Review: The approaches for estimation of limit of detection for ICP-MS trace analysis of arsenic
Samo za registrovane korisnike
2012
Autori
Rajaković, Ljubinka V.Markovic, Dana D.
Rajaković-Ognjanović, Vladana N.
Antanasijević, Davor Z.
Članak u časopisu (Objavljena verzija)

Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The analytical properties of an analytical method must be evaluated through validation protocols. Beside specificity and/or selectivity, linearity of calibration, repeatability and accuracy, the most important parameters are: LOD (limit of detection) and LOQ (limit of quantification). Through these limits, it is possible to define the smallest concentration of analyte that can be reliably detected and quantified. To establish these limits, an analyst should apply several estimation methods and test a large number of sample replicates. It is difficult to make a compromise between complex statistical programs and the simple analytical demand to have reliable analytical parameters. The differences and equivalency of estimation methods and approaches for analytical limits could be overcome by an experimental comparison. In this paper, the focus is the LOD of inductively coupled plasma-mass spectrometry (ICP-MS) measurements employed for the determination of arsenic. The current approaches ...for the calculation of the LOD are summarized and critically discussed. (C) 2012 Elsevier B.V. All rights reserved.
Ključne reči:
Limit of detection / Estimation approaches / Arsenic / ICP-MSIzvor:
Talanta, 2012, 102, SI, 79-87Finansiranje / projekti:
- Nove tehnologije za monitoring i zaštitu životnog okruženja od štetnih hemijskih supstanci i radijacionog opterećenja (RS-43009)
- Razvoj i primena metoda i materijala za monitoring novih zagađujućih i toksičnih organskih materija i teških metala (RS-172007)
- Sistemi za odvođenje kišnih voda kao deo urbane i saobraćajne infrastrukture (RS-37010)
DOI: 10.1016/j.talanta.2012.08.016
ISSN: 0039-9140
PubMed: 23182578
WoS: 000312692000012
Scopus: 2-s2.0-84870254856
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Rajaković, Ljubinka V. AU - Markovic, Dana D. AU - Rajaković-Ognjanović, Vladana N. AU - Antanasijević, Davor Z. PY - 2012 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5737 AB - The analytical properties of an analytical method must be evaluated through validation protocols. Beside specificity and/or selectivity, linearity of calibration, repeatability and accuracy, the most important parameters are: LOD (limit of detection) and LOQ (limit of quantification). Through these limits, it is possible to define the smallest concentration of analyte that can be reliably detected and quantified. To establish these limits, an analyst should apply several estimation methods and test a large number of sample replicates. It is difficult to make a compromise between complex statistical programs and the simple analytical demand to have reliable analytical parameters. The differences and equivalency of estimation methods and approaches for analytical limits could be overcome by an experimental comparison. In this paper, the focus is the LOD of inductively coupled plasma-mass spectrometry (ICP-MS) measurements employed for the determination of arsenic. The current approaches for the calculation of the LOD are summarized and critically discussed. (C) 2012 Elsevier B.V. All rights reserved. T2 - Talanta T1 - Review: The approaches for estimation of limit of detection for ICP-MS trace analysis of arsenic EP - 87 IS - SI SP - 79 VL - 102 DO - 10.1016/j.talanta.2012.08.016 ER -
@article{ author = "Rajaković, Ljubinka V. and Markovic, Dana D. and Rajaković-Ognjanović, Vladana N. and Antanasijević, Davor Z.", year = "2012", abstract = "The analytical properties of an analytical method must be evaluated through validation protocols. Beside specificity and/or selectivity, linearity of calibration, repeatability and accuracy, the most important parameters are: LOD (limit of detection) and LOQ (limit of quantification). Through these limits, it is possible to define the smallest concentration of analyte that can be reliably detected and quantified. To establish these limits, an analyst should apply several estimation methods and test a large number of sample replicates. It is difficult to make a compromise between complex statistical programs and the simple analytical demand to have reliable analytical parameters. The differences and equivalency of estimation methods and approaches for analytical limits could be overcome by an experimental comparison. In this paper, the focus is the LOD of inductively coupled plasma-mass spectrometry (ICP-MS) measurements employed for the determination of arsenic. The current approaches for the calculation of the LOD are summarized and critically discussed. (C) 2012 Elsevier B.V. All rights reserved.", journal = "Talanta", title = "Review: The approaches for estimation of limit of detection for ICP-MS trace analysis of arsenic", pages = "87-79", number = "SI", volume = "102", doi = "10.1016/j.talanta.2012.08.016" }
Rajaković, L. V., Markovic, D. D., Rajaković-Ognjanović, V. N.,& Antanasijević, D. Z.. (2012). Review: The approaches for estimation of limit of detection for ICP-MS trace analysis of arsenic. in Talanta, 102(SI), 79-87. https://doi.org/10.1016/j.talanta.2012.08.016
Rajaković LV, Markovic DD, Rajaković-Ognjanović VN, Antanasijević DZ. Review: The approaches for estimation of limit of detection for ICP-MS trace analysis of arsenic. in Talanta. 2012;102(SI):79-87. doi:10.1016/j.talanta.2012.08.016 .
Rajaković, Ljubinka V., Markovic, Dana D., Rajaković-Ognjanović, Vladana N., Antanasijević, Davor Z., "Review: The approaches for estimation of limit of detection for ICP-MS trace analysis of arsenic" in Talanta, 102, no. SI (2012):79-87, https://doi.org/10.1016/j.talanta.2012.08.016 . .