Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors
Authorized Users Only
2015
Authors
Zdravković, JelenaSimović, Bojana
Golubović, Aleksandar
Poleti, Dejan

Veljković, Ivana
Šćepanović, Maja
Branković, Goran

Article (Published version)

Metadata
Show full item recordAbstract
The effects of common precursors used in the synthesis of CeO2 nanopowders were investigated, and the structural and spectral properties of the resulting products were compared. Two cerium (III) salts, i.e., Ce(NO3)(3)center dot 6H(2)O and CeCl3 center dot 7H(2)O, and two cerium (IV) salts, i.e., Ce (SO4)(2)center dot 4H(2)O and (NH4)(2)Ce(NO3)(6) were applied. The proposed procedures for the CeO2 preparations were realizdd using the same hydrothermal treatment conditions. The products were characterized using X-ray powder diffraction (XRD) and thermogravimetric (TG) analysis, and the morphology was determined using scanning (SEM) and transmission electron microscopy (TEM). The spectral properties of the obtained nanopowders were characterized by FT-IR, Raman scattering and UV-vis spectroscopy. The results revealed the influence of the precursors on the crystallinity, crystallite size, band gap energy, morphology and purity of the synthesized samples.
Keywords:
Spectroscopy / Powders: chemical preparation / Optical properties / CeO2Source:
Ceramics International, 2015, 41, 2, 1970-1979Publisher:
- Elsevier Sci Ltd, Oxford
Funding / projects:
- SASA project [F-134]
- Zero- to Three-Dimensional Nanostructures for Application in Electronics and Renewable Energy Sources: Synthesis, Characterization and Processing (RS-45007)
- Nanostructured multifunctional materials and nanocomposites (RS-45018)
- Physics of nanostructured oxide materials and strongly correlated systems (RS-171032)
DOI: 10.1016/j.ceramint.2014.08.122
ISSN: 0272-8842
WoS: 000348961400007
Scopus: 2-s2.0-84919427558
Collections
Institution/Community
Inovacioni centarTY - JOUR AU - Zdravković, Jelena AU - Simović, Bojana AU - Golubović, Aleksandar AU - Poleti, Dejan AU - Veljković, Ivana AU - Šćepanović, Maja AU - Branković, Goran PY - 2015 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5754 AB - The effects of common precursors used in the synthesis of CeO2 nanopowders were investigated, and the structural and spectral properties of the resulting products were compared. Two cerium (III) salts, i.e., Ce(NO3)(3)center dot 6H(2)O and CeCl3 center dot 7H(2)O, and two cerium (IV) salts, i.e., Ce (SO4)(2)center dot 4H(2)O and (NH4)(2)Ce(NO3)(6) were applied. The proposed procedures for the CeO2 preparations were realizdd using the same hydrothermal treatment conditions. The products were characterized using X-ray powder diffraction (XRD) and thermogravimetric (TG) analysis, and the morphology was determined using scanning (SEM) and transmission electron microscopy (TEM). The spectral properties of the obtained nanopowders were characterized by FT-IR, Raman scattering and UV-vis spectroscopy. The results revealed the influence of the precursors on the crystallinity, crystallite size, band gap energy, morphology and purity of the synthesized samples. PB - Elsevier Sci Ltd, Oxford T2 - Ceramics International T1 - Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors EP - 1979 IS - 2 SP - 1970 VL - 41 DO - 10.1016/j.ceramint.2014.08.122 ER -
@article{ author = "Zdravković, Jelena and Simović, Bojana and Golubović, Aleksandar and Poleti, Dejan and Veljković, Ivana and Šćepanović, Maja and Branković, Goran", year = "2015", abstract = "The effects of common precursors used in the synthesis of CeO2 nanopowders were investigated, and the structural and spectral properties of the resulting products were compared. Two cerium (III) salts, i.e., Ce(NO3)(3)center dot 6H(2)O and CeCl3 center dot 7H(2)O, and two cerium (IV) salts, i.e., Ce (SO4)(2)center dot 4H(2)O and (NH4)(2)Ce(NO3)(6) were applied. The proposed procedures for the CeO2 preparations were realizdd using the same hydrothermal treatment conditions. The products were characterized using X-ray powder diffraction (XRD) and thermogravimetric (TG) analysis, and the morphology was determined using scanning (SEM) and transmission electron microscopy (TEM). The spectral properties of the obtained nanopowders were characterized by FT-IR, Raman scattering and UV-vis spectroscopy. The results revealed the influence of the precursors on the crystallinity, crystallite size, band gap energy, morphology and purity of the synthesized samples.", publisher = "Elsevier Sci Ltd, Oxford", journal = "Ceramics International", title = "Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors", pages = "1979-1970", number = "2", volume = "41", doi = "10.1016/j.ceramint.2014.08.122" }
Zdravković, J., Simović, B., Golubović, A., Poleti, D., Veljković, I., Šćepanović, M.,& Branković, G.. (2015). Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors. in Ceramics International Elsevier Sci Ltd, Oxford., 41(2), 1970-1979. https://doi.org/10.1016/j.ceramint.2014.08.122
Zdravković J, Simović B, Golubović A, Poleti D, Veljković I, Šćepanović M, Branković G. Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors. in Ceramics International. 2015;41(2):1970-1979. doi:10.1016/j.ceramint.2014.08.122 .
Zdravković, Jelena, Simović, Bojana, Golubović, Aleksandar, Poleti, Dejan, Veljković, Ivana, Šćepanović, Maja, Branković, Goran, "Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors" in Ceramics International, 41, no. 2 (2015):1970-1979, https://doi.org/10.1016/j.ceramint.2014.08.122 . .