Dojčinović, M., Pavlović, M., Andrić, L., Petrov, M.,& Radulović, D. S.. (2023). Optimizacija i unapređenje sinteze i karakterizacije bazaltnog liva. .
https://hdl.handle.net/21.15107/rcub_technorep_7010

Dojčinović M, Pavlović M, Andrić L, Petrov M, Radulović DS. Optimizacija i unapređenje sinteze i karakterizacije bazaltnog liva. 2023;.
https://hdl.handle.net/21.15107/rcub_technorep_7010 .

Dojčinović, Marina, Pavlović, Marko, Andrić, Ljubiša, Petrov, Milan, Radulović, Dragan S., "Optimizacija i unapređenje sinteze i karakterizacije bazaltnog liva" (2023),
https://hdl.handle.net/21.15107/rcub_technorep_7010 .

TY  - JOUR
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Harbinja, Muhamed
AU  - Hođić, Atif
AU  - Stojanović, Mirjana
AU  - Čeganjac, Zoran
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6995
AB  - The paper presents the results of synthesis and characterisation of refractory coatings based on various fillers
intended for the protection of metallic structures. Refractory
fillers applied are based on mullite, cordierite, zirconium
silicate, and pyrophyllite. Refractory filler samples are treated
by micronization grinding down to 15 m filler particles.
Methods as XRD, SEM, and optical microscopy are used
for characterisation. Performed tests determined the optimal
composition of protective coatings and manufacturing processes. According to standard ASTM G32 an ultrasonic vibrational method with stationary sample was used for characterising the obtained coatings. The goal of the research was
to determine the coating quality and its applications in
metallic surface protection in conditions of wear, corrosion,
cavitation, and high temperature. All coatings were tested
under the same conditions. A comparison of cavitation resistance is given for tested coatings. Coating quality is evaluated based on cavitation loss rate and on the analysis of
sample surface damage formation and development under
effects of cavitation.
AB  - U radu su prikazani rezultati sinteze i karakterizacije
vatrostalnih premaza na bazi različitih punioca namenjenih
za zaštitu metalnih konstrukcija. Korišćeni su vatrostalni
punioci na bazi mulita, kordijerita, cirkonijum silikata i
pirofilita. Uzorci vatrostalnih punioca podvrgnuti su mikronizirajućem mlevenju na veličinu zrna punioca 15 m. Za
karakterizaciju dobijenih punioca korišćene su metode XRD,
SEM i optička mikroskopija. Ispitivanjem je određen optimalni sastav zaštitnih premaza i postupci njihove izrade. Za
karakterizaciju dobijenih premaza primenjena je ultrazvučna
vibraciona metoda sa stacionarnim uzorkom prema standardu ASTM G32. Cilj ispitivanja bio je određivanje kvaliteta premaza i mogućnosti primene za zaštitu metalnih površina u uslovima habanja, korozije, kavitacije i povišenih temperatura. Svi premazi su ispitivani pod istim uslovima. Prikazan je uporedni pregled kavitacione otpornosti ispitivanih
premaza. Kvalitet premaza ocenjen je na osnovu vrednosti
kavitacione brzine, analize nastajanja i razvoja oštećenja
površine uzoraka pod dejstvom kavitacije.
PB  - Society for Structural Integrity and Life (DIVK)
T2  - Structural Integrity and Life
T1  - New types of protective coatings and development of test methods
T1  - Nove vrste zaštitnih premaza i razvoj metoda ispitivanja
EP  - 260
IS  - 3
SP  - 257
VL  - 23
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6995
ER  - 

