Search
Now showing items 31-40 of 230
Influence of picosecond laser pulses on the microstructure of austenitic materials
(Springer, New York, 2011)
We investigate samples of austenitic materials - stainless steel and iron-based superalloy - which are widely used at high temperatures and pressures. The samples were exposed to Nd(3+):YAG laser pulses with a wavelength ...
The effect of accelerated aging on the mechanical properties of PMMA denture base materials modified with itaconates / Uticaj ubrzanog starenja na mehanička svojstva poli(metil-metakrilatnih) materijala za bazu zubnih proteza modifikovanih itakonatima
(Association of Chemical Engineers of Serbia, 2011)
This study evaluated the effect of accelerated aging on tensile strength, elongation at break, hardness and Charpy impact strength in commercial PMMA denture base material modified with di-methyl itaconate (DMI) and ...
Electrospun Poly(vinylbutyral)/silica Composite Fibres for Impregnation of Aramid Fabrics
(Materiale Plastice, 2014)
The poly (vinyl butyral)/silica (PVB/SiO2) composite fibers were produced by the electrospinning process. The experiments were performed with the PVB solution in concentration of 10 wt.% where ethanol was used as the ...
Wireless system for sleeper vibrations measurement
(Communications - Scientific Letters of the University of Zilina, 2014)
This paper describes testing of a wireless technique for measuring the actual sleeper vibrations and determination of their dynamic deflection based on the experimentally acquired acceleration data. Practical measurements ...
New records and noteworthy data of plants, algae and fungi in SE Europe and adjacent regions, 3
(Botanica Serbica, 2021)
This paper presents new records and noteworthy data on the following taxa in SE Europe and adjacent regions: parasitic fungus Antherospora hortensis, saprotrophic fungi Loweomyces fractipes and Pholiota henningsii, stonewort ...
Optimization of the ball mill processing parameters in the fat filling production
(Savez hemijskih inženjera, Beograd, 2017)
The aim of this study was to determine the effect of the main milling variables, i.e., agitator shaft speed (50, 75 and 100%, which is 25, 37.5 and 50 rpm) and milling time (30, 45 and 60 min) on physical and sensory ...
Formation of a large-area monolayer of polystyrene film via the spin-coating method
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2018)
The self-assembly methods, an inexpensive and high throughput technique capable of producing nanostructure arrays, relies on the formation on a monolayer of self-assembled nanospheres. This paper reports on the formation ...
Structural, spectral and thermal properties of 2-(2-pyridylamino)pyridinium trihydrogen pyromellitate / Структурна, спектрална и термичка својства 2-(2-пиридиламино)пиридиниjум-трихидрогенпиромелитата
(Srpsko hemijsko društvo, 2014)
The title compound, (Hdipya)(H(3)pyr), where Hdipya is protonated 2,2'-dipyridilamine and H(3)pyr is the monoanion of pyromellitic acid (H(4)pyr), was obtained from a reaction mixture containing Zn(II) ions, dipya, Na(4)pyr ...
Impermeable layers in landfill design / Prilog projektovanju vodonepropusnih slojeva deponija
(Association of Chemical Engineers of Serbia, 2013)
Landfills are complex systems that could potentially contaminate the environment. This needs to be prevented by providing impermeability during the landfill design. In this aim, the related regulations should be followed ...
Synthesis, antimicrobial and antioxidative activity of some new isatin derivatives
(Srpsko hemijsko društvo, Beograd, 2014)
The isatin derivatives, Schiff bases, were synthesized by the reaction of isatin and various substituted primary amines and characterized by several spectroscopic methods. Investigation of the antimicrobial activity of the ...