Denture composite reinforced with short polyethylene terephthalate fibers
Samo za registrovane korisnike
2022
Autori
Perišić, SrđanKareem Ali Alzaroug, Azdihar
Kalevski, Katarina
Vuksanović, Marija M.
Volkov-Husović, Tatjana
Radović, Ivana
Radojević, Vesna
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Polymer matrix composite materials have found application in dentistry because of good mechanical properties, aesthetic, easy processing, and possibilities of the repair. Acrylates are materials used to make and repair dentures. Reinforcements in the form of short glass or polymer fibers are added to improve the mechanical properties of dental polymers. In this study, the processing of composite material with a polymer matrix from commercial auto-polymerized acrylate Simgal, with reinforcement in the form of short poly(ethylene terephthalate) (PET) fibers was examined. Samples were processed in three series: pure Simgal, Simgal/PET 1 wt% and Simgal/PET 3 wt%. The influence of the reinforcement in the form of short PET fibers on the mechanical properties of composite materials was investigated. Strength and hardness were tested by impact testing and Vickers microhardness, and it was shown that there is an increase in absorbed energy and hardness. The modulus was reduced by the addition ...of PET fibers and by increasing the amount of fibers in the composite. The increase in the amount of PET fibers also resulted in a smaller loss of surface mass of the samples compared to the pure matrix by 63% and 93%, respectively. Cavitation test revealed better cavitation resistance of composites than the pure acrylate.
Ključne reči:
cavitation erosion / composite materials / mechanical properties / PET fibersIzvor:
Polymer Composites, 2022, 43, 1, 543-550Izdavač:
- John Wiley and Sons Inc.
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200135 (Univerzitet u Beogradu, Tehnološko-metalurški fakultet) (RS-MESTD-inst-2020-200135)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200287 (Inovacioni centar Tehnološko-metalurškog fakulteta u Beogradu doo) (RS-MESTD-inst-2020-200287)
DOI: 10.1002/pc.26397
ISSN: 0272-8397
WoS: 000718337500001
Scopus: 2-s2.0-85119357559
Kolekcije
Institucija/grupa
Inovacioni centarTY - JOUR AU - Perišić, Srđan AU - Kareem Ali Alzaroug, Azdihar AU - Kalevski, Katarina AU - Vuksanović, Marija M. AU - Volkov-Husović, Tatjana AU - Radović, Ivana AU - Radojević, Vesna PY - 2022 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4972 AB - Polymer matrix composite materials have found application in dentistry because of good mechanical properties, aesthetic, easy processing, and possibilities of the repair. Acrylates are materials used to make and repair dentures. Reinforcements in the form of short glass or polymer fibers are added to improve the mechanical properties of dental polymers. In this study, the processing of composite material with a polymer matrix from commercial auto-polymerized acrylate Simgal, with reinforcement in the form of short poly(ethylene terephthalate) (PET) fibers was examined. Samples were processed in three series: pure Simgal, Simgal/PET 1 wt% and Simgal/PET 3 wt%. The influence of the reinforcement in the form of short PET fibers on the mechanical properties of composite materials was investigated. Strength and hardness were tested by impact testing and Vickers microhardness, and it was shown that there is an increase in absorbed energy and hardness. The modulus was reduced by the addition of PET fibers and by increasing the amount of fibers in the composite. The increase in the amount of PET fibers also resulted in a smaller loss of surface mass of the samples compared to the pure matrix by 63% and 93%, respectively. Cavitation test revealed better cavitation resistance of composites than the pure acrylate. PB - John Wiley and Sons Inc. T2 - Polymer Composites T1 - Denture composite reinforced with short polyethylene terephthalate fibers EP - 550 IS - 1 SP - 543 VL - 43 DO - 10.1002/pc.26397 ER -
@article{ author = "Perišić, Srđan and Kareem Ali Alzaroug, Azdihar and Kalevski, Katarina and Vuksanović, Marija M. and Volkov-Husović, Tatjana and Radović, Ivana and Radojević, Vesna", year = "2022", abstract = "Polymer matrix composite materials have found application in dentistry because of good mechanical properties, aesthetic, easy processing, and possibilities of the repair. Acrylates are materials used to make and repair dentures. Reinforcements in the form of short glass or polymer fibers are added to improve the mechanical properties of dental polymers. In this study, the processing of composite material with a polymer matrix from commercial auto-polymerized acrylate Simgal, with reinforcement in the form of short poly(ethylene terephthalate) (PET) fibers was examined. Samples were processed in three series: pure Simgal, Simgal/PET 1 wt% and Simgal/PET 3 wt%. The influence of the reinforcement in the form of short PET fibers on the mechanical properties of composite materials was investigated. Strength and hardness were tested by impact testing and Vickers microhardness, and it was shown that there is an increase in absorbed energy and hardness. The modulus was reduced by the addition of PET fibers and by increasing the amount of fibers in the composite. The increase in the amount of PET fibers also resulted in a smaller loss of surface mass of the samples compared to the pure matrix by 63% and 93%, respectively. Cavitation test revealed better cavitation resistance of composites than the pure acrylate.", publisher = "John Wiley and Sons Inc.", journal = "Polymer Composites", title = "Denture composite reinforced with short polyethylene terephthalate fibers", pages = "550-543", number = "1", volume = "43", doi = "10.1002/pc.26397" }
Perišić, S., Kareem Ali Alzaroug, A., Kalevski, K., Vuksanović, M. M., Volkov-Husović, T., Radović, I.,& Radojević, V.. (2022). Denture composite reinforced with short polyethylene terephthalate fibers. in Polymer Composites John Wiley and Sons Inc.., 43(1), 543-550. https://doi.org/10.1002/pc.26397
Perišić S, Kareem Ali Alzaroug A, Kalevski K, Vuksanović MM, Volkov-Husović T, Radović I, Radojević V. Denture composite reinforced with short polyethylene terephthalate fibers. in Polymer Composites. 2022;43(1):543-550. doi:10.1002/pc.26397 .
Perišić, Srđan, Kareem Ali Alzaroug, Azdihar, Kalevski, Katarina, Vuksanović, Marija M., Volkov-Husović, Tatjana, Radović, Ivana, Radojević, Vesna, "Denture composite reinforced with short polyethylene terephthalate fibers" in Polymer Composites, 43, no. 1 (2022):543-550, https://doi.org/10.1002/pc.26397 . .