@article{
author = "Pavlović, Marko and Dojčinović, Marina and Harbinja, Muhamed and Hođić, Atif and Stojanović, Mirjana and Čeganjac, Zoran",
year = "2023",
abstract = "The paper presents the results of synthesis and characterisation of refractory coatings based on various fillers
intended for the protection of metallic structures. Refractory
fillers applied are based on mullite, cordierite, zirconium
silicate, and pyrophyllite. Refractory filler samples are treated
by micronization grinding down to 15 m filler particles.
Methods as XRD, SEM, and optical microscopy are used
for characterisation. Performed tests determined the optimal
composition of protective coatings and manufacturing processes. According to standard ASTM G32 an ultrasonic vibrational method with stationary sample was used for characterising the obtained coatings. The goal of the research was
to determine the coating quality and its applications in
metallic surface protection in conditions of wear, corrosion,
cavitation, and high temperature. All coatings were tested
under the same conditions. A comparison of cavitation resistance is given for tested coatings. Coating quality is evaluated based on cavitation loss rate and on the analysis of
sample surface damage formation and development under
effects of cavitation., U radu su prikazani rezultati sinteze i karakterizacije
vatrostalnih premaza na bazi različitih punioca namenjenih
za zaštitu metalnih konstrukcija. Korišćeni su vatrostalni
punioci na bazi mulita, kordijerita, cirkonijum silikata i
pirofilita. Uzorci vatrostalnih punioca podvrgnuti su mikronizirajućem mlevenju na veličinu zrna punioca 15 m. Za
karakterizaciju dobijenih punioca korišćene su metode XRD,
SEM i optička mikroskopija. Ispitivanjem je određen optimalni sastav zaštitnih premaza i postupci njihove izrade. Za
karakterizaciju dobijenih premaza primenjena je ultrazvučna
vibraciona metoda sa stacionarnim uzorkom prema standardu ASTM G32. Cilj ispitivanja bio je određivanje kvaliteta premaza i mogućnosti primene za zaštitu metalnih površina u uslovima habanja, korozije, kavitacije i povišenih temperatura. Svi premazi su ispitivani pod istim uslovima. Prikazan je uporedni pregled kavitacione otpornosti ispitivanih
premaza. Kvalitet premaza ocenjen je na osnovu vrednosti
kavitacione brzine, analize nastajanja i razvoja oštećenja
površine uzoraka pod dejstvom kavitacije.",
publisher = "Society for Structural Integrity and Life (DIVK)",
journal = "Structural Integrity and Life",
title = "New types of protective coatings and development of test methods, Nove vrste zaštitnih premaza i razvoj metoda ispitivanja",
pages = "260-257",
number = "3",
volume = "23",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6995"
}

Pavlović, M., Dojčinović, M., Harbinja, M., Hođić, A., Stojanović, M.,& Čeganjac, Z.. (2023). New types of protective coatings and development of test methods. in Structural Integrity and Life
Society for Structural Integrity and Life (DIVK)., 23(3), 257-260.
https://hdl.handle.net/21.15107/rcub_technorep_6995

Pavlović M, Dojčinović M, Harbinja M, Hođić A, Stojanović M, Čeganjac Z. New types of protective coatings and development of test methods. in Structural Integrity and Life. 2023;23(3):257-260.
https://hdl.handle.net/21.15107/rcub_technorep_6995 .

Pavlović, Marko, Dojčinović, Marina, Harbinja, Muhamed, Hođić, Atif, Stojanović, Mirjana, Čeganjac, Zoran, "New types of protective coatings and development of test methods" in Structural Integrity and Life, 23, no. 3 (2023):257-260,
https://hdl.handle.net/21.15107/rcub_technorep_6995 .

TY  - CONF
AU  - Pavlović, Marko
AU  - Tanasković, Zorica
AU  - Dojčinović, Marina
AU  - Aćimović, Zagorka
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7004
AB  - The composition and production procedures of refractory coatings based on zirconium silicate for the protection of metal
structures in conditions of wear, cavitation and corrosion were investigated in the paper. The composition of the coating was defined
with a filler based on zirconium silicate, a binder based on epoxy resin, organic additives and an organic solvent. A method for quality
control of obtained coatings was investigated using the ultrasonic vibration method with a stationary sample according to the ASTM
G 32 standard.
The following methods were used to characterize the obtained filler samples: X-ray diffraction analysis (XRD) and scanning electron
microscopy (SEM). The change in the mass of the samples as a function of the cavitation time was monitored and the cavitation rate
was determined. The formation and development of damage to the coating surface was monitored using a scanning electron
microscope. The obtained test results showed a satisfactory resistance of the protective coatings to the effect of cavitation, with small
damage to the coating surface and a cavitation rate of 0.6 mg/min. Tests have shown that the application of the ultrasonic vibration
method is suitable for a quick assessment of the quality of protective coatings during synthesis and a forecast of their resistance and
stability during exploitation in the protection of equipment parts in mining and metallurgy.
PB  - Užice : Akademija strukovnih studija "Zapadna Srbija", Odsek Užice
C3  - Proceedings / 13th International Conference Science and Higher Education in Function of Sustainable Development - SED 2023, 5th - 8th June 2023, Vrnjacka Banja, Serbia
T1  - QUALLITY MANAGEMENT OF PROCETIVE COATINGS BASED ON ZIRCONIUM SILICATE
EP  - 4-58
SP  - 4-55
UR  - https://hdl.handle.net/21.15107/rcub_technorep_7004
ER  - 

