Претраживање
Приказ резултата 21-30 од 71
Anti-tarnish silver alloys in system ag-cu-zn-si with the addition of aluminum
(Association of Metallurgical Engineers of Serbia AMES, 2018)
This paper presents investigations of aluminum addition influence on the corrosion characteristics of the sterling silver Ag-Cu-Zn-Si alloys. The procedure for obtaining Ag-Cu-Zn-Al-Si alloys in small ranges of predefined ...
The effect of calcinated hydroxyapatite and magnesium doped hydroxyapatite as fillers on the mechanical properties of a model bisgma/tegdma dental composite initially and after aging
(Savez inženjera metalurgije Srbije, Beograd, 2018)
This study aimed to investigate the possibility of modifying model BisGMA/TEGDMA dental composite by substituting 10 wt. % of conventional glass fillers with bioactive fillers based on calcinated nanosized hydroxyapatite ...
Bisphenol a removal from aqueous solution using fine alpha-fe2o3 particles
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Iron(III) oxide particles (alpha-Fe2O3) were obtained from ferrous chloride (FeCl3 center dot 6H(2)O) precursor using ammonium hydroxide as a precipitating agent and particles were calcined at 700 degrees C for 4 h. ...
Defining the ideality of the protective masks by the mathematical modeling method / Određivanje idealnosti zaštitnih maski metodom matematičkog modelovanja
(University of Belgrade - Faculty of Mechanical Engineering, Belgrade, 2019)
Technical contradiction occurs when the system improves one parameter, which automatically causes the deterioration of some of its other parameters. In such a situation, instead of usual acceptance of the optimization of ...
Properties of cotton yarns after oxidation of potassium permanganate in an acidic environment / Svojstva pamučne pređe posle oksidacije kalijum-permanganatom u kiseloj sredini
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
The impact of nonselective cellulose oxidation (cotton fibre) by potassium permanganate in acidic environment, with or without additional treatment by sodium metabisulfite, on change of sorption (silver ions sorption), and ...
Structural properties of carbon microspheres obtained by hydrothermal treatment of fructose / Strukturne osobine mikrosfera ugljenika dobijenih hidrotermičkim tretmanom fruktoze
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
A carbon-rich solid product has been synthesized by hydrothermal treatment from fructose with HNO3 at temperature of 140°C. The concentration of the precursor was changed in order to investigate how its change influences ...
Graphene reinforced hydroxyapatite biocomposite coatings obtained by electrophoretic deposition on titanium / Biokompozitne prevlake hidroksiapatita ojačane grafenom, dobijene elektroforetskim taloženjem na titanu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Fast ongoing research of graphene-based nanomaterials reveals that their exceptional properties could be utized for biomedical applications, especially in tissue engineering and drug delivery. Here, we summarized the results ...
Ni-pd/al(2)o(3) catalyst supported on reticulated ceramic foam for dry methane reforming
(Savez inženjera metalurgije Srbije, Beograd, 2015)
In the present study, Ni-Pd/Al2O3 catalyst supported on alpha-Al2O3 based foam was prepared and evaluated in the dry methane reforming process. Corresponding metal chlorides were deposited to the foam surface by impregnation ...
Examination of the effectiveness of filtering half masks protection at various flow rates of aerosol contaminants / Ispitivanje efikasnosti zaštite filtrirajućih polumaski pri različitim protocima aerosolnih kontaminanata
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
The possibility of air contamination by biological agents, by natural or artificial way, requires the improvement and use of different means for respiratory protection. The paper presents comparative filtration efficiency ...
Aramid composites impregnated with different reinforcement: Nanofibers, nanoparticles and nanotubes / Aramidni kompoziti impregnisani sa različitim ojačanjima - nanovlakna, nanočestice i nanocevi
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
In this study, the electrospun nanofibers, nanoparticles and nanotubes were used as reinforcement in order to improve mechanical properties of materials for ballistic protection. The samples of polyurethane/p-aramid ...