Show simple item record

dc.creatorSavic, Veljko
dc.creatorTopalovic, Vladimir
dc.creatorMatijasevic, Srdan
dc.creatorNikolic, Jelena
dc.creatorGrujić, Snežana
dc.creatorZildzovic, Snezana
dc.creatorRadulovic, Aleksandra
dc.date.accessioned2022-03-04T11:22:22Z
dc.date.available2022-03-04T11:22:22Z
dc.date.issued2021
dc.identifier.issn2217-8961
dc.identifier.urihttp://TechnoRep.tmf.bg.ac.rs/handle/123456789/4890
dc.description.abstractIn this study, the glass-composite was prepared using glass cullet and waste foundry sand as raw materials. The powder technology route was employed. The mixtures containing 10-50 wt% of the sand were sintered at T = 750 degrees C for t =1h. XRD and DTA analyses were performed. The chemical durability of the resulting glass-composite was determined by leaching test in HCl, H2SO4, NaOH and distilled water at T = 95 degrees C for t =1h. It was shown that the sintering process carried out without the crystallization of the glass matrix. The lowest chemical durability was determined in alkali solution of glasscomposite.en
dc.relationinfo:eu-repo/grantAgreement/MESTD/inst-2020/200023/RS//
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.sourceMetallurgical & Materials Engineering
dc.subjectglass culleten
dc.subjectwaste foundry sanden
dc.subjectsinteringen
dc.subjectglass-compositeen
dc.titleChemical durability of sintered glass-composite prepared from glass cullet and waste foundry sanden
dc.typearticle
dc.rights.licenseBY
dc.citation.epage113
dc.citation.issue1
dc.citation.other27(1): 105-113
dc.citation.rankM24
dc.citation.spage105
dc.citation.volume27
dc.identifier.doi10.30544/477
dc.identifier.fulltexthttp://TechnoRep.tmf.bg.ac.rs/bitstream/id/7625/Chemical_durability_of_pub_2021.pdf
dc.identifier.rcubconv_6072
dc.identifier.scopus2-s2.0-85104000253
dc.identifier.wos000636434600008
dc.type.versionpublishedVersion


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record