@conference{
author = "Pavlović, Marko and Tanasković, Zorica and Dojčinović, Marina and Aćimović, Zagorka",
year = "2023",
abstract = "The composition and production procedures of refractory coatings based on zirconium silicate for the protection of metal
structures in conditions of wear, cavitation and corrosion were investigated in the paper. The composition of the coating was defined
with a filler based on zirconium silicate, a binder based on epoxy resin, organic additives and an organic solvent. A method for quality
control of obtained coatings was investigated using the ultrasonic vibration method with a stationary sample according to the ASTM
G 32 standard.
The following methods were used to characterize the obtained filler samples: X-ray diffraction analysis (XRD) and scanning electron
microscopy (SEM). The change in the mass of the samples as a function of the cavitation time was monitored and the cavitation rate
was determined. The formation and development of damage to the coating surface was monitored using a scanning electron
microscope. The obtained test results showed a satisfactory resistance of the protective coatings to the effect of cavitation, with small
damage to the coating surface and a cavitation rate of 0.6 mg/min. Tests have shown that the application of the ultrasonic vibration
method is suitable for a quick assessment of the quality of protective coatings during synthesis and a forecast of their resistance and
stability during exploitation in the protection of equipment parts in mining and metallurgy.",
publisher = "Užice : Akademija strukovnih studija "Zapadna Srbija", Odsek Užice",
journal = "Proceedings / 13th International Conference Science and Higher Education in Function of Sustainable Development - SED 2023, 5th - 8th June 2023, Vrnjacka Banja, Serbia",
title = "QUALLITY MANAGEMENT OF PROCETIVE COATINGS BASED ON ZIRCONIUM SILICATE",
pages = "4-58-4-55",
url = "https://hdl.handle.net/21.15107/rcub_technorep_7004"
}

Pavlović, M., Tanasković, Z., Dojčinović, M.,& Aćimović, Z.. (2023). QUALLITY MANAGEMENT OF PROCETIVE COATINGS BASED ON ZIRCONIUM SILICATE. in Proceedings / 13th International Conference Science and Higher Education in Function of Sustainable Development - SED 2023, 5th - 8th June 2023, Vrnjacka Banja, Serbia
Užice : Akademija strukovnih studija "Zapadna Srbija", Odsek Užice., 4-55-4-58.
https://hdl.handle.net/21.15107/rcub_technorep_7004

Pavlović M, Tanasković Z, Dojčinović M, Aćimović Z. QUALLITY MANAGEMENT OF PROCETIVE COATINGS BASED ON ZIRCONIUM SILICATE. in Proceedings / 13th International Conference Science and Higher Education in Function of Sustainable Development - SED 2023, 5th - 8th June 2023, Vrnjacka Banja, Serbia. 2023;:4-55-4-58.
https://hdl.handle.net/21.15107/rcub_technorep_7004 .

Pavlović, Marko, Tanasković, Zorica, Dojčinović, Marina, Aćimović, Zagorka, "QUALLITY MANAGEMENT OF PROCETIVE COATINGS BASED ON ZIRCONIUM SILICATE" in Proceedings / 13th International Conference Science and Higher Education in Function of Sustainable Development - SED 2023, 5th - 8th June 2023, Vrnjacka Banja, Serbia (2023):4-55-4-58,
https://hdl.handle.net/21.15107/rcub_technorep_7004 .

