Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens
Аутори
Trajković, IsaakMilošević, Miloš
Travica, Milan
Rakin, Marko
Mladenović, Goran
Kudrjavceva, Ljudmila
Međo, Bojan
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This paper presents a part of development of a non-standard method for testing of cylindrical test specimens for measurement of fracture properties of pipeline materials. This method for testing of cylindrical structures working under pressure is based on determining of fracture mechanics parameters on SENT (Single Edge Notched Tension) specimens and new PRNT (Pipe Ring Notched Tension) specimens. In this work, both types of specimens required for this testing were manufactured from polyamide PA12 by using SLS (selective laser sintering) additive manufacturing method. Testing of the specimens is performed on the universal device for testing of mechanical properties of materials Shimadzu, AGS-X 100 kN. The tensile testing is accompanied by GOM Aramis 2M system, used for digital image correlation. By using these two systems, test results are obtained for ring-shaped and SENT specimens, including forces, displacements and fracture mechanics parameters CMOD (Crack Mouth Opening Displacemen...t) and CTOD-δ5 (Crack Tip Opening Displacement obtained by δ5 technique), as well as crack growth. Repeatability of this process, along with valid result consistency, represent the basis for further development of the new method, including the determining of energy-based fracture mechanics parameters: J integral and stress intensity factor.
Кључне речи:
Digital image correlation – DIC / Fracture mechanics / Pipe ring notched tension specimens / Polyamide / Selective Laser SinteringИзвор:
Science of Sintering, 2022, 54, 3, 373-386Издавач:
- International Institute for the Science of Sintering (IISS)
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200135 (Универзитет у Београду, Технолошко-металуршки факултет) (RS-200135)
- Horizon 2020 research and innovation program (H2020-WIDESPREAD-2018, SIRAMM) under grant agreement No 857124.
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Trajković, Isaak AU - Milošević, Miloš AU - Travica, Milan AU - Rakin, Marko AU - Mladenović, Goran AU - Kudrjavceva, Ljudmila AU - Međo, Bojan PY - 2022 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5348 AB - This paper presents a part of development of a non-standard method for testing of cylindrical test specimens for measurement of fracture properties of pipeline materials. This method for testing of cylindrical structures working under pressure is based on determining of fracture mechanics parameters on SENT (Single Edge Notched Tension) specimens and new PRNT (Pipe Ring Notched Tension) specimens. In this work, both types of specimens required for this testing were manufactured from polyamide PA12 by using SLS (selective laser sintering) additive manufacturing method. Testing of the specimens is performed on the universal device for testing of mechanical properties of materials Shimadzu, AGS-X 100 kN. The tensile testing is accompanied by GOM Aramis 2M system, used for digital image correlation. By using these two systems, test results are obtained for ring-shaped and SENT specimens, including forces, displacements and fracture mechanics parameters CMOD (Crack Mouth Opening Displacement) and CTOD-δ5 (Crack Tip Opening Displacement obtained by δ5 technique), as well as crack growth. Repeatability of this process, along with valid result consistency, represent the basis for further development of the new method, including the determining of energy-based fracture mechanics parameters: J integral and stress intensity factor. PB - International Institute for the Science of Sintering (IISS) T2 - Science of Sintering T1 - Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens EP - 386 IS - 3 SP - 373 VL - 54 DO - 10.2298/SOS2203373T ER -
@article{ author = "Trajković, Isaak and Milošević, Miloš and Travica, Milan and Rakin, Marko and Mladenović, Goran and Kudrjavceva, Ljudmila and Međo, Bojan", year = "2022", abstract = "This paper presents a part of development of a non-standard method for testing of cylindrical test specimens for measurement of fracture properties of pipeline materials. This method for testing of cylindrical structures working under pressure is based on determining of fracture mechanics parameters on SENT (Single Edge Notched Tension) specimens and new PRNT (Pipe Ring Notched Tension) specimens. In this work, both types of specimens required for this testing were manufactured from polyamide PA12 by using SLS (selective laser sintering) additive manufacturing method. Testing of the specimens is performed on the universal device for testing of mechanical properties of materials Shimadzu, AGS-X 100 kN. The tensile testing is accompanied by GOM Aramis 2M system, used for digital image correlation. By using these two systems, test results are obtained for ring-shaped and SENT specimens, including forces, displacements and fracture mechanics parameters CMOD (Crack Mouth Opening Displacement) and CTOD-δ5 (Crack Tip Opening Displacement obtained by δ5 technique), as well as crack growth. Repeatability of this process, along with valid result consistency, represent the basis for further development of the new method, including the determining of energy-based fracture mechanics parameters: J integral and stress intensity factor.", publisher = "International Institute for the Science of Sintering (IISS)", journal = "Science of Sintering", title = "Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens", pages = "386-373", number = "3", volume = "54", doi = "10.2298/SOS2203373T" }
Trajković, I., Milošević, M., Travica, M., Rakin, M., Mladenović, G., Kudrjavceva, L.,& Međo, B.. (2022). Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens. in Science of Sintering International Institute for the Science of Sintering (IISS)., 54(3), 373-386. https://doi.org/10.2298/SOS2203373T
Trajković I, Milošević M, Travica M, Rakin M, Mladenović G, Kudrjavceva L, Međo B. Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens. in Science of Sintering. 2022;54(3):373-386. doi:10.2298/SOS2203373T .
Trajković, Isaak, Milošević, Miloš, Travica, Milan, Rakin, Marko, Mladenović, Goran, Kudrjavceva, Ljudmila, Međo, Bojan, "Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens" in Science of Sintering, 54, no. 3 (2022):373-386, https://doi.org/10.2298/SOS2203373T . .