Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants
Karakterizacija biokompatibilnih slojeva ZrO28%Y2O3 koji se koriste u kombinaciji sa drugom keramikom za modifikaciju površine implantata
Апстракт
The aim of this study was to deposit multi-functional ZrO28%Y2O3 coating layers using the plasma spray technology and then to characterise such layers. In combination with other biomedical ceramics, this coating is intended for the application in implant surface modification. The examination was focused on the mechanical properties and microstructure layers. Using the atmospheric plasma spraying, duplex ZrO28%Y2O3/Ni22Cr10Al1Y coating system was deposited on the X15Cr13 stainless steel, with two different thicknesses of the bond and ceramic coatings. The microstructure was analysed using an optical microscope, including the assessment of the content of micropores. The morphology of powder particles and ceramic coating surfaces were examined on a scanning electron microscope (SEM). The quality of the ZrO28%Y2O3 layers makes them suitable for the application and combination with other materials to create a system of biomedical or multifunctional coatings.
Cilj ovog rada bio je da se deponuju višenamenski slojevi prevlake ZrO28%Y2O3 primenom plazma
sprej tehnologije, a zatim da se karakterišu takvi slojevi. U kombinaciji sa drugom biomedicinskom
keramikom, ova prevlaka je namenjena primeni u modifikaciji površine implantata. spitivanje je
bilo usredsređeno na mehanička svojstva i mikrostrukturu slojeva. orišćenjem atmosferskog
plazma spreja, dupleks sistem prevlaka ZrO28%Y2O3 / Ni22Cr10Al1 nanet je na nerđajući čelik
X15Cr13, sa dve različite debljine vezne i keramičke prevlake. ikrostruktura je analizirana
pomoću optičkog mikroskopa, uključujući procenu sadr aja mikro pora. orfologija čestica praha i
površina keramičkih prevlaka ispitivane su na skening elektronskom mikroskopu (SE ). valitet
slojeva ZrO28%Y2O3 čini ih pogodnim za nanošenje i kombinaciju sa drugim materijalima kako bi
se stvorio sistem biomedicinskih ili multifunkcionalnih prevlaka.
Кључне речи:
Atmospheric plasma spray / Bond strength / Interface / Microhardness / Microstructure / Ni22Cr10Al1Y / ZrO28%Y2O3 / atmosferski plazma sprej / ZrO28%Y2O3 / Ni22Cr10Al1 / mikrostruktura / međupovršina / mikrotvrdoća / čvrstoća spojaИзвор:
Zaštita materijala, 2021, 62, 4, 262-268Издавач:
- Inženjersko društvo za koroziju
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200287 (Иновациони центар Технолошко-металуршког факултета у Београду доо) (RS-MESTD-inst-2020-200287)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200135 (Универзитет у Београду, Технолошко-металуршки факултет) (RS-MESTD-inst-2020-200135)
URI
http://aspace.agrif.bg.ac.rs/handle/123456789/6035http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5036
Колекције
Институција/група
Inovacioni centarTY - JOUR AU - Mrdak, Mihailo AU - Lačnjevac, Časlav AU - Rakin, Marko AU - Janaćković, Đorđe AU - Veljić, Darko AU - Bajić, Darko PY - 2021 UR - http://aspace.agrif.bg.ac.rs/handle/123456789/6035 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5036 AB - The aim of this study was to deposit multi-functional ZrO28%Y2O3 coating layers using the plasma spray technology and then to characterise such layers. In combination with other biomedical ceramics, this coating is intended for the application in implant surface modification. The examination was focused on the mechanical properties and microstructure layers. Using the atmospheric plasma spraying, duplex ZrO28%Y2O3/Ni22Cr10Al1Y coating system was deposited on the X15Cr13 stainless steel, with two different thicknesses of the bond and ceramic coatings. The microstructure was analysed using an optical microscope, including the assessment of the content of micropores. The morphology of powder particles and ceramic coating surfaces were examined on a scanning electron microscope (SEM). The quality of the ZrO28%Y2O3 layers makes them suitable for the application and combination with other materials to create a system of biomedical or multifunctional coatings. AB - Cilj ovog rada bio je da se deponuju višenamenski slojevi prevlake ZrO28%Y2O3 primenom plazma sprej tehnologije, a zatim