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Harbinja, Muhamed
AU  - Hođić, Atif
AU  - Radulović, Dragan
AU  - Stojanović, Mirjana
AU  - Aćimović, Zagorka
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7005
AB  - In the paper, samples of protective coatings based on pyrophyllite were examined. The initial sample of
pyrophyllite was obtained from the Parsovići deposit, Konjic, Sarajevo, AD Harbi BiH. Pyrophyllite
samples were subjected to micronizing grinding to a filler grain size of 20 μm. XRD, SEM and optical
microscopy methods were used to characterize the obtained fillers based on pyrophyllite. The optimal
composition of protective coatings based on pyrophyllite and the manufacturing process were determined.
The resistance of refractory coatings to the effect of cavitation was experimentally determined using the
ultrasonic vibration method with a stationary sample according to the ASTM G32 standard. Based on the
value of the cavitation rate, the analysis of the formation and development of damage to the surface of the
samples, the possibility of applying a protective coating in the conditions of exploitation in which the
occurrence of corrosion and cavitation is expected was assessed.
PB  - Bor : University of Belgrade, Technical Faculty
C3  - Proceedings / 54th International October Conference on Mining and Metallurgy - IOC 2023, 18-21 October 2023, Bor Lake, Serbia
T1  - EFFECTS OF THE APPLICATION OF PYROPHYLITE IN THE COMPOSITION OF PROTECTIVE COATINGS
EP  - 360
SP  - 357
UR  - https://hdl.handle.net/21.15107/rcub_technorep_7005
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Harbinja, Muhamed and Hođić, Atif and Radulović, Dragan and Stojanović, Mirjana and Aćimović, Zagorka",
year = "2023",
abstract = "In the paper, samples of protective coatings based on pyrophyllite were examined. The initial sample of
pyrophyllite was obtained from the Parsovići deposit, Konjic, Sarajevo, AD Harbi BiH. Pyrophyllite
samples were subjected to micronizing grinding to a filler grain size of 20 μm. XRD, SEM and optical
microscopy methods were used to characterize the obtained fillers based on pyrophyllite. The optimal
composition of protective coatings based on pyrophyllite and the manufacturing process were determined.
The resistance of refractory coatings to the effect of cavitation was experimentally determined using the
ultrasonic vibration method with a stationary sample according to the ASTM G32 standard. Based on the
value of the cavitation rate, the analysis of the formation and development of damage to the surface of the
samples, the possibility of applying a protective coating in the conditions of exploitation in which the
occurrence of corrosion and cavitation is expected was assessed.",
publisher = "Bor : University of Belgrade, Technical Faculty",
journal = "Proceedings / 54th International October Conference on Mining and Metallurgy - IOC 2023, 18-21 October 2023, Bor Lake, Serbia",
title = "EFFECTS OF THE APPLICATION OF PYROPHYLITE IN THE COMPOSITION OF PROTECTIVE COATINGS",
pages = "360-357",
url = "https://hdl.handle.net/21.15107/rcub_technorep_7005"
}

Pavlović, M., Dojčinović, M., Harbinja, M., Hođić, A., Radulović, D., Stojanović, M.,& Aćimović, Z.. (2023). EFFECTS OF THE APPLICATION OF PYROPHYLITE IN THE COMPOSITION OF PROTECTIVE COATINGS. in Proceedings / 54th International October Conference on Mining and Metallurgy - IOC 2023, 18-21 October 2023, Bor Lake, Serbia
Bor : University of Belgrade, Technical Faculty., 357-360.
https://hdl.handle.net/21.15107/rcub_technorep_7005

Pavlović M, Dojčinović M, Harbinja M, Hođić A, Radulović D, Stojanović M, Aćimović Z. EFFECTS OF THE APPLICATION OF PYROPHYLITE IN THE COMPOSITION OF PROTECTIVE COATINGS. in Proceedings / 54th International October Conference on Mining and Metallurgy - IOC 2023, 18-21 October 2023, Bor Lake, Serbia. 2023;:357-360.
https://hdl.handle.net/21.15107/rcub_technorep_7005 .

Pavlović, Marko, Dojčinović, Marina, Harbinja, Muhamed, Hođić, Atif, Radulović, Dragan, Stojanović, Mirjana, Aćimović, Zagorka, "EFFECTS OF THE APPLICATION OF PYROPHYLITE IN THE COMPOSITION OF PROTECTIVE COATINGS" in Proceedings / 54th International October Conference on Mining and Metallurgy - IOC 2023, 18-21 October 2023, Bor Lake, Serbia (2023):357-360,
https://hdl.handle.net/21.15107/rcub_technorep_7005 .

