Претраживање
Приказ резултата 11-20 од 1024
Hydrometallurgical process for extraction of metals from electronic waste, part II: Development of the processes for the recovery of copper from printed circuit boards (PCB)
(Savez inženjera metalurgije Srbije, Beograd, 2011)
Rapid technological development induces increase of generation of used electric and electronic equipment waste, causing a serious threat to the environment. Waste printed circuit boards (WPCBs), as the main component of ...
Sitting position awake craniostomy with drainage for chronic subdural hematoma: a viable alternative?
(Vojnosanitetski Pregled, 2021)
Background/Aim. Chronic subdural hematoma (CSDH) is one of the most frequent neurosurgical conditions with an overall incidence ranging from 1.72 to 20.6 per 100,000 persons per year. The surgical procedure for CSDH is ...
GEOSPATIAL MAPPING OF ECOLOGICAL RISK FROM POTENTIALLY TOXIC ELEMENTS IN SOIL IN THE PANNONIAN-CARPATHIAN BORDER AREA SOUTH OF THE DANUBE
(Carpathian Association of Environment and Earth Sciences, 2022)
This study collected agricultural surface soil samples from 200 sites in the district of Braničevo, located in the Carpathian Mountains – Pannonian Basin south of the Danube River (Serbia). The main objective was to determine ...
Preliminary studies on controlled release of acetylsalycilic acid from membrane module
(Association of Chemical Engineers of Serbia, 2004)
Corrosion Stability of Corrosion Products on an Archaeological Iron Artefact
(Alexandru Ioan Cuza University Publiching House Iasi-Romania, 2012)
A spearhead of archaeological and cultural significance has been found and analysed in
Serbia. In the corrosion products of the artefact, the dominant phases were goethite (α-
FeO(OH)) and magnetite (Fe3O4) whose presence ...
Crack propagation in 3PB specimen made from welded joint
(1st Virtual European Conference on Fracture - Vecf1, 2020)
Crack propagation in 3PB specimen has been investigated experimentally by using Digital Image Correlation (DIC) technique. For this purpose, specimens were taken from butt welded plates, made of P460NL1 micro-alloyed steel. ...
Investigation of thermodynamic properties and phase equilibria in Ag-In-Sn system / Ispitivanje termodinamičkih veličina i faznih ravnoteža u sistemu Ag-In-Sn
(Savez inženjera i tehničara Srbije, Beograd, 2006)
Lead - free soldering became very popular in the whole world, because of high ecological demands in industry. Most of alternative alloys have high content of tin, and some of them are already used in electronic industry. ...
Sorption of Cu2+ and Co2+ from aqueous solutions onto sepiolite: An equilibrium, kinetic and thermodynamic study / Sorpcija jona bakra i kobalta iz vodenih rastvora na sepiolitu, ispitivanje ravnoteže, kinetike i termodinamike sorpcije
(Serbian Chemical Society, Belgrade, 2011)
The efficiency of natural sepiolite for the removal of Cu2+ and Co2+ from aqueous solution was determined using the batch method. The sorption experiments were performed as a function of the initial metal concentration, ...
The analysis of forming PVB-SiO2 nanocomposite fibers by the electrospinning process / Analiza formiranja PVB-SiO2 nanokompozitnih vlakana pomoću elektrospining procesa
(Military Technical Institute, Belgrade, 2011)
The poly (vinyl butyral)-silica (PVB-SiO2) nanofibers were obtained by the electrospinning process. The experiments were carried out with PVB solution in concentration of 10 wt.% where ethanol was used as the solvent. The ...
Hydrometallurgical process for extraction of metals from electronic waste, Part I: Material characterization and process option selection
(Savez inženjera metalurgije Srbije, Beograd, 2009)
Used electronic equipment became one of the fastest growing waste streams in the world. In the past two decades recycling of printed circuit boards (PCBs) has been based on pyrometallurgy, highly polluting recycling ...