da se karakterišu takvi slojevi. U kombinaciji sa drugom biomedicinskom keramikom, ova prevlaka je namenjena primeni u modifikaciji površine implantata. spitivanje je bilo usredsređeno na mehanička svojstva i mikrostrukturu slojeva. orišćenjem atmosferskog plazma spreja, dupleks sistem prevlaka ZrO28%Y2O3 / Ni22Cr10Al1 nanet je na nerđajući čelik X15Cr13, sa dve različite debljine vezne i keramičke prevlake. ikrostruktura je analizirana pomoću optičkog mikroskopa, uključujući procenu sadr aja mikro pora. orfologija čestica praha i površina keramičkih prevlaka ispitivane su na skening elektronskom mikroskopu (SE ). valitet slojeva ZrO28%Y2O3 čini ih pogodnim za nanošenje i kombinaciju sa drugim materijalima kako bi se stvorio sistem biomedicinskih ili multifunkcionalnih prevlaka. PB - Inženjersko društvo za koroziju T2 - Zaštita materijala T1 - Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants T1 - Karakterizacija biokompatibilnih slojeva ZrO28%Y2O3 koji se koriste u kombinaciji sa drugom keramikom za modifikaciju površine implantata EP - 268 IS - 4 SP - 262 VL - 62 DO - 10.5937/zasmat2104262M ER -
@article{ author = "Mrdak, Mihailo and Lačnjevac, Časlav and Rakin, Marko and Janaćković, Đorđe and Veljić, Darko and Bajić, Darko", year = "2021", abstract = "The aim of this study was to deposit multi-functional ZrO28%Y2O3 coating layers using the plasma spray technology and then to characterise such layers. In combination with other biomedical ceramics, this coating is intended for the application in implant surface modification. The examination was focused on the mechanical properties and microstructure layers. Using the atmospheric plasma spraying, duplex ZrO28%Y2O3/Ni22Cr10Al1Y coating system was deposited on the X15Cr13 stainless steel, with two different thicknesses of the bond and ceramic coatings. The microstructure was analysed using an optical microscope, including the assessment of the content of micropores. The morphology of powder particles and ceramic coating surfaces were examined on a scanning electron microscope (SEM). The quality of the ZrO28%Y2O3 layers makes them suitable for the application and combination with other materials to create a system of biomedical or multifunctional coatings., Cilj ovog rada bio je da se deponuju višenamenski slojevi prevlake ZrO28%Y2O3 primenom plazma sprej tehnologije, a zatim da se karakterišu takvi slojevi. U kombinaciji sa drugom biomedicinskom keramikom, ova prevlaka je namenjena primeni u modifikaciji površine implantata. spitivanje je bilo usredsređeno na mehanička svojstva i mikrostrukturu slojeva. orišćenjem atmosferskog plazma spreja, dupleks sistem prevlaka ZrO28%Y2O3 / Ni22Cr10Al1 nanet je na nerđajući čelik X15Cr13, sa dve različite debljine vezne i keramičke prevlake. ikrostruktura je analizirana pomoću optičkog mikroskopa, uključujući procenu sadr aja mikro pora. orfologija čestica praha i površina keramičkih prevlaka ispitivane su na skening elektronskom mikroskopu (SE ). valitet slojeva ZrO28%Y2O3 čini ih pogodnim za nanošenje i kombinaciju sa drugim materijalima kako bi se stvorio sistem biomedicinskih ili multifunkcionalnih prevlaka.", publisher = "Inženjersko društvo za koroziju", journal = "Zaštita materijala", title = "Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants, Karakterizacija biokompatibilnih slojeva ZrO28%Y2O3 koji se koriste u kombinaciji sa drugom keramikom za modifikaciju površine implantata", pages = "268-262", number = "4", volume = "62", doi = "10.5937/zasmat2104262M" }
Mrdak, M., Lačnjevac, Č., Rakin, M., Janaćković, Đ., Veljić, D.,& Bajić, D.. (2021). Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants. in Zaštita materijala Inženjersko društvo za koroziju., 62(4), 262-268. https://doi.org/10.5937/zasmat2104262M
Mrdak M, Lačnjevac Č, Rakin M, Janaćković Đ, Veljić D, Bajić D. Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants. in Zaštita materijala. 2021;62(4):262-268. doi:10.5937/zasmat2104262M .
Mrdak, Mihailo, Lačnjevac, Časlav, Rakin, Marko, Janaćković, Đorđe, Veljić, Darko, Bajić, Darko, "Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants" in Zaštita materijala, 62, no. 4 (2021):262-268, https://doi.org/10.5937/zasmat2104262M . .