Search
Now showing items 1-10 of 730
Simultaneity analysis in a wireless sensor network
(Polska Akad Nauk, Polish Acad Sciences, Warszawa, 2015)
An original wireless sensor network for vibration measurements was designed. Its primary purpose is modal analysis of vibrations of large structures. A number of experiments have been performed to evaluate the system, with ...
Removal of copper(II) ion from aqueous solution by high-porosity activated carbon
(Water Research Commission, Pretoria, 2013)
The removal of copper(II) ion from aqueous solution by the granular activated carbon, obtained from hazelnut shells (ACHS) (Corylus avellana L. var. lunga istriana), was investigated. The ACHS was prepared from ground dried ...
The analysis of forming PVB-SiO2 nanocomposite fibers by the electrospinning process / Analiza formiranja PVB-SiO2 nanokompozitnih vlakana pomoću elektrospining procesa
(Vojnotehnički institut, Beograd, 2011)
The poly (vinyl butyral)-silica (PVB-SiO2) nanofibers were obtained by the electrospinning process. The experiments were carried out with PVB solution in concentration of 10 wt.% where ethanol was used as the solvent. The ...
Synthesis and characterization of silver/poly(N-vinyl-2-pyrrolidone) hydrogel nanocomposite obtained by in situ radiolytic method
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This work describes radiolytic synthesis of silver nanoparticles (Ag NPs) within the poly(N-vinyl-2-pyrrolidone) (PVP) hydrogel. The hydrogel matrix was obtained by gamma irradiation-induced cross-linking, while the in ...
Thermal resistance testing of standard and protective filtering military garment on the burning napalm mixture / Testiranje termičke otpornosti standardne i filtrirajuće zaštitne vojničke uniforme na goruću napalm smešu
(Association of Chemical Engineers of Serbia, 2013)
Fires are an accompanying manifestation in modern weaponry use and in various accidents in peacetime. The standard military uniform is a primary barrier in protection of a soldier's body from all external influences, ...
The formation of oxide nanoparticles on the surface of natural clinoptilolite
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
Nanoparticles of NiO, ZnO and Cu(2)O crystallize when the Ni-, Zn- and Cu-exchanged natural clinoptilolite, respectively, are dehydrated by heating in air at 550 degrees C. The dehydration of Mn-exchanged clinoptilolite ...
Functionalization of thermo-acid activated sepiolite by amine-silane and mercapto-silane for chromium(VI) adsorption from aqueous solutions / Adsorpcija hroma(VI) iz vodenih rastvora na termo-kiselinski aktiviranom sepiolitu funkcionalizovanom amino-silanom i merkapto-silanom
(Association of Chemical Engineers of Serbia, 2013)
Chromium(VI) adsorption from aqueous solutions onto thermo-acid activated sepiolite functionalized with (3-mercaptopropyl)trimethoxy-silane and [3-(2-aminoethylamino)propyl]trimethoxy-silane was investigated. Scanning ...
Short-circuit oxygen diffusion in thermally grown silica layer
(World Scientific Publ Co Pte Ltd, Singapore, 2010)
Amorphous polymer-derived Si-C-N ceramics can be doped with different elements (Al, B etc.) through various pre-ceramic polymer routes. Thus, controlling of the high temperature oxidation resistance can be achieved on an ...
The effect of accelerated aging on the mechanical properties of PMMA denture base materials modified with itaconates / Uticaj ubrzanog starenja na mehanička svojstva poli(metil-metakrilatnih) materijala za bazu zubnih proteza modifikovanih itakonatima
(Association of Chemical Engineers of Serbia, 2011)
This study evaluated the effect of accelerated aging on tensile strength, elongation at break, hardness and Charpy impact strength in commercial PMMA denture base material modified with di-methyl itaconate (DMI) and ...
Influence of picosecond laser pulses on the microstructure of austenitic materials
(Springer, New York, 2011)
We investigate samples of austenitic materials - stainless steel and iron-based superalloy - which are widely used at high temperatures and pressures. The samples were exposed to Nd(3+):YAG laser pulses with a wavelength ...