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Sedmak, Aleksandar
AU  - Martić, Igor
AU  - Vučetić, Filip
AU  - Aćimović, Zagorka
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7022
AB  - Composition and production procedures of the mullite-based coatings for the protection of metal surfaces in the conditions of cavitation, wear and corrosion were investigated. An ultrasonic vibration method according to the ASTM G32 standard was used to characterize the coating. The change in the mass of samples as a function of the cavitation time was monitored and the cavitation rate was determined. The occurrence and development of the coating surface damage were monitored using a scanning electron microscope. Based on the value of cavitation rate and analysis of the surface damage morphology, the cavitation resistance of coating was determined. Coatings have shown the satisfactory resistance in the conditions of cavitation and possibility of application for the protection of parts of equipment in metallurgy and mining.
PB  - Bor : Mining and Metallurgy Institute
C3  - Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor
T1  - SYNTHESIS AND CHARACTERISATION OF THE MULLITE-BASED PROTECTIVE COATINGS
EP  - 150
SP  - 147
UR  - https://hdl.handle.net/21.15107/rcub_technorep_7022
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Sedmak, Aleksandar and Martić, Igor and Vučetić, Filip and Aćimović, Zagorka",
year = "2022",
abstract = "Composition and production procedures of the mullite-based coatings for the protection of metal surfaces in the conditions of cavitation, wear and corrosion were investigated. An ultrasonic vibration method according to the ASTM G32 standard was used to characterize the coating. The change in the mass of samples as a function of the cavitation time was monitored and the cavitation rate was determined. The occurrence and development of the coating surface damage were monitored using a scanning electron microscope. Based on the value of cavitation rate and analysis of the surface damage morphology, the cavitation resistance of coating was determined. Coatings have shown the satisfactory resistance in the conditions of cavitation and possibility of application for the protection of parts of equipment in metallurgy and mining.",
publisher = "Bor : Mining and Metallurgy Institute",
journal = "Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor",
title = "SYNTHESIS AND CHARACTERISATION OF THE MULLITE-BASED PROTECTIVE COATINGS",
pages = "150-147",
url = "https://hdl.handle.net/21.15107/rcub_technorep_7022"
}

Pavlović, M., Dojčinović, M., Sedmak, A., Martić, I., Vučetić, F.,& Aćimović, Z.. (2022). SYNTHESIS AND CHARACTERISATION OF THE MULLITE-BASED PROTECTIVE COATINGS. in Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor
Bor : Mining and Metallurgy Institute., 147-150.
https://hdl.handle.net/21.15107/rcub_technorep_7022

Pavlović M, Dojčinović M, Sedmak A, Martić I, Vučetić F, Aćimović Z. SYNTHESIS AND CHARACTERISATION OF THE MULLITE-BASED PROTECTIVE COATINGS. in Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor. 2022;:147-150.
https://hdl.handle.net/21.15107/rcub_technorep_7022 .

Pavlović, Marko, Dojčinović, Marina, Sedmak, Aleksandar, Martić, Igor, Vučetić, Filip, Aćimović, Zagorka, "SYNTHESIS AND CHARACTERISATION OF THE MULLITE-BASED PROTECTIVE COATINGS" in Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor (2022):147-150,
https://hdl.handle.net/21.15107/rcub_technorep_7022 .

TY  - CONF
AU  - Dojčinović, Marina
AU  - Pavlović, Marko
AU  - Jezdimirović, Slađana
AU  - Purić, Branka
AU  - Cvetković, Aleksandar
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7056
AB  - Cavitation resistance of polymer matrix/basalt powder composites was determined in this work.
Two types of composites were tested: epoxy resin / basalt powder composite and polyester resin /
basalt powder composite. In both cases, a basalt powder was used as reinforcement in the resin
(grain size 20µm, in the amount of 15 wt%). An ultrasonic vibration method with a stationary
sample was used to test the cavitation resistance of composites in laboratory conditions.The change 
in sample mass with test time was monitored to define cavitation rate. Scanning electron microscopy 
was used to monitor the morphology of composites surface damage.
PB  - Banja Luka : Faculty of Mechanical Engineering
C3  - Proceedings : DEMI 2021 / 15th international conference on accomplishments in mechanical and industrial engineering, Banja Luka, May 2021
T1  - Influence of the polymer matrix type on cavitation resistance of composites
EP  - 386
SP  - 383
UR  - https://hdl.handle.net/21.15107/rcub_technorep_7056
ER  - 

