Microstructure, hardness and fracture resistance of P235TR1 seam steel pipes of different diameters
Otpornost prema lomu, tvrdoća i mikrostruktura šavnih cevi različitog prečnika izrađenih od čelika P235TR1
Authors
Musrati, WalidMeđo, Bojan

Cvijović-Alagić, Ivana
Gubeljak, Nenad
Štefane, Primož
Radosavljević, Zoran
Rakin, Marko

Article (Published version)
Metadata
Show full item recordAbstract
Steel pipelines in industrial plants consist of different elements, including seamless and/or welded (seam) pipes. Properties of welded pipes, including their fracture behaviour, depend on the characteristics of both, the base metal, and the weld metal. In this work, two seam pipes are considered having different diameters and manufactured of P235TR1 steel. Hardness and microstructure were examined on the samples which contained the seam zone, to capture the influence of heterogeneity. Fracture resistance of the pipeline material, i.e. of both base metals and both seams, was determined by experimental examination of the recently proposed Pipe ring notch bending specimens with sharp stress concentrators. Differences between the two tested pipes, including the influence of the heterogeneity caused by the welded joint, were determined by comparison of the crack growth resistance curves. Effects of the initial stress concentrator shape, sharp machined notch or fatigue precrack are discusse...d.
Čelični cevovodi u industrijskim postrojenjima se sastoje od različitih elemenata, uključujući bešavne i/ili
zavarene (šavne) cevi. Osobine šavnih cevi, uključujući ponašanje materijala cevi pri lomu, zavise i od
osnovnog metala i od metala šava. U ovom radu razmatrane su dve šavne cevi različitih prečnika,
izrađene od čelika P235TR1. Tvrdoća i mikrostruktura su analizirane na uzorcima isečenim iz cevi u zoni
šava, da bi se odredio uticaj heterogenosti. Otpornost prema lomu materijala cevovoda, tj. oba osnovna
metala i oba šava, je određena na osnovu ispitivanja epruveta oblika prstena sa oštrim koncentratorima
napona, predloženih u prethodnim studijama. Poređenjem krivih otpornosti prema rastu prsline
određene su razlike između dve ispitivane cevi, kao i uticaj heterogenosti izazvan postojanjem zavarenog
spoja. Razmotren je uticaj oblika početnog koncentratora napona, oštrog žleba odnosno zamorne
početne prsline.
Keywords:
fracture mechanics / microstructural analysis / non-standard specimens / pipe ring testing / welded joint hardness / ispitivanje epruveta oblika prstena / mikrostrukturna analiza / tvrdoća zavarenog spoja / mehanika loma / nestandardne epruveteSource:
Hemijska industrija, 2023, 77, 2, 155-165Publisher:
- Association of the Chemical Engineers of Serbia
Funding / projects:
Institution/Community
Tehnološko-metalurški fakultetTY - JOUR AU - Musrati, Walid AU - Međo, Bojan AU - Cvijović-Alagić, Ivana AU - Gubeljak, Nenad AU - Štefane, Primož AU - Radosavljević, Zoran AU - Rakin, Marko PY - 2023 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6607 AB - Steel pipelines in industrial plants consist of different elements, including seamless and/or welded (seam) pipes. Properties of welded pipes, including their fracture behaviour, depend on the characteristics of both, the base metal, and the weld metal. In this work, two seam pipes are considered having different diameters and manufactured of P235TR1 steel. Hardness and microstructure were examined on the samples which contained the seam zone, to capture the influence of heterogeneity. Fracture resistance of the pipeline material, i.e. of both base metals and both seams, was determined by experimental examination of the recently proposed Pipe ring notch bending specimens with sharp stress concentrators. Differences between the two tested pipes, including the influence of the heterogeneity caused by the welded joint, were determined by comparison of the crack growth resistance curves. Effects of the initial stress concentrator shape, sharp machined notch or fatigue precrack are discussed. AB - Čelični cevovodi u industrijskim postrojenjima se sastoje od različitih elemenata, uključujući bešavne i/ili zavarene (šavne) cevi. Osobine šavnih cevi, uključujući ponašanje materijala cevi pri lomu, zavise i od osnovnog metala i od metala šava. U ovom radu razmatrane su dve šavne cevi različitih prečnika, izrađene od čelika P235TR1. Tvrdoća i mikrostruktura