Приказ основних података о документу

dc.creatorNikolić, Nebojša D.
dc.creatorPopov, Konstantin I.
dc.creatorPavlovic, Ljubica.J.
dc.creatorPavlović, Miomir
dc.date.accessioned2019-01-30T17:16:44Z
dc.date.accessioned2023-01-18T12:38:39Z
dc.date.available2019-01-30T17:16:44Z
dc.date.available2023-01-18T12:38:39Z
dc.date.issued2007
dc.identifier.issn1424-3210
dc.identifier.urihttp://TechnoRep.tmf.bg.ac.rs/handle/123456789/5485
dc.description.abstractElectrodeposition of copper from acid sulfate solutions at overpotentials on the plateau of the limiting diffusion current density and at higher overpotentials was examined. The average current efficiencies for hydrogen evolution reaction are determined by a measurement of the quantity of evolved hydrogen and the overall electrodeposition current as a function of electrodeposition time, while morphologies of copper deposits are examined by the use of the scanning electron microscopy (SEM) technique. It is found that the open and porous structures of copper deposits (denoted and as honeycomb - like copper structures), suitable for electrodes in electrochemical devices such as fuel cells and chemical sensors, were reached by electrodeposition processes from solutions with the lower concentrations of Cu (II) ions (0.15 M CuSO 4 and less in 0.50 M H2SO4) at overpotentials outside the plateau of the limiting diffusion current density at which the quantity of evolved hydrogen was enough to change hydrodynamic conditions in the near - electrode layer. The main characteristics of these copper structures were craters or holes formed primarily due to the attachment hydrogen bubbles with agglomerates of copper grains between them.en
dc.publisherMDPI
dc.relationinfo:eu-repo/grantAgreement/MESTD/MPN2006-2010/142032/RS//
dc.rightsopenAccess
dc.sourceSensors
dc.subjectCopperen
dc.subjectElectrodepositionen
dc.subjectHydrogen evolutionen
dc.subjectScanning electron microscope (SEM)en
dc.subjectSensorsen
dc.titleDetermination of critical conditions for the formation of electrodeposited copper structures suitable for electrodes in electrochemical devicesen
dc.typearticle
dc.rights.licenseARR
dc.citation.epage15
dc.citation.issue1
dc.citation.other7(1): 1-15
dc.citation.spage1
dc.citation.volume7
dc.identifier.doi10.3390/s7010001
dc.identifier.fulltexthttp://TechnoRep.tmf.bg.ac.rs/bitstream/id/14298/368.pdf
dc.identifier.scopus2-s2.0-33947408137
dc.identifier.wos000244634400001
dc.type.versionpublishedVersion


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу