values characterize the specific surface area, pore volume or pore diameter. It can be said that the obtained new adsorbent has micropores and small mesopores, which produce a high specific surface area. During adsorption, the longer contact time causes a greater amount of dye on the adsorbent, i.e. with the duration of the adsorption process the dye concentration in the solution decreases. A number of isotherms of two- (Langmuir, Freundlich and Jovanovic), three- (Toth, Sips and Radke-Prausnitz), and four-parameter models (Fritz-Schlunder and Marczewski-Jaroniec) were used to describe the adsorption process. The four-parameter isotherms are best covered by experimental points and most accurately describe the events of adsorption of acid dye on the surface and in the interior of the new adsorbent particles obtained from ready made garment cotton waste. The results of this research suggest the possibility of practical application in the decolorization of the colored waste waters of the textile industry providing a contribution to protecting the environment from both an economic and a practical point of view.
PB  - Chem Soc Pakistan, Karachi
T2  - Journal of the Chemical Society of Pakistan
T1  - Removal of Acid Textile Dye from the Aqueous Solution by a New Adsorbent Obtained from Waste Cotton from the Garment Plant
EP  - 736
IS  - 5
SP  - 728
VL  - 42
UR  - https://hdl.handle.net/21.15107/rcub_technorep_4430
ER  - 
@article{
author = "Micić, Aleksandra and Đorđević, Dragan and Janković-Častvan, Ivona and Ćirković, Nenad and Todorović, Bratislav",
year = "2020",
abstract = "The paper investigates the possibility of removing acid dye from the aqueous solution by an adsorption process on new adsorbent prepared from waste cotton textile from the ready-made garment industry. It is a waste generated during the cutting of the layers of cotton knitwear, which is practically the product from the textile cutting process. The obtained adsorbent is a bulk material with heterogeneous porous particles, of ragged shapes. In particle interiors, there are pronounced cracks, cavities and channels that form the basis of microporous material. The qualitative and quantitative characterization of the obtained adsorbent shows that this is a relatively porous material where the carbon is dominant in the chemical composition. The results of textural properties of new adsorbent from cotton knitwear waste show different parameters which with their numerous values characterize the specific surface area, pore volume or pore diameter. It can be said that the obtained new adsorbent has micropores and small mesopores, which produce a high specific surface area. During adsorption, the longer contact time causes a greater amount of dye on the adsorbent, i.e. with the duration of the adsorption process the dye concentration in the solution decreases. A number of isotherms of two- (Langmuir, Freundlich and Jovanovic), three- (Toth, Sips and Radke-Prausnitz), and four-parameter models (Fritz-Schlunder and Marczewski-Jaroniec) were used to describe the adsorption process. The four-parameter isotherms are best covered by experimental points and most accurately describe the events of adsorption of acid dye on the surface and in the interior of the new adsorbent particles obtained from ready made garment cotton waste. The results of this research suggest the possibility of practical application in the decolorization of the colored waste waters of the textile industry providing a contribution to protecting the environment from both an economic and a practical point of view.",
publisher = "Chem Soc Pakistan, Karachi",
journal = "Journal of the Chemical Society of Pakistan",
title = "Removal of Acid Textile Dye from the Aqueous Solution by a New Adsorbent Obtained from Waste Cotton from the Garment Plant",
pages = "736-728",
number = "5",
volume = "42",
url = "https://hdl.handle.net/21.15107/rcub_technorep_4430"
}
Micić, A., Đorđević, D., Janković-Častvan, I., Ćirković, N.,& Todorović, B.. (2020). Removal of Acid Textile Dye from the Aqueous Solution by a New Adsorbent Obtained from Waste Cotton from the Garment Plant. in Journal of the Chemical Society of Pakistan
Chem Soc Pakistan, Karachi., 42(5), 728-736.
https://hdl.handle.net/21.15107/rcub_technorep_4430
Micić A, Đorđević D, Janković-Častvan I, Ćirković N, Todorović B. Removal of Acid Textile Dye from the Aqueous Solution by a New Adsorbent Obtained from Waste Cotton from the Garment Plant. in Journal of the Chemical Society of Pakistan. 2020;42(5):728-736.
https://hdl.handle.net/21.15107/rcub_technorep_4430 .
Micić, Aleksandra, Đorđević, Dragan, Janković-Častvan, Ivona, Ćirković, Nenad, Todorović, Bratislav, "Removal of Acid Textile Dye from the Aqueous Solution by a New Adsorbent Obtained from Waste Cotton from the Garment Plant" in Journal of the Chemical Society of Pakistan, 42, no. 5 (2020):728-736,
https://hdl.handle.net/21.15107/rcub_technorep_4430 .

DSpace software copyright © 2002-2015  DuraSpace
About TechnoRep | Send Feedback

OpenAIRERCUB
 

 

All of DSpaceInstitutions/communitiesAuthorsTitlesSubjectsThis institutionAuthorsTitlesSubjects

Statistics

View Usage Statistics

DSpace software copyright © 2002-2015  DuraSpace
About TechnoRep | Send Feedback

OpenAIRERCUB