Претраживање
Приказ резултата 11-20 од 64
Nimonic 263 microstructure and surface characterization after laser shock peening
(Croatian Metallurgical Soc, Zagreb, 2015)
The Laser Shock Peening (LSP) is applied to the surface of Nimonic 263 alloy. The changes in microstructure and surface topography are observed and analyzed by Scanning Electron Microscopy (SEM), profilometer and microhardness ...
Investigation of electrochemical behavior of anisomycin on gold electrode followed by HPLC-MS/MS analysis
(Elsevier Science Inc, New York, 2015)
Anisomycin is an immunosuppressant in low doses ( lt 0.1 mu M) with possible application in treatment of some autoimmune diseases and in inhibiting transplantation rejection. Anisomycin suppresses malignant tumor cell ...
Ni-pd/al(2)o(3) catalyst supported on reticulated ceramic foam for dry methane reforming
(Savez inženjera metalurgije Srbije, Beograd, 2015)
In the present study, Ni-Pd/Al2O3 catalyst supported on alpha-Al2O3 based foam was prepared and evaluated in the dry methane reforming process. Corresponding metal chlorides were deposited to the foam surface by impregnation ...
In vitro conservation of cherry rootstock Gisela 5
(Natl Inst Science Communication-Niscair, New Delhi, 2015)
The paper presents results of the application of 'Cold Storage' (CS), a very simple in vitro technique preservation of cultures at +5 degrees C in total darkness. A protocol has been developed for in vitro preservation of ...
Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures
(Belgrade : Serbian Ceramic Society, 2015)
The influence of electrochemical conditions and the heat treatment on the crystal structure and the microstructure evolution of TiO2 based nanotubes synthesized by the self-ordering anodization process is investigated in ...
Structural diversities of mangancsc(II) complexes based on benzenedicarboxylate ions and 2,2'-dipyridylamine
(Int Union Crystallography, Chester, 2015)
Impact testing with controlled energy of multiaxial aramid fabrics with various types of reinforcement / Ispitivanje udarima kontrolisane energije multiaksijalnih aramidnih lamina sa različitim tipovima ojačanja
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The physical and mechanical properties of the six samples of polyurethane/p-aramid multiaxial fabric forms (Kolon fabrics) were analyzed by high speed impact tester. The samples were impregnated with 10 wt.% poly (vinyl ...
Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization
(Belgrade : Institute of Technical Sciences of SASA, 2015)
Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is ...
Decolorization of anthraquinonic dyes from textile effluent using horseradish peroxidase: Optimization and kinetic study
(Hindawi Limited, 2015)
Two anthraquinonic dyes, C.I. Acid Blue 225 and C.I. Acid Violet 109, were used as models to explore the feasibility of using the horseradish peroxidase enzyme (HRP) in the practical decolorization of anthraquinonic dyes ...
Chemical Binding of Chitosan and Chitosan Nanoparticles onto Oxidized Cellulose
(Sage Publications Ltd, London, 2015)
The aim of this study was to analyze binding of chitosan and chitosan nanoparticles onto cellulose via oxidized cellulose. The ability of chitosan and chitosan nanoparticles to be adsorbed onto surfaces was determined by ...