Претраживање
Приказ резултата 501-510 од 511
Gadolinium sorption on multi-walled carbon nanotubes / Sorpcija gadolinijuma na višeslojnim ugljeničnim nanotubama
(Academy of Sciences and Arts of the Republic of Srpska, 2019)
Rare earth metals are deemed to be the materials of future due to their numerous applications including medical diagnostics, nuclear facilities, petroleum industry, etc. In this paper, multi-walled carbon nanotubes, which ...
Morphology of Nanotubular Oxide Layer Formation on Titanium and Titanium Alloy Using Electrochemical Anodization
(Belgrade : Serbian Academy of Sciences and Arts, 2018)
A coupled thermo-mechanical model of friction stir welding
(Vinca Institute of Nuclear Sciences, 2012)
A coupled thermo-mechanical model was developed to study the temperature fields, the plunge force and the plastic deformations of Al alloy 2024-T351 under different rotating speed: 350, 400, and 450 rpm, during the friction ...
Electrophysical properties of nonwoven viscose/polypropylene fabrics
(Skopje : Society of chemists and technologists of Macedonia, 2018)
Textile materials like woven, knitted and nonwoven fabrics are good insulators with very high
electrical resistance. It is known that dielectric properties (effective dielectric permeability, electrical
conductivity, and ...
Biosorption of Cu2+ from aqueous solution by alkali modified waste jute woven fabrics
(Belgrade : Institute of Technical Sciences of SASA, 2019)
Waste jute fabrics (raw and alkali modified), acquired as waste from different industries
were used as an efficient biosorbent for removal of Cu
2+
ions from aqueous solution. All
woven jute fabrics (raw as well as ...
Removal of Pb2+ from aqueous solution by P(HEA/IA) hydrogels
(Savez hemijskih inženjera, Beograd, 2016)
A series of poly(2-hydroxyethyl acrylate-co-itaconic acid), P(HEA/IA), hydrogels with different HEA/IA ratio, were synthesized using free radical crosslinking/copolymerization and investigated as sorbents for Pb2+ from ...
Exploitation properties of ni-pd/al2o3 catalyst supported on ceramic foam
(Savez inženjera metalurgije Srbije, Beograd, 2015)
The goal of this research was to examine exploitation properties of Ni-Pd/Al2O3 catalyst supported on alpha-Al2O3 based foam in the dry methane reforming. The catalyst was prepared by using aerosol method. Chloride precursors ...
THE INFLUENCE OF RHODIUM CONTENT ON THE MECHANICAL PROPERTIES OF PLATINUM
(Bor : Mining and Metallurgy Institute, 2015)
The paper presents the results of investigation the influence of rhodium as an alloying element on the mechanical properties of platinum. A short-term and tensile strength were tested, at room and high temperatures, and ...
Improvement of cavitation resistance of composite films using functionalized alumina particles
(Savez hemijskih inženjera, Beograd, 2018)
Composite films having the UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina (Al2O3 Fe) based particles were prepared and subjected ...
The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate / Uticaj oblika i veličine čestica AL2O3 na savojna svojstva PMMA kompozita modifikovanog dodatkom dimetil itakonata
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Dental materials have specific requirements regarding behavior in exploitation conditions. Poly (methyl methacrylate) (PMMA) is one of the most commonly used prosthetic materials. It is of interest to improve the mechanical ...