Претраживање
Приказ резултата 181-190 од 219
Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites
(Polymer Composites, 2021)
In this study, halloysite nanotubes (HNT) were modified by: 3-glycidyloxypropyltrimethoxysilane (GLYMO), 3-aminopropyltrimethoxysilane (APTES), and 2,2-Bis[4-(glycidyloxy) phenyl] propane (DGEBA), and incorporated in the ...
A rapid test to measure adhesion between optical fibers and ethylene-vinyl acetate copolymer (EVA)
(Elsevier Sci Ltd, Oxford, 2016)
Optical fibers are transported on a drum and on some occasions it is essential to fix them and to keep them fixed to the drum. Adhesives are used in such situations to obtain the best and durable fixation. This research ...
Advantage of use of activated flux-cored wire instead of solid wire with the mag welding process from the mechanical properties aspect
(Croatian Metallurgical Soc, Zagreb, 2013)
The objective of this paper is the analysis and evaluation of the quality of the new flux-cored wire designed for the MAG welding process that was developed and produced using special laboratory equipment. Experimental ...
Enzymatically derived oil-based L-ascorbyl esters: Synthesis, antioxidant properties and controlled release from cosmetic formulations
(Elsevier B.V., 2020)
Lipase-catalyzed transesterification of vitamin C by natural triglycerides is promising approach for cost-efficient synthesis of liposoluble food and cosmetic antioxidants. Nevertheless, application of these alternative ...
Solvent effects on structural changes in self-healing epoxy composites
(Elsevier Science Sa, Lausanne, 2020)
Nowadays, there is a very high importance of composite research and variety of their applications in the modern world. In that sense, we researched hollow glass capillaries filled with dissolved Grubbs catalyst (GC) and ...
Improvement in cavitation resistance of poly (vinyl butyral) composite films with silica nanoparticles: A technical note
(Polymers & Polymer Composites, 2021)
In this study poly (vinyl butyral)/silica (PVB/SiO2) composite films were subjected to the cavitation process. The experiments were carried out with a 10 wt.% PVB solution in ethanol. Silica nanoparticles were added into ...
Influence of Different Pretreatments on the Antibacterial Properties of Chitosan Functionalized Viscose Fabric: TEMPO Oxidation and Coating with TEMPO Oxidized Cellulose Nanofibrils
(MDPI, Basel, 2019)
The main objective of this study was to obtain chitosan functionalized viscose fabric with improved antibacterial properties and washing durability. In this regard carboxyl and aldehyde groups, as binding points for ...
Heat generation during plunge stage in friction stir welding
(Vinca Institute of Nuclear Sciences, 2013)
This paper deals with the heat generation in the Al alloy Al2024-T3 plate under different rotating speeds and plunge speeds during the plunge stage of friction stir welding. A 3-D finite element model is developed in the ...
Numerical and experimental approach to testing the adhesive properties of modified polymer blend based on EVA/PMMA as coatings for optical fibers
(Elsevier Sci Ltd, Oxford, 2017)
The adhesive properties of polymer blends based on poly(ethylene-co-vinyl acetate) (EVA) and poly(methyl methacrylate) (PMMA) were studied. Two samples were prepared, whereby one kind was a physically mixed blend of ...
Hydrometallurgical recovery of tin and lead from waste printed circuit boards (wpcbs): limitations and opportunities
(Croatian Metallurgical Soc, Zagreb, 2016)
In this paper, possibility for selective Pb and Sn recovery, using three different solutions of NaOH, HCl and HNO3, from WPCBs containing low concentrations of Pb and Sn is presented. According to obtained results, over ...