Formability of Al-Mg4.5-Cu0.5 alloy sheets was tested after annealing at different temperatures (220-520 degrees C) and water quenching. The formability (normalized limiting dome heights, LDH/R) showed only a small variation for all the samples with recrystallized structure, i.e. the LDH/R-e(2) curves were within similar to 13% in the range of plane strain deformation. The samples annealed at 280 degrees C experienced a formability level at the upper limit of the band containing all the LDHIR values. The formability rating seems to be the result of the complex interaction of the strain hardening ability and strain rate sensitivity (SRS) due to different structural features developed during different annealing conditions.
TY - JOUR
AU - Romhanji, Endre
AU - Popović, Miljana
AU - Glišić, Dragomir
AU - Dodok, Radomir
AU - Jovanović, D.
PY - 2006
UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/971
AB - Formability of Al-Mg4.5-Cu0.5 alloy sheets was tested after annealing at different temperatures (220-520 degrees C) and water quenching. The formability (normalized limiting dome heights, LDH/R) showed only a small variation for all the samples with recrystallized structure, i.e. the LDH/R-e(2) curves were within similar to 13% in the range of plane strain deformation. The samples annealed at 280 degrees C experienced a formability level at the upper limit of the band containing all the LDHIR values. The formability rating seems to be the result of the complex interaction of the strain hardening ability and strain rate sensitivity (SRS) due to different structural features developed during different annealing conditions.
PB - Elsevier Science Sa, Lausanne
T2 - Journal of Materials Processing Technology
T1 - Effect of annealing temperature on the formability of Al-Mg4.5-Cu0.5 alloy sheets
EP - 389
IS - 1-3
SP - 386
VL - 177
DO - 10.1016/j.jmatprotec.2006.04.036
ER -
@article{
author = "Romhanji, Endre and Popović, Miljana and Glišić, Dragomir and Dodok, Radomir and Jovanović, D.",
year = "2006",
abstract = "Formability of Al-Mg4.5-Cu0.5 alloy sheets was tested after annealing at different temperatures (220-520 degrees C) and water quenching. The formability (normalized limiting dome heights, LDH/R) showed only a small variation for all the samples with recrystallized structure, i.e. the LDH/R-e(2) curves were within similar to 13% in the range of plane strain deformation. The samples annealed at 280 degrees C experienced a formability level at the upper limit of the band containing all the LDHIR values. The formability rating seems to be the result of the complex interaction of the strain hardening ability and strain rate sensitivity (SRS) due to different structural features developed during different annealing conditions.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Journal of Materials Processing Technology",
title = "Effect of annealing temperature on the formability of Al-Mg4.5-Cu0.5 alloy sheets",
pages = "389-386",
number = "1-3",
volume = "177",
doi = "10.1016/j.jmatprotec.2006.04.036"
}
Romhanji, E., Popović, M., Glišić, D., Dodok, R.,& Jovanović, D.. (2006). Effect of annealing temperature on the formability of Al-Mg4.5-Cu0.5 alloy sheets. in Journal of Materials Processing Technology
Elsevier Science Sa, Lausanne., 177(1-3), 386-389.
https://doi.org/10.1016/j.jmatprotec.2006.04.036
Romhanji E, Popović M, Glišić D, Dodok R, Jovanović D. Effect of annealing temperature on the formability of Al-Mg4.5-Cu0.5 alloy sheets. in Journal of Materials Processing Technology. 2006;177(1-3):386-389.
doi:10.1016/j.jmatprotec.2006.04.036 .
Romhanji, Endre, Popović, Miljana, Glišić, Dragomir, Dodok, Radomir, Jovanović, D., "Effect of annealing temperature on the formability of Al-Mg4.5-Cu0.5 alloy sheets" in Journal of Materials Processing Technology, 177, no. 1-3 (2006):386-389,
https://doi.org/10.1016/j.jmatprotec.2006.04.036 . .
