Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors
Само за регистроване кориснике
2015
Аутори
Vuković, MarinaBranković, Goran

Marinković-Stanojević, Zorica
Poleti, Dejan

Branković, Zorica
Чланак у часопису (Објављена верзија)

Метаподаци
Приказ свих података о документуАпстракт
Previously synthesized nanocrystalline ZnO doped with cobalt and manganese, Bi2O3 and Sb2O3 were the precursors for high voltage varistors preparation. Varistor ceramics were sintered at 750 degrees C, 770 degrees C or 900 degrees C for 1 h. An amount of 30 mass% of secondary phases and sintering temperature of 770 degrees C were found to be optimal for obtaining varistor with prominent properties. Achieved density was 97% of the theoretical value. Post-sintering phase composition included ZnO, gamma-Bi2O3 and pyrochlore-type with Zn2Bi3Sb3O14 nominal formula. Fine grained microstructure was accompanied with good phase distribution and excellent electrical characteristics: extraordinary high breakdown field of 3200 V mm(-1), high nonlinearity coefficients of 71 and 51 in 0.1-1 and 1-10 mA cm(-2) current density ranges, respectively, and low leakage current of 7.7 mu A cm(-2).
Кључне речи:
Uniform microstructure / Submicronic grain size / Nanoprecursors / High voltage ZnO varistors / Electrical characteristicsИзвор:
Journal of the European Ceramic Society, 2015, 35, 6, 1807-1814Издавач:
- Elsevier Sci Ltd, Oxford
Финансирање / пројекти:
DOI: 10.1016/j.jeurceramsoc.2014.12.015
ISSN: 0955-2219
WoS: 000350191900014
Scopus: 2-s2.0-84922203804
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Vuković, Marina AU - Branković, Goran AU - Marinković-Stanojević, Zorica AU - Poleti, Dejan AU - Branković, Zorica PY - 2015 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5808 AB - Previously synthesized nanocrystalline ZnO doped with cobalt and manganese, Bi2O3 and Sb2O3 were the precursors for high voltage varistors preparation. Varistor ceramics were sintered at 750 degrees C, 770 degrees C or 900 degrees C for 1 h. An amount of 30 mass% of secondary phases and sintering temperature of 770 degrees C were found to be optimal for obtaining varistor with prominent properties. Achieved density was 97% of the theoretical value. Post-sintering phase composition included ZnO, gamma-Bi2O3 and pyrochlore-type with Zn2Bi3Sb3O14 nominal formula. Fine grained microstructure was accompanied with good phase distribution and excellent electrical characteristics: extraordinary high breakdown field of 3200 V mm(-1), high nonlinearity coefficients of 71 and 51 in 0.1-1 and 1-10 mA cm(-2) current density ranges, respectively, and low leakage current of 7.7 mu A cm(-2). PB - Elsevier Sci Ltd, Oxford T2 - Journal of the European Ceramic Society T1 - Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors EP - 1814 IS - 6 SP - 1807 VL - 35 DO - 10.1016/j.jeurceramsoc.2014.12.015 ER -
@article{ author = "Vuković, Marina and Branković, Goran and Marinković-Stanojević, Zorica and Poleti, Dejan and Branković, Zorica", year = "2015", abstract = "Previously synthesized nanocrystalline ZnO doped with cobalt and manganese, Bi2O3 and Sb2O3 were the precursors for high voltage varistors preparation. Varistor ceramics were sintered at 750 degrees C, 770 degrees C or 900 degrees C for 1 h. An amount of 30 mass% of secondary phases and sintering temperature of 770 degrees C were found to be optimal for obtaining varistor with prominent properties. Achieved density was 97% of the theoretical value. Post-sintering phase composition included ZnO, gamma-Bi2O3 and pyrochlore-type with Zn2Bi3Sb3O14 nominal formula. Fine grained microstructure was accompanied with good phase distribution and excellent electrical characteristics: extraordinary high breakdown field of 3200 V mm(-1), high nonlinearity coefficients of 71 and 51 in 0.1-1 and 1-10 mA cm(-2) current density ranges, respectively, and low leakage current of 7.7 mu A cm(-2).", publisher = "Elsevier Sci Ltd, Oxford", journal = "Journal of the European Ceramic Society", title = "Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors", pages = "1814-1807", number = "6", volume = "35", doi = "10.1016/j.jeurceramsoc.2014.12.015" }
Vuković, M., Branković, G., Marinković-Stanojević, Z., Poleti, D.,& Branković, Z.. (2015). Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors. in Journal of the European Ceramic Society Elsevier Sci Ltd, Oxford., 35(6), 1807-1814. https://doi.org/10.1016/j.jeurceramsoc.2014.12.015
Vuković M, Branković G, Marinković-Stanojević Z, Poleti D, Branković Z. Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors. in Journal of the European Ceramic Society. 2015;35(6):1807-1814. doi:10.1016/j.jeurceramsoc.2014.12.015 .
Vuković, Marina, Branković, Goran, Marinković-Stanojević, Zorica, Poleti, Dejan, Branković, Zorica, "Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors" in Journal of the European Ceramic Society, 35, no. 6 (2015):1807-1814, https://doi.org/10.1016/j.jeurceramsoc.2014.12.015 . .