@conference{
author = "Dojčinović, Marina and Pavlović, Marko and Jezdimirović, Slađana and Purić, Branka and Cvetković, Aleksandar",
year = "2021",
abstract = "Cavitation resistance of polymer matrix/basalt powder composites was determined in this work.
Two types of composites were tested: epoxy resin / basalt powder composite and polyester resin /
basalt powder composite. In both cases, a basalt powder was used as reinforcement in the resin
(grain size 20µm, in the amount of 15 wt%). An ultrasonic vibration method with a stationary
sample was used to test the cavitation resistance of composites in laboratory conditions.The change 
in sample mass with test time was monitored to define cavitation rate. Scanning electron microscopy 
was used to monitor the morphology of composites surface damage.",
publisher = "Banja Luka : Faculty of Mechanical Engineering",
journal = "Proceedings : DEMI 2021 / 15th international conference on accomplishments in mechanical and industrial engineering, Banja Luka, May 2021",
title = "Influence of the polymer matrix type on cavitation resistance of composites",
pages = "386-383",
url = "https://hdl.handle.net/21.15107/rcub_technorep_7056"
}

Dojčinović, M., Pavlović, M., Jezdimirović, S., Purić, B.,& Cvetković, A.. (2021). Influence of the polymer matrix type on cavitation resistance of composites. in Proceedings : DEMI 2021 / 15th international conference on accomplishments in mechanical and industrial engineering, Banja Luka, May 2021
Banja Luka : Faculty of Mechanical Engineering., 383-386.
https://hdl.handle.net/21.15107/rcub_technorep_7056

Dojčinović M, Pavlović M, Jezdimirović S, Purić B, Cvetković A. Influence of the polymer matrix type on cavitation resistance of composites. in Proceedings : DEMI 2021 / 15th international conference on accomplishments in mechanical and industrial engineering, Banja Luka, May 2021. 2021;:383-386.
https://hdl.handle.net/21.15107/rcub_technorep_7056 .

Dojčinović, Marina, Pavlović, Marko, Jezdimirović, Slađana, Purić, Branka, Cvetković, Aleksandar, "Influence of the polymer matrix type on cavitation resistance of composites" in Proceedings : DEMI 2021 / 15th international conference on accomplishments in mechanical and industrial engineering, Banja Luka, May 2021 (2021):383-386,
https://hdl.handle.net/21.15107/rcub_technorep_7056 .

TY  - JOUR
AU  - Dojčinović, Marina
AU  - Pavlović, Marko
AU  - Jezdimirović, Slađana
AU  - Purić, Branka
AU  - Cvetković, Aleksandar
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7060
AB  - Cavitation resistance of polymer matrix / basalt powder composites was determined in this work. Two types of composites
were tested: epoxy resin / basalt powder composite and polyester resin / basalt powder composite. In both cases, a basalt
powder was used as reinforcement in the resin (grain size 20μm, in the amount of 15 wt%). An ultrasonic vibration method
with a stationary sample was used to test the cavitation resistance of composites in laboratory conditions. The change in
sample mass with test time was monitored to define cavitation rate. Scanning electron microscopy was used to monitor the
morphology of composites surface damage.
PB  - University of Novi Sad, Faculty of Technical Sciences
T2  - Advanced Technologies & Materials
T1  - Influence of the polymer matrix type on cavitation resistance of composites
EP  - 34
IS  - 1
SP  - 31
VL  - 46
DO  - 10.24867/ATM-2021-1-006
ER  - 

@article{
author = "Dojčinović, Marina and Pavlović, Marko and Jezdimirović, Slađana and Purić, Branka and Cvetković, Aleksandar",
year = "2021",
abstract = "Cavitation resistance of polymer matrix / basalt powder composites was determined in this work. Two types of composites
were tested: epoxy resin / basalt powder composite and polyester resin / basalt powder composite. In both cases, a basalt
powder was used as reinforcement in the resin (grain size 20μm, in the amount of 15 wt%). An ultrasonic vibration method
with a stationary sample was used to test the cavitation resistance of composites in laboratory conditions. The change in
sample mass with test time was monitored to define cavitation rate. Scanning electron microscopy was used to monitor the
morphology of composites surface damage.",
publisher = "University of Novi Sad, Faculty of Technical Sciences",
journal = "Advanced Technologies & Materials",
title = "Influence of the polymer matrix type on cavitation resistance of composites",
pages = "34-31",
number = "1",
volume = "46",
doi = "10.24867/ATM-2021-1-006"
}

