Search
Now showing items 1-10 of 36
THE INFLUENCE OF THE QUANTITY OF ELASTANE AND SILICONE SOFTENER ON THE PROPERTIES OF DIFFERENTLY FINISHED COTTON AND COTTON/ELASTANE KNITS
(Zrenjanin : University of Novi Sad, Technical Faculty "Mihajlo Pupin", 2014)
The effects of the quantity of elastane and silicone softener on the properties of the single jersey
knitted fabrics were studied. Knitted fabrics of 100% cotton, and cotton/elastane, having elastane yarns in alternating ...
Age hardening potential of an Al-4.6 wt.% Mg alloy with Cu addition
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The ageing behavior of an Al-4.6Mg-0.54Cu (in wt.%) alloy was studied after: (i) solution
treatment for 1h at 530°C, and (ii) annealing at 280°C for 3h. Both groups of the heat treated
specimens underwent further ...
Mechanical properties of acrylate matrix composite reinforced with manganese-aluminum layered double hydroxide
(John Wiley and Sons Inc., 2023)
Acrylate polymers are used in several applications such as dentistry, medicine, and industry. The modification of their properties using the reinforcement is of key importance for the possible applications. Layered double ...
Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites
(Polymer Composites, 2021)
In this study, halloysite nanotubes (HNT) were modified by: 3-glycidyloxypropyltrimethoxysilane (GLYMO), 3-aminopropyltrimethoxysilane (APTES), and 2,2-Bis[4-(glycidyloxy) phenyl] propane (DGEBA), and incorporated in the ...
Influence of an accumulative roll bonding (ARB) process on the properties of AA5083 Al-Mg alloy sheets
(Association of Metallurgical Engineers of Serbia AMES, 2014)
In this study, fully annealed AA5083 type alloy sheets with 1 mm in thickness
were processed by accumulative roll bonding (ARB) at room temperature, up to 6 ARB
cycles. It was found that microstructure was refined and ...
Development of Coated Electrodes with Solid Wire and Flux-Cored Alloyed Wire for Microalloyed Steel Welding
(MDPI, Basel, 2020)
In this paper, we will present our investigation of the quality of J55 microalloyed steel welds that were formed by a basic flux-cored wire electrodes that were of appropriate quality and alloyed with Ni and Mo. Based on ...
Titanium dioxide nanoparticles surface modified with imine as fillers for epoxy resin / Nanočestice titan-dioksida površinski modifikovane iminom kao punioci za epoksidnu smolu
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2018)
The surface of anatase TiO2 nanoparticles was modified with in situ synthesized imine, based on 3,4-dihydroxybenzaldehyde and octadecylamine. The modified TiO2 nanoparticles were investigated using FTIR and UV-Vis spectroscopy, ...
Characterization of tantalum coatings deposited using vacuum plasma spray process / Karakterizacija tantal prevlake deponovane vakuum plazma sprej procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Tantalum is a very popular material for the industry as a whole because of very important characteristics such as: high melting point, significant thermal and electrical conductivity, high toughness and resistance to ...
Mechanical and structural features of Nb coating layers deposited on steel substrates in a vacuum chamber / Mehaničke i strukturne karakteristike slojeva prevlake Nb deponovane u vakuumu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
In this paper analyzed was the influence of implementation of inert Ar gas and a mixture of inert plasma Ar / He gases in a vacuum chamber on the deposition of reactive niobium (Nb) powder. The aim of this paper was to ...
THE INFLUENCE OF RHODIUM CONTENT ON THE MECHANICAL PROPERTIES OF PLATINUM
(Bor : Mining and Metallurgy Institute, 2015)
The paper presents the results of investigation the influence of rhodium as an alloying element on the mechanical properties of platinum. A short-term and tensile strength were tested, at room and high temperatures, and ...