Претраживање
Приказ резултата 21-30 од 35
Mechanical properties of alginate-liposomes-based beads with encapsulated resveratrol / Mehaničke karakteristike čestica alginat-lipozomi sa inkapsuliranim resveratrolom
(Faculty of Technology, Zvornik, 2015)
In this work mechanical behavior of four different formulations of alginate-based beads was
tested. The alginate beads were prepared by means of extrusion technique. As a model
encapsulated bioactive substance ...
Mechanical properties of composites based on unsaturated polyester resins obtained by chemical recycling of poly(ethylene terephthalate) / Mehanička svojstva kompozita na bazi nezasićenih poliestarskih smola dobijenih hemijskom reciklažom poli(etilen-tereftalata)
(Association of Chemical Engineers of Serbia, 2013)
Composites based on unsaturated polyester (UPe) resins and fumed silica AEROSIL® RY 50, NY 50, RX 50 and NAX 50, as well as graphite, TiO2 or organically modified clay CLOISITE 30B were prepared in order to investigate the ...
Characterization of tantalum coatings deposited using vacuum plasma spray process / Karakterizacija tantal prevlake deponovane vakuum plazma sprej procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Tantalum is a very popular material for the industry as a whole because of very important characteristics such as: high melting point, significant thermal and electrical conductivity, high toughness and resistance to ...
Mechanical and structural features of Nb coating layers deposited on steel substrates in a vacuum chamber / Mehaničke i strukturne karakteristike slojeva prevlake Nb deponovane u vakuumu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
In this paper analyzed was the influence of implementation of inert Ar gas and a mixture of inert plasma Ar / He gases in a vacuum chamber on the deposition of reactive niobium (Nb) powder. The aim of this paper was to ...
Age hardening potential of an Al-4.6 wt.% Mg alloy with Cu addition
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The ageing behavior of an Al-4.6Mg-0.54Cu (in wt.%) alloy was studied after: (i) solution
treatment for 1h at 530°C, and (ii) annealing at 280°C for 3h. Both groups of the heat treated
specimens underwent further ...
Influence of an accumulative roll bonding (ARB) process on the properties of AA5083 Al-Mg alloy sheets
(Association of Metallurgical Engineers of Serbia AMES, 2014)
In this study, fully annealed AA5083 type alloy sheets with 1 mm in thickness
were processed by accumulative roll bonding (ARB) at room temperature, up to 6 ARB
cycles. It was found that microstructure was refined and ...
Studying the influence of common wet processes on the quality of 1 × 1 rib cotton/elastane knitted fabrics
(SAGE Publications Ltd, 2022)
This research studied the influence of common wet processes (i.e. bleaching, dyeing, or softening) on the quality of 1 × 1 rib cotton/elastane knitted fabrics. The changes in their structural (thickness, weight, and stitch ...
Examination of mechanical properties of acrilyc composite materials with different AL2O3 reinforcement by brazil test / Ispitivanje mehaničkih svojstava akrilatnih kompozitnih materijala sa različitim AL2O3 ojačanjima brazilskim testom
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Composite materials based on UV-curing acrylates and various alumina-based reinforcements represent material that is suitable for the use in dentistry, but also in other areas. Composites were made using four different ...
The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer
(Wiley, Hoboken, 2021)
As a renewable resource, starch is considered to be fully biodegradable and nonpolluting to the environment but the hygroscopicity of starch is the main disadvantage for wider applicability in the production of a polymer-based ...
Development of Coated Electrodes with Solid Wire and Flux-Cored Alloyed Wire for Microalloyed Steel Welding
(MDPI, Basel, 2020)
In this paper, we will present our investigation of the quality of J55 microalloyed steel welds that were formed by a basic flux-cored wire electrodes that were of appropriate quality and alloyed with Ni and Mo. Based on ...