Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
Autori
Mladenović, Ivana O.Vuksanović, Marija M.
Dimitrijević, Stevan P.
Vasilić, Rastko
Radojević, Vesna J.
Vasiljević-Radović, Dana G.
Nikolić, Nebojša D.
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic regime. Morphological, structural, and roughness analysis of the pigment particles, the pure (pigment-free) Cu coating, and the Cu coatings with incorporated pigment particles were performed using SEM, XRD, and AFM techniques, respectively. Hardness and creep resistance were considered for the examination of the mechanical properties of the Cu coatings, applying Chicot–Lesage (for hardness) and Sargent–Ashby (for creep resistance) mathematical models. The wettability of the Cu coatings was examined by the static sessile drop method by a measurement of the water contact angle. The incorporation of pigment particles in the Cu deposits did not significantly affect the morphology or texture of the coatings, while the roughness of the deposits rose with the rise in pigment... particle concentrations. The hardness of the Cu coatings also increased with the increasing concentration of pigments and was greater than that obtained for the pigment-free Cu coating. The presence of the pigments caused a change in the wettability of the Cu coatings from hydrophilic (for the pigment-free Cu coating) to hydrophobic (for Cu coatings with incorporated particles) surface areas.
Ključne reči:
copper / electrodeposition / pigment / copper matrix composite coatings / morphology / structure / hardness / creep / wettabilityIzvor:
Metals, 2023, 13, 12, 1979-Izdavač:
- MDPI
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200026 (Univerzitet u Beogradu, Institut za hemiju, tehnologiju i metalurgiju - IHTM) (RS-MESTD-inst-2020-200026)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200135 (Univerzitet u Beogradu, Tehnološko-metalurški fakultet) (RS-MESTD-inst-2020-200135)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200017 (Univerzitet u Beogradu, Institut za nuklearne nauke Vinča, Beograd-Vinča) (RS-MESTD-inst-2020-200017)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200287 (Inovacioni centar Tehnološko-metalurškog fakulteta u Beogradu doo) (RS-MESTD-inst-2020-200287)
Kolekcije
Institucija/grupa
Inovacioni centarTY - JOUR AU - Mladenović, Ivana O. AU - Vuksanović, Marija M. AU - Dimitrijević, Stevan P. AU - Vasilić, Rastko AU - Radojević, Vesna J. AU - Vasiljević-Radović, Dana G. AU - Nikolić, Nebojša D. PY - 2023 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7072 AB - Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic regime. Morphological, structural, and roughness analysis of the pigment particles, the pure (pigment-free) Cu coating, and the Cu coatings with incorporated pigment particles were performed using SEM, XRD, and AFM techniques, respectively. Hardness and creep resistance were considered for the examination of the mechanical properties of the Cu coatings, applying Chicot–Lesage (for hardness) and Sargent–Ashby (for creep resistance) mathematical models. The wettability of the Cu coatings was examined by the static sessile drop method by a measurement of the water contact angle. The incorporation of pigment particles in the Cu deposits did not significantly affect the morphology or texture of the coatings, while the roughness of the deposits rose with the rise in pigment particle concentrations. The hardness of the Cu coatings also increased with the increasing concentration of pigments and was greater than that obtained for the pigment-free Cu coating. The presence of the pigments caused a change in the wettability of the Cu coatings from hydrophilic (for the pigment-free Cu coating) to hydrophobic (for Cu coatings with incorporated particles) surface areas. PB - MDPI T2 - Metals T1 - Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles IS - 12 SP - 1979 VL - 13 DO - 10.3390/met13121979 ER -
@article{ author = "Mladenović, Ivana O. and Vuksanović, Marija M. and Dimitrijević, Stevan P. and Vasilić, Rastko and Radojević, Vesna J. and Vasiljević-Radović, Dana G. and Nikolić, Nebojša D.", year = "2023", abstract = "Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic regime. Morphological, structural, and roughness analysis of the pigment particles, the pure (pigment-free) Cu coating, and the Cu coatings with incorporated pigment particles were performed using SEM, XRD, and AFM techniques, respectively. Hardness and creep resistance were considered for the examination of the mechanical properties of the Cu coatings, applying Chicot–Lesage (for hardness) and Sargent–Ashby (for creep resistance) mathematical models. The wettability of the Cu coatings was examined by the static sessile drop method by a measurement of the water contact angle. The incorporation of pigment particles in the Cu deposits did not significantly affect the morphology or texture of the coatings, while the roughness of the deposits rose with the rise in pigment particle concentrations. The hardness of the Cu coatings also increased with the increasing concentration of pigments and was greater than that obtained for the pigment-free Cu coating. The presence of the pigments caused a change in the wettability of the Cu coatings from hydrophilic (for the pigment-free Cu coating) to hydrophobic (for Cu coatings with incorporated particles) surface areas.", publisher = "MDPI", journal = "Metals", title = "Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles", number = "12", pages = "1979", volume = "13", doi = "10.3390/met13121979" }
Mladenović, I. O., Vuksanović, M. M., Dimitrijević, S. P., Vasilić, R., Radojević, V. J., Vasiljević-Radović, D. G.,& Nikolić, N. D.. (2023). Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles. in Metals MDPI., 13(12), 1979. https://doi.org/10.3390/met13121979
Mladenović IO, Vuksanović MM, Dimitrijević SP, Vasilić R, Radojević VJ, Vasiljević-Radović DG, Nikolić ND. Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles. in Metals. 2023;13(12):1979. doi:10.3390/met13121979 .
Mladenović, Ivana O., Vuksanović, Marija M., Dimitrijević, Stevan P., Vasilić, Rastko, Radojević, Vesna J., Vasiljević-Radović, Dana G., Nikolić, Nebojša D., "Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles" in Metals, 13, no. 12 (2023):1979, https://doi.org/10.3390/met13121979 . .