Show simple item record

Ocena podobnosti za upotrebu zagrejača napojne vode posle popravke

dc.creatorManeski, Taško
dc.creatorSedmak, Aleksandar
dc.creatorMilović, Ljubica
dc.creatorFertilio, Antun
dc.creatorSedmak, Stojan
dc.date.accessioned2021-03-10T10:36:29Z
dc.date.available2021-03-10T10:36:29Z
dc.date.issued2006
dc.identifier.issn1451-3749
dc.identifier.urihttp://TechnoRep.tmf.bg.ac.rs/handle/123456789/985
dc.description.abstractThe leakage of tube-tubesheet joint of feedwater heater on the inlet required redesign and repair by additional tube welding. The original design took into account only the sealing, and subsequently after some period leakage occurred due to tube displacement in tubesheet, caused by thermal and mechanical overload. Repair procedure included cutting out the heater header along the welded joint, preparing and welding the tubes to the tubesheet and repeated welding of the header. The header and tubesheet are made of carbon steel. Welding procedure anticipated an austenitic soft interlayer and local heat treatment for residual stress relaxation before final joining. Fitness-for-purpose assessment has been issued and models were developed by finite element analysis according to the design solution and condition after repair. The results of mechanical and thermal responses of model confirmed that repaired feedwater heater is fit for purpose.en
dc.description.abstractPricurivanje na spoju cevi i cevne place na ulazu u zagrejač vode je zahtevalo rekonstrukciju i popravku dodatnim zavarivanjem cevi. Prvobitnim projektom je u obzir uzeto samo zaptivanje i posle nekog vremena u radu je došlo do curenja zbog pomeranja cevi u cevnoj ploči, izazvanog termičkim i mehaničkim preopterećenjem. Postupak popravke je predvideo isecanje glave zagrejača po zavarenom spoju, pripremu i zavarivanje cevi za cevnu ploču, i ponovno zavarivanje glave. Glava i cevna ploča su izrađeni od ugljeničnog čelika. Postupak zavarivanja je predvideo austenitni meki sloj i lokalnu termičku obradu za otpuštanje zaostalih napona pre završnog spajanja. Ocena podobnosti za upotrebu je zahtevana i razvijeni su modeli prema projektnom rešenju i stanju posle popravke analizom konačnim elementima Rezultati mehaničkog i termičkog odgovora modela su potvrdili da je popravljeni zagrejač napojne vode podoban za upotrebu.sr
dc.publisherSociety for Structural Integrity and Life, Institute for Material Testing
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceIntegritet i vek konstrukcija
dc.subjectwater heateren
dc.subjectfitness-for-purposeen
dc.subjectrepair by weldingen
dc.subjectmodelingen
dc.subjectstress analysisen
dc.subjectzagrejacč vodesr
dc.subjectpodobnost za upotrebusr
dc.subjectpopravka zavarivanjemsr
dc.subjectmodelovanjesr
dc.subjectanaliza naponasr
dc.titleFitness-for-purpose assessment of repaired feedwater heateren
dc.titleOcena podobnosti za upotrebu zagrejača napojne vode posle popravkesr
dc.typearticle
dc.rights.licenseBY-NC-ND
dc.citation.epage120
dc.citation.issue3
dc.citation.other6(3): 111-120
dc.citation.spage111
dc.citation.volume6
dc.identifier.fulltexthttp://TechnoRep.tmf.bg.ac.rs/bitstream/id/10790/111-IVK3-2006-TM-AS-LjM-AF-SS.pdf
dc.identifier.rcubconv_1573
dc.type.versionpublishedVersion


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record