Претраживање
Приказ резултата 11-20 од 22
Solubility in the ternary system CaSO4 + Na2SO4 + H2O at 298.15 K
(Maik Nauka/Interperiodica/Springer, New York, 2011)
The solubility in the ternary system, aqueous mixture of CaSO4 and Na2SO4, at T = 298.15 K comprises five different salts: calcium sulfate dihydrate, mirabilite, thenardite, glauberite and labile salt. Using the Extended ...
Structural and mechanical properties of different hard welded coatings for impact plate for ventilation mill
(SUDURA Publishing House, 2011)
The enzyme separation plant modelling, design and optimization
(International Journal of Mathematical Models and Methods in Applied Sciences, 2011)
A new approach for plant model building was illustrated. The use of flowsheeting in design, however, differs from its use in operations and this should be reflected in the development of the simulation procedure. In design, ...
Application of electrochemical methods for the investigation of intergranular corrosion of welded joint of austenitic stainless steel 19cr-9ni
(Savez hemijskih inženjera, Beograd, 2011)
The sensitization degree of austenitic stainless steel welded joints was investigated by electrochemical methods of the double loop electrochemical potentiokinetic reactivation (DL EPR) in H(2)SO(4) + KSCN solution, and ...
Influence of Microwave Heating on the Polymerization Kinetics and Application Properties of the PMMA Dental Materials
(Wiley, Hoboken, 2011)
The effects of heating mode (conventional isothermal heating (CIH) and microwave isothermal heating (MWIH) on the kinetics of polymerization and the properties important for the application (residual monomer, hardness, and ...
A study of the removal of copper ions from aqueous solution using clinoptilolite from Serbia
(Springer, New York, 2011)
Toxic metal contamination of waste waters can be mitigated by metal adsorption to clay and zeolitic minerals, but in developing countries such environmental remediation can be cost prohibitive if these minerals are not ...
Distribution of loads of cycloid speed reducer
(University of Timisoara, Transactions on Mechanics, 2011)
Cycloidal speed reducer belongs to the generation of modern planetary gears. It main features are:
high transmission ratio, compact design, long and reliable working life, high efficiency, possibility of accepting
big ...
Numerical simulation of the plunge stage in friction stir welding / Numerička simulacija faze uranjanja kod zavarivanja trenjem mešanjem
(Society for Structural Integrity and Life, Institute for Material Testing, 2011)
This paper investigates the plunge stage using numerical modeling. A three-dimensional finite element model (FEM) of the plunge stage is developed using the commercial code ABAQUS to study the thermo-mechanical processes ...
Numerical simulation of the plunge stage in friction stir welding alloys EN AW 2024 T 351 and EN AW 7049A T 652 / Numerička simulacija faze probijanja postupka zavarivanja trenjem mešanjem legura EN AW 2024 T 351 i EN AW 7049A T 652
(Univerzitet u Novom Sadu - Fakultet tehničkih nauka - Institut za proizvodno mašinstvo, Novi Sad, 2011)
This paper investigates the plunge stage using numerical modeling. Change of temperature and plunge force have been analyzed during the plunge stage of the FSW procedure for high hardness aluminum alloys EN AW 2024 T 351 ...
Waste reduction algorithm used as the case study of simulated bitumen production process
(Association of the Chemical Engineers of Serbia, 2011)
Algoritam za redukciju otpada (eng. waste reduction algorithm – WAR) jeste metodologija
koja se može koristiti za procenu potencijalnog uticaja tehnoloških procesa na životnu
sredinu. Analizom pojedinačnih stupnjeva ...