The influence of polycaprolactone content on the surface properties of polyurethane networks
Само за регистроване кориснике
2024
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The aim of this work was to examine the influence of polycaprolactone (PCL) as a soft segment (SS) on the surface properties of polyurethane networks (PUNs). Five PUNs with different SS content (from 10 to 50 wt%) were prepared using Boltorn® aliphatic hyperbranched polyester of the second pseudo generation and isophorone diisocyanate as components of hard segments. The structure, hydrophobicity, wettability, and swelling behavior of these PUNs were investigated. Primarily, the obtained results showed that properties of prepared PUNs strongly depend on the content of SS that is, PCL. It has been established that the increase of SS content reduced the degree of hydrogen bonding in PUNs. Also, the increase of the SS content in PUNs induced appearance of more pronounced microphase separated morphology, better hydrophobicity and non-wetting with diiodomethane. Simultaneously, the increase of the SS content led to the decrease of contact angles with formamide, and surface free energy of the... prepared PUNs. These PUNs show good surface properties that are required for their potential application such as coatings.
Кључне речи:
microphase separation / polycaprolactone / polyurethane networks / surface free energy / surface properties / swelling behaviorИзвор:
Journal of Applied Polymer Science, 02-2024, 141, 8, e54989-Издавач:
- John Wiley and Sons Inc.
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200026 (Универзитет у Београду, Институт за хемију, технологију и металургију - ИХТМ) (RS-MESTD-inst-2020-200026)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200135 (Универзитет у Београду, Технолошко-металуршки факултет) (RS-MESTD-inst-2020-200135)
DOI: 10.1002/app.54989
ISSN: 0021-8995
WoS: 001112199100001
Scopus: 2-s2.0-85178402282
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Stefanović, Ivan S. AU - Džunuzović, Jasna V. AU - Džunuzović, Enis S. AU - Ranđelović, Danijela V. PY - 2024-02 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6993 AB - The aim of this work was to examine the influence of polycaprolactone (PCL) as a soft segment (SS) on the surface properties of polyurethane networks (PUNs). Five PUNs with different SS content (from 10 to 50 wt%) were prepared using Boltorn® aliphatic hyperbranched polyester of the second pseudo generation and isophorone diisocyanate as components of hard segments. The structure, hydrophobicity, wettability, and swelling behavior of these PUNs were investigated. Primarily, the obtained results showed that properties of prepared PUNs strongly depend on the content of SS that is, PCL. It has been established that the increase of SS content reduced the degree of hydrogen bonding in PUNs. Also, the increase of the SS content in PUNs induced appearance of more pronounced microphase separated morphology, better hydrophobicity and non-wetting with diiodomethane. Simultaneously, the increase of the SS content led to the decrease of contact angles with formamide, and surface free energy of the prepared PUNs. These PUNs show good surface properties that are required for their potential application such as coatings. PB - John Wiley and Sons Inc. T2 - Journal of Applied Polymer Science T1 - The influence of polycaprolactone content on the surface properties of polyurethane networks IS - 8 SP - e54989 VL - 141 DO - 10.1002/app.54989 ER -
@article{ author = "Stefanović, Ivan S. and Džunuzović, Jasna V. and Džunuzović, Enis S. and Ranđelović, Danijela V.", year = "2024-02", abstract = "The aim of this work was to examine the influence of polycaprolactone (PCL) as a soft segment (SS) on the surface properties of polyurethane networks (PUNs). Five PUNs with different SS content (from 10 to 50 wt%) were prepared using Boltorn® aliphatic hyperbranched polyester of the second pseudo generation and isophorone diisocyanate as components of hard segments. The structure, hydrophobicity, wettability, and swelling behavior of these PUNs were investigated. Primarily, the obtained results showed that properties of prepared PUNs strongly depend on the content of SS that is, PCL. It has been established that the increase of SS content reduced the degree of hydrogen bonding in PUNs. Also, the increase of the SS content in PUNs induced appearance of more pronounced microphase separated morphology, better hydrophobicity and non-wetting with diiodomethane. Simultaneously, the increase of the SS content led to the decrease of contact angles with formamide, and surface free energy of the prepared PUNs. These PUNs show good surface properties that are required for their potential application such as coatings.", publisher = "John Wiley and Sons Inc.", journal = "Journal of Applied Polymer Science", title = "The influence of polycaprolactone content on the surface properties of polyurethane networks", number = "8", pages = "e54989", volume = "141", doi = "10.1002/app.54989" }
Stefanović, I. S., Džunuzović, J. V., Džunuzović, E. S.,& Ranđelović, D. V.. (2024-02). The influence of polycaprolactone content on the surface properties of polyurethane networks. in Journal of Applied Polymer Science John Wiley and Sons Inc.., 141(8), e54989. https://doi.org/10.1002/app.54989
Stefanović IS, Džunuzović JV, Džunuzović ES, Ranđelović DV. The influence of polycaprolactone content on the surface properties of polyurethane networks. in Journal of Applied Polymer Science. 2024;141(8):e54989. doi:10.1002/app.54989 .
Stefanović, Ivan S., Džunuzović, Jasna V., Džunuzović, Enis S., Ranđelović, Danijela V., "The influence of polycaprolactone content on the surface properties of polyurethane networks" in Journal of Applied Polymer Science, 141, no. 8 (2024-02):e54989, https://doi.org/10.1002/app.54989 . .