su analizirane na uzorcima isečenim iz cevi u zoni šava, da bi se odredio uticaj heterogenosti. Otpornost prema lomu materijala cevovoda, tj. oba osnovna metala i oba šava, je određena na osnovu ispitivanja epruveta oblika prstena sa oštrim koncentratorima napona, predloženih u prethodnim studijama. Poređenjem krivih otpornosti prema rastu prsline određene su razlike između dve ispitivane cevi, kao i uticaj heterogenosti izazvan postojanjem zavarenog spoja. Razmotren je uticaj oblika početnog koncentratora napona, oštrog žleba odnosno zamorne početne prsline. PB - Association of the Chemical Engineers of Serbia T2 - Hemijska industrija T1 - Microstructure, hardness and fracture resistance of P235TR1 seam steel pipes of different diameters T1 - Otpornost prema lomu, tvrdoća i mikrostruktura šavnih cevi različitog prečnika izrađenih od čelika P235TR1 EP - 165 IS - 2 SP - 155 VL - 77 DO - 10.2298/HEMIND230222016M ER -
@article{ author = "Musrati, Walid and Međo, Bojan and Cvijović-Alagić, Ivana and Gubeljak, Nenad and Štefane, Primož and Radosavljević, Zoran and Rakin, Marko", year = "2023", abstract = "Steel pipelines in industrial plants consist of different elements, including seamless and/or welded (seam) pipes. Properties of welded pipes, including their fracture behaviour, depend on the characteristics of both, the base metal, and the weld metal. In this work, two seam pipes are considered having different diameters and manufactured of P235TR1 steel. Hardness and microstructure were examined on the samples which contained the seam zone, to capture the influence of heterogeneity. Fracture resistance of the pipeline material, i.e. of both base metals and both seams, was determined by experimental examination of the recently proposed Pipe ring notch bending specimens with sharp stress concentrators. Differences between the two tested pipes, including the influence of the heterogeneity caused by the welded joint, were determined by comparison of the crack growth resistance curves. Effects of the initial stress concentrator shape, sharp machined notch or fatigue precrack are discussed., Čelični cevovodi u industrijskim postrojenjima se sastoje od različitih elemenata, uključujući bešavne i/ili zavarene (šavne) cevi. Osobine šavnih cevi, uključujući ponašanje materijala cevi pri lomu, zavise i od osnovnog metala i od metala šava. U ovom radu razmatrane su dve šavne cevi različitih prečnika, izrađene od čelika P235TR1. Tvrdoća i mikrostruktura su analizirane na uzorcima isečenim iz cevi u zoni šava, da bi se odredio uticaj heterogenosti. Otpornost prema lomu materijala cevovoda, tj. oba osnovna metala i oba šava, je određena na osnovu ispitivanja epruveta oblika prstena sa oštrim koncentratorima napona, predloženih u prethodnim studijama. Poređenjem krivih otpornosti prema rastu prsline određene su razlike između dve ispitivane cevi, kao i uticaj heterogenosti izazvan postojanjem zavarenog spoja. Razmotren je uticaj oblika početnog koncentratora napona, oštrog žleba odnosno zamorne početne prsline.", publisher = "Association of the Chemical Engineers of Serbia", journal = "Hemijska industrija", title = "Microstructure, hardness and fracture resistance of P235TR1 seam steel pipes of different diameters, Otpornost prema lomu, tvrdoća i mikrostruktura šavnih cevi različitog prečnika izrađenih od čelika P235TR1", pages = "165-155", number = "2", volume = "77", doi = "10.2298/HEMIND230222016M" }
Musrati, W., Međo, B., Cvijović-Alagić, I., Gubeljak, N., Štefane, P., Radosavljević, Z.,& Rakin, M.. (2023). Microstructure, hardness and fracture resistance of P235TR1 seam steel pipes of different diameters. in Hemijska industrija Association of the Chemical Engineers of Serbia., 77(2), 155-165. https://doi.org/10.2298/HEMIND230222016M
Musrati W, Međo B, Cvijović-Alagić I, Gubeljak N, Štefane P, Radosavljević Z, Rakin M. Microstructure, hardness and fracture resistance of P235TR1 seam steel pipes of different diameters. in Hemijska industrija. 2023;77(2):155-165. doi:10.2298/HEMIND230222016M .
Musrati, Walid, Međo, Bojan, Cvijović-Alagić, Ivana, Gubeljak, Nenad, Štefane, Primož, Radosavljević, Zoran, Rakin, Marko, "Microstructure, hardness and fracture resistance of P235TR1 seam steel pipes of different diameters" in Hemijska industrija, 77, no. 2 (2023):155-165, https://doi.org/10.2298/HEMIND230222016M . .