Претраживање
Приказ резултата 1-10 од 32
The analysis of forming PVB-SiO2 nanocomposite fibers by the electrospinning process / Analiza formiranja PVB-SiO2 nanokompozitnih vlakana pomoću elektrospining procesa
(Vojnotehnički institut, Beograd, 2011)
The poly (vinyl butyral)-silica (PVB-SiO2) nanofibers were obtained by the electrospinning process. The experiments were carried out with PVB solution in concentration of 10 wt.% where ethanol was used as the solvent. The ...
Synthesis and characterization of silver/poly(N-vinyl-2-pyrrolidone) hydrogel nanocomposite obtained by in situ radiolytic method
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This work describes radiolytic synthesis of silver nanoparticles (Ag NPs) within the poly(N-vinyl-2-pyrrolidone) (PVP) hydrogel. The hydrogel matrix was obtained by gamma irradiation-induced cross-linking, while the in ...
The formation of oxide nanoparticles on the surface of natural clinoptilolite
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
Nanoparticles of NiO, ZnO and Cu(2)O crystallize when the Ni-, Zn- and Cu-exchanged natural clinoptilolite, respectively, are dehydrated by heating in air at 550 degrees C. The dehydration of Mn-exchanged clinoptilolite ...
Novel hydrogel nanocomposites based on alginate and silver nanoparticles
(24th European Conference on Biomaterials, EBS 2011, 2011)
Biomechanical properties of alginate hydrogels in a biomimetic bioreactor for cartilage tissue engineering
(24th European Conference on Biomaterials, EBS 2011, 2011)
The effect of accelerated aging on the mechanical properties of PMMA denture base materials modified with itaconates / Uticaj ubrzanog starenja na mehanička svojstva poli(metil-metakrilatnih) materijala za bazu zubnih proteza modifikovanih itakonatima
(Association of Chemical Engineers of Serbia, 2011)
This study evaluated the effect of accelerated aging on tensile strength, elongation at break, hardness and Charpy impact strength in commercial PMMA denture base material modified with di-methyl itaconate (DMI) and ...
Influence of picosecond laser pulses on the microstructure of austenitic materials
(Springer, New York, 2011)
We investigate samples of austenitic materials - stainless steel and iron-based superalloy - which are widely used at high temperatures and pressures. The samples were exposed to Nd(3+):YAG laser pulses with a wavelength ...
Structural and mechanical properties of different hard welded coatings for impact plate for ventilation mill
(SUDURA Publishing House, 2011)
Application of electrochemical methods for the investigation of intergranular corrosion of welded joint of austenitic stainless steel 19cr-9ni
(Savez hemijskih inženjera, Beograd, 2011)
The sensitization degree of austenitic stainless steel welded joints was investigated by electrochemical methods of the double loop electrochemical potentiokinetic reactivation (DL EPR) in H(2)SO(4) + KSCN solution, and ...
The enzyme separation plant modelling, design and optimization
(International Journal of Mathematical Models and Methods in Applied Sciences, 2011)
A new approach for plant model building was illustrated. The use of flowsheeting in design, however, differs from its use in operations and this should be reflected in the development of the simulation procedure. In design, ...