Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology
Аутори
Vuksanović, Marija M.Mladenović, Ivana O.
Stupar, Stevan
Marinković, Aleksandar
Jančić Heinemann, Radmila
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Polymer composites based on unsaturated polyester resin (UPR) and reinforced with particles based on unmodified/modifiedplant provenance biosilica particles were synthesized and characterized. An unsaturated polyester resin was obtained fromwaste poly (ethylene terephthalate (PET). Biosilaca particles are made from rice husk biomass. The surface of the producedsilica particles was modified using three different silanes: 3-trimethoxysilylpropyl methacrylate (MEMO), trimethoxyvinylsilane (TMEVS), and 3-aminopropyltrimethoxysilane (APTMS). The microhardness test method was used to investigatethe mechanical properties of synthesized composite material with variations in dwell times and applied loads. Optimization ofcomposite microhardness value prediction in function of synthesized parameters (type of modification of silica particles) andmeasurement parameters (applied loads and dwell times) was done using the method of response surface methodology (RSM)regression analysis. The maximal mic...rohardness values (0.459 GPa) were obtained of type modification of silica particles withvinyl with 80% confidence for 120 experimental variables. This method can be used to choose the optimal dwell time and loadfor comparison of measurements between different composite materials and to enable the choice of the material in terms ofoptimization of the quality of reinforcement and quality of interphase determined by surface modification.
Кључне речи:
Unsaturated polyester composites / biosilica / response surface methodology / optimizationИзвор:
Polymers and Polymer Composites, 2024, 32Издавач:
- SAGE Publications Ltd.
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200026 (Универзитет у Београду, Институт за хемију, технологију и металургију - ИХТМ) (RS-MESTD-inst-2020-200026)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200135 (Универзитет у Београду, Технолошко-металуршки факултет) (RS-MESTD-inst-2020-200135)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200017 (Универзитет у Београду, Институт за нуклеарне науке Винча, Београд-Винча) (RS-MESTD-inst-2020-200017)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200287 (Иновациони центар Технолошко-металуршког факултета у Београду доо) (RS-MESTD-inst-2020-200287)
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Vuksanović, Marija M. AU - Mladenović, Ivana O. AU - Stupar, Stevan AU - Marinković, Aleksandar AU - Jančić Heinemann, Radmila PY - 2024 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7148 AB - Polymer composites based on unsaturated polyester resin (UPR) and reinforced with particles based on unmodified/modifiedplant provenance biosilica particles were synthesized and characterized. An unsaturated polyester resin was obtained fromwaste poly (ethylene terephthalate (PET). Biosilaca particles are made from rice husk biomass. The surface of the producedsilica particles was modified using three different silanes: 3-trimethoxysilylpropyl methacrylate (MEMO), trimethoxyvinylsilane (TMEVS), and 3-aminopropyltrimethoxysilane (APTMS). The microhardness test method was used to investigatethe mechanical properties of synthesized composite material with variations in dwell times and applied loads. Optimization ofcomposite microhardness value prediction in function of synthesized parameters (type of modification of silica particles) andmeasurement parameters (applied loads and dwell times) was done using the method of response surface methodology (RSM)regression analysis. The maximal microhardness values (0.459 GPa) were obtained of type modification of silica particles withvinyl with 80% confidence for 120 experimental variables. This method can be used to choose the optimal dwell time and loadfor comparison of measurements between different composite materials and to enable the choice of the material in terms ofoptimization of the quality of reinforcement and quality of interphase determined by surface modification. PB - SAGE Publications Ltd. T2 - Polymers and Polymer Composites T1 - Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology VL - 32 DO - 10.1177/09673911241228092 ER -
@article{ author = "Vuksanović, Marija M. and Mladenović, Ivana O. and Stupar, Stevan and Marinković, Aleksandar and Jančić Heinemann, Radmila", year = "2024", abstract = "Polymer composites based on unsaturated polyester resin (UPR) and reinforced with particles based on unmodified/modifiedplant provenance biosilica particles were synthesized and characterized. An unsaturated polyester resin was obtained fromwaste poly (ethylene terephthalate (PET). Biosilaca particles are made from rice husk biomass. The surface of the producedsilica particles was modified using three different silanes: 3-trimethoxysilylpropyl methacrylate (MEMO), trimethoxyvinylsilane (TMEVS), and 3-aminopropyltrimethoxysilane (APTMS). The microhardness test method was used to investigatethe mechanical properties of synthesized composite material with variations in dwell times and applied loads. Optimization ofcomposite microhardness value prediction in function of synthesized parameters (type of modification of silica particles) andmeasurement parameters (applied loads and dwell times) was done using the method of response surface methodology (RSM)regression analysis. The maximal microhardness values (0.459 GPa) were obtained of type modification of silica particles withvinyl with 80% confidence for 120 experimental variables. This method can be used to choose the optimal dwell time and loadfor comparison of measurements between different composite materials and to enable the choice of the material in terms ofoptimization of the quality of reinforcement and quality of interphase determined by surface modification.", publisher = "SAGE Publications Ltd.", journal = "Polymers and Polymer Composites", title = "Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology", volume = "32", doi = "10.1177/09673911241228092" }
Vuksanović, M. M., Mladenović, I. O., Stupar, S., Marinković, A.,& Jančić Heinemann, R.. (2024). Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology. in Polymers and Polymer Composites SAGE Publications Ltd.., 32. https://doi.org/10.1177/09673911241228092
Vuksanović MM, Mladenović IO, Stupar S, Marinković A, Jančić Heinemann R. Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology. in Polymers and Polymer Composites. 2024;32. doi:10.1177/09673911241228092 .
Vuksanović, Marija M., Mladenović, Ivana O., Stupar, Stevan, Marinković, Aleksandar, Jančić Heinemann, Radmila, "Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology" in Polymers and Polymer Composites, 32 (2024), https://doi.org/10.1177/09673911241228092 . .