Претраживање
Приказ резултата 11-20 од 159
Removal of copper(II) ion from aqueous solution by high-porosity activated carbon
(Water Research Commission, Pretoria, 2013)
The removal of copper(II) ion from aqueous solution by the granular activated carbon, obtained from hazelnut shells (ACHS) (Corylus avellana L. var. lunga istriana), was investigated. The ACHS was prepared from ground dried ...
Adsorption of azo dyes on polymer materials / Adsorpcija azo boja na polimernim materijalima
(Association of Chemical Engineers of Serbia, 2013)
The use of polymeric adsorbents for the removal of azo dyes from solution has been reviewed. Adsorption techniques are widely used to remove certain classes of pollutants from waters, especially those which are not easily ...
Development of RuO2/TiO2 titanium anodes and a device for in situ active chlorine generation / Razvoj titanskih RuO2/TiO2 anoda i uređaja za in situ proizvodnju aktivnog hlora
(Association of Chemical Engineers of Serbia, 2013)
Chlorine is used worldwide for water disinfection purposes. However, due to its toxicity the EU has imposed a set of standards that must be applied when transporting and storing chlorine. In Serbia, numerous studies have ...
The impact of manufacturing process on the content of hard triglycerides, hardness and thermal properties of milk chocolate
(Savez hemijskih inženjera, Beograd, 2012)
The rheological and physical properties of the chocolate mass depend on the ingredient composition as well as the manufacturing process. For the purpose of this work, a milk chocolate mass of identical composition and raw ...
Thermal resistance testing of standard and protective filtering military garment on the burning napalm mixture / Testiranje termičke otpornosti standardne i filtrirajuće zaštitne vojničke uniforme na goruću napalm smešu
(Association of Chemical Engineers of Serbia, 2013)
Fires are an accompanying manifestation in modern weaponry use and in various accidents in peacetime. The standard military uniform is a primary barrier in protection of a soldier's body from all external influences, ...
Simultaneity analysis in a wireless sensor network
(Polska Akad Nauk, Polish Acad Sciences, Warszawa, 2015)
An original wireless sensor network for vibration measurements was designed. Its primary purpose is modal analysis of vibrations of large structures. A number of experiments have been performed to evaluate the system, with ...
The effect of accelerated aging on the mechanical properties of PMMA denture base materials modified with itaconates / Uticaj ubrzanog starenja na mehanička svojstva poli(metil-metakrilatnih) materijala za bazu zubnih proteza modifikovanih itakonatima
(Association of Chemical Engineers of Serbia, 2011)
This study evaluated the effect of accelerated aging on tensile strength, elongation at break, hardness and Charpy impact strength in commercial PMMA denture base material modified with di-methyl itaconate (DMI) and ...
Wireless system for sleeper vibrations measurement
(Communications - Scientific Letters of the University of Zilina, 2014)
This paper describes testing of a wireless technique for measuring the actual sleeper vibrations and determination of their dynamic deflection based on the experimentally acquired acceleration data. Practical measurements ...
New records and noteworthy data of plants, algae and fungi in SE Europe and adjacent regions, 3
(Botanica Serbica, 2021)
This paper presents new records and noteworthy data on the following taxa in SE Europe and adjacent regions: parasitic fungus Antherospora hortensis, saprotrophic fungi Loweomyces fractipes and Pholiota henningsii, stonewort ...
Optimization of the ball mill processing parameters in the fat filling production
(Savez hemijskih inženjera, Beograd, 2017)
The aim of this study was to determine the effect of the main milling variables, i.e., agitator shaft speed (50, 75 and 100%, which is 25, 37.5 and 50 rpm) and milling time (30, 45 and 60 min) on physical and sensory ...