Приказ основних података о документу

Karakterizacija biokompatibilnih slojeva ZrO28%Y2O3 koji se koriste u kombinaciji sa drugom keramikom za modifikaciju površine implantata

dc.creatorMrdak, Mihailo
dc.creatorLačnjevac, Časlav
dc.creatorRakin, Marko
dc.creatorJanaćković, Đorđe
dc.creatorVeljić, Darko
dc.creatorBajić, Darko
dc.date.accessioned2022-03-15T12:43:45Z
dc.date.available2022-03-15T12:43:45Z
dc.date.issued2021
dc.identifier.issn0351-9465
dc.identifier.urihttp://aspace.agrif.bg.ac.rs/handle/123456789/6035
dc.identifier.urihttp://TechnoRep.tmf.bg.ac.rs/handle/123456789/5036
dc.description.abstractThe aim of this study was to deposit multi-functional ZrO28%Y2O3 coating layers using the plasma spray technology and then to characterise such layers. In combination with other biomedical ceramics, this coating is intended for the application in implant surface modification. The examination was focused on the mechanical properties and microstructure layers. Using the atmospheric plasma spraying, duplex ZrO28%Y2O3/Ni22Cr10Al1Y coating system was deposited on the X15Cr13 stainless steel, with two different thicknesses of the bond and ceramic coatings. The microstructure was analysed using an optical microscope, including the assessment of the content of micropores. The morphology of powder particles and ceramic coating surfaces were examined on a scanning electron microscope (SEM). The quality of the ZrO28%Y2O3 layers makes them suitable for the application and combination with other materials to create a system of biomedical or multifunctional coatings.sr
dc.description.abstractCilj ovog rada bio je da se deponuju višenamenski slojevi prevlake ZrO28%Y2O3 primenom plazma sprej tehnologije, a zatim da se karakterišu takvi slojevi. U kombinaciji sa drugom biomedicinskom keramikom, ova prevlaka je namenjena primeni u modifikaciji površine implantata. spitivanje je bilo usredsređeno na mehanička svojstva i mikrostrukturu slojeva. orišćenjem atmosferskog plazma spreja, dupleks sistem prevlaka ZrO28%Y2O3 / Ni22Cr10Al1 nanet je na nerđajući čelik X15Cr13, sa dve različite debljine vezne i keramičke prevlake. ikrostruktura je analizirana pomoću optičkog mikroskopa, uključujući procenu sadr aja mikro pora. orfologija čestica praha i površina keramičkih prevlaka ispitivane su na skening elektronskom mikroskopu (SE ). valitet slojeva ZrO28%Y2O3 čini ih pogodnim za nanošenje i kombinaciju sa drugim materijalima kako bi se stvorio sistem biomedicinskih ili multifunkcionalnih prevlaka.
dc.language.isoensr
dc.publisherInženjersko društvo za korozijusr
dc.relationinfo:eu-repo/grantAgreement/MESTD/inst-2020/200287/RS//sr
dc.relationinfo:eu-repo/grantAgreement/MESTD/inst-2020/200135/RS//sr
dc.rightsopenAccesssr
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.sourceZaštita materijalasr
dc.subjectAtmospheric plasma spraysr
dc.subjectBond strengthsr
dc.subjectInterfacesr
dc.subjectMicrohardnesssr
dc.subjectMicrostructuresr
dc.subjectNi22Cr10Al1Ysr
dc.subjectZrO28%Y2O3sr
dc.subjectatmosferski plazma sprej
dc.subjectZrO28%Y2O3
dc.subjectNi22Cr10Al1
dc.subjectmikrostruktura
dc.subjectmeđupovršina
dc.subjectmikrotvrdoća
dc.subjectčvrstoća spoja
dc.titleCharacterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implantssr
dc.titleKarakterizacija biokompatibilnih slojeva ZrO28%Y2O3 koji se koriste u kombinaciji sa drugom keramikom za modifikaciju površine implantata
dc.typearticlesr
dc.rights.licenseBYsr
dc.citation.epage268
dc.citation.issue4
dc.citation.rankM51
dc.citation.spage262
dc.citation.volume62
dc.identifier.doi10.5937/zasmat2104262M
dc.identifier.fulltexthttp://TechnoRep.tmf.bg.ac.rs/bitstream/id/7440/Characterisation_of_biocompatible_pub_2022.pdf
dc.identifier.scopus2-s2.0-85123198327
dc.type.versionpublishedVersionsr


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу