EFFECT OF SECTION THICKNESS ON CAVITATION BEHAVIOUR OF SELECTIVE LASER SINTERED POLYAMIDE 12
Autori
Dojčinović, Marina B.Erić Cekć, Olivera A.
Ćirić-Kostić, Snežana M.
Bogojević, Nebojša M.
Sinđelić, Vladimir Z.
Konferencijski prilog (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The present study focuses the cavitation resistance results of samples obtained by the Selective Laser
Sintering technology. All samples were made from Nylon 12 – Polyamide 12 powder, also known as PA2200
in the industry, produced by EOS GmbH. The powder used for building the samples represented a mixture of
50% new powder and 50% recycled powder. Samples with different section thicknesses (0.4mm; 0.8mm and
1.0mm) were subjected to the ultrasonically induced cavitation test method to investigate the effect of geometry
on their cavitation behaviour. The change in mass loss during different cavitation times was measured on the
tested samples. The morphology of cavitation damage was characterized using Scanning Electron Microscopy
(SEM). The results obtained in this paper have shown that section thickness of the samples has a significant
influence on the cavitation resistance, with the highest cavitation resistance obtained for the samples a
thickness of 0.4mm.
Ključne reči:
Polyamide 12 powder / SLS / mass loss / cavitation resistance / section thickness / SEM / additive manufacturingIzvor:
Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2023, 04 – 07 July 2023, Zlatibor, Serbia, 2023, 19-Izdavač:
- Belgrade : University, Faculty of Mechanical Engineering
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200135 (Univerzitet u Beogradu, Tehnološko-metalurški fakultet) (RS-MESTD-inst-2020-200135)
Institucija/grupa
Tehnološko-metalurški fakultetTY - CONF AU - Dojčinović, Marina B. AU - Erić Cekć, Olivera A. AU - Ćirić-Kostić, Snežana M. AU - Bogojević, Nebojša M. AU - Sinđelić, Vladimir Z. PY - 2023 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7009 AB - The present study focuses the cavitation resistance results of samples obtained by the Selective Laser Sintering technology. All samples were made from Nylon 12 – Polyamide 12 powder, also known as PA2200 in the industry, produced by EOS GmbH. The powder used for building the samples represented a mixture of 50% new powder and 50% recycled powder. Samples with different section thicknesses (0.4mm; 0.8mm and 1.0mm) were subjected to the ultrasonically induced cavitation test method to investigate the effect of geometry on their cavitation behaviour. The change in mass loss during different cavitation times was measured on the tested samples. The morphology of cavitation damage was characterized using Scanning Electron Microscopy (SEM). The results obtained in this paper have shown that section thickness of the samples has a significant influence on the cavitation resistance, with the highest cavitation resistance obtained for the samples a thickness of 0.4mm. PB - Belgrade : University, Faculty of Mechanical Engineering C3 - Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2023, 04 – 07 July 2023, Zlatibor, Serbia T1 - EFFECT OF SECTION THICKNESS ON CAVITATION BEHAVIOUR OF SELECTIVE LASER SINTERED POLYAMIDE 12 SP - 19 UR - https://hdl.handle.net/21.15107/rcub_technorep_7009 ER -
@conference{ author = "Dojčinović, Marina B. and Erić Cekć, Olivera A. and Ćirić-Kostić, Snežana M. and Bogojević, Nebojša M. and Sinđelić, Vladimir Z.", year = "2023", abstract = "The present study focuses the cavitation resistance results of samples obtained by the Selective Laser Sintering technology. All samples were made from Nylon 12 – Polyamide 12 powder, also known as PA2200 in the industry, produced by EOS GmbH. The powder used for building the samples represented a mixture of 50% new powder and 50% recycled powder. Samples with different section thicknesses (0.4mm; 0.8mm and 1.0mm) were subjected to the ultrasonically induced cavitation test method to investigate the effect of geometry on their cavitation behaviour. The change in mass loss during different cavitation times was measured on the tested samples. The morphology of cavitation damage was characterized using Scanning Electron Microscopy (SEM). The results obtained in this paper have shown that section thickness of the samples has a significant influence on the cavitation resistance, with the highest cavitation resistance obtained for the samples a thickness of 0.4mm.", publisher = "Belgrade : University, Faculty of Mechanical Engineering", journal = "Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2023, 04 – 07 July 2023, Zlatibor, Serbia", title = "EFFECT OF SECTION THICKNESS ON CAVITATION BEHAVIOUR OF SELECTIVE LASER SINTERED POLYAMIDE 12", pages = "19", url = "https://hdl.handle.net/21.15107/rcub_technorep_7009" }
Dojčinović, M. B., Erić Cekć, O. A., Ćirić-Kostić, S. M., Bogojević, N. M.,& Sinđelić, V. Z.. (2023). EFFECT OF SECTION THICKNESS ON CAVITATION BEHAVIOUR OF SELECTIVE LASER SINTERED POLYAMIDE 12. in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2023, 04 – 07 July 2023, Zlatibor, Serbia Belgrade : University, Faculty of Mechanical Engineering., 19. https://hdl.handle.net/21.15107/rcub_technorep_7009
Dojčinović MB, Erić Cekć OA, Ćirić-Kostić SM, Bogojević NM, Sinđelić VZ. EFFECT OF SECTION THICKNESS ON CAVITATION BEHAVIOUR OF SELECTIVE LASER SINTERED POLYAMIDE 12. in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2023, 04 – 07 July 2023, Zlatibor, Serbia. 2023;:19. https://hdl.handle.net/21.15107/rcub_technorep_7009 .
Dojčinović, Marina B., Erić Cekć, Olivera A., Ćirić-Kostić, Snežana M., Bogojević, Nebojša M., Sinđelić, Vladimir Z., "EFFECT OF SECTION THICKNESS ON CAVITATION BEHAVIOUR OF SELECTIVE LASER SINTERED POLYAMIDE 12" in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2023, 04 – 07 July 2023, Zlatibor, Serbia (2023):19, https://hdl.handle.net/21.15107/rcub_technorep_7009 .