Dojčinović, M., Pavlović, M., Jezdimirović, S., Purić, B.,& Cvetković, A.. (2021). Influence of the polymer matrix type on cavitation resistance of composites. in Advanced Technologies & Materials
University of Novi Sad, Faculty of Technical Sciences., 46(1), 31-34.
https://doi.org/10.24867/ATM-2021-1-006

Dojčinović M, Pavlović M, Jezdimirović S, Purić B, Cvetković A. Influence of the polymer matrix type on cavitation resistance of composites. in Advanced Technologies & Materials. 2021;46(1):31-34.
doi:10.24867/ATM-2021-1-006 .

Dojčinović, Marina, Pavlović, Marko, Jezdimirović, Slađana, Purić, Branka, Cvetković, Aleksandar, "Influence of the polymer matrix type on cavitation resistance of composites" in Advanced Technologies & Materials, 46, no. 1 (2021):31-34,
https://doi.org/10.24867/ATM-2021-1-006 . .

TY  - CONF
AU  - Pavlović, Marko
AU  - Trumbulović, Ljiljana
AU  - Dojčinović, Marina
AU  - Čeganjac, Zoran
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7061
AB  - This paper presents the results of research on coatings based on basalt for use in Lost foam casting process. These
coatings have not been used in practice so far. The coating compositions and the synthesis process were studied. Test series of
casting aluminum alloy castings were made. Positive results of testing the surface, structure and properties of the obtained castings
are shown. The possibility of using basalt for the synthesis of coatings in foundry will enable great savings in the production of
castings. This is significant considering that Serbia has significant reserves of this type of mineral raw materials.
PB  - Užice : Akademija strukovnih studija "Zapadna Srbija", Odsek Užice
C3  - Conference Proceedings / 12th International Conference Science and Higher Education in Function of Sustainable Development - SED 2021, 8th October 2021, Užice, Serbia
T1  - SYNTHESIS OF NEW REFRACTORY COATINGS BASED ON BASALT FOR FOUNDRY APPLICATIONS
EP  - 26
SP  - 1
UR  - https://hdl.handle.net/21.15107/rcub_technorep_7061
ER  - 

@conference{
author = "Pavlović, Marko and Trumbulović, Ljiljana and Dojčinović, Marina and Čeganjac, Zoran",
year = "2021",
abstract = "This paper presents the results of research on coatings based on basalt for use in Lost foam casting process. These
coatings have not been used in practice so far. The coating compositions and the synthesis process were studied. Test series of
casting aluminum alloy castings were made. Positive results of testing the surface, structure and properties of the obtained castings
are shown. The possibility of using basalt for the synthesis of coatings in foundry will enable great savings in the production of
castings. This is significant considering that Serbia has significant reserves of this type of mineral raw materials.",
publisher = "Užice : Akademija strukovnih studija "Zapadna Srbija", Odsek Užice",
journal = "Conference Proceedings / 12th International Conference Science and Higher Education in Function of Sustainable Development - SED 2021, 8th October 2021, Užice, Serbia",
title = "SYNTHESIS OF NEW REFRACTORY COATINGS BASED ON BASALT FOR FOUNDRY APPLICATIONS",
pages = "26-1",
url = "https://hdl.handle.net/21.15107/rcub_technorep_7061"
}

Pavlović, M., Trumbulović, L., Dojčinović, M.,& Čeganjac, Z.. (2021). SYNTHESIS OF NEW REFRACTORY COATINGS BASED ON BASALT FOR FOUNDRY APPLICATIONS. in Conference Proceedings / 12th International Conference Science and Higher Education in Function of Sustainable Development - SED 2021, 8th October 2021, Užice, Serbia
Užice : Akademija strukovnih studija "Zapadna Srbija", Odsek Užice., 1-26.
https://hdl.handle.net/21.15107/rcub_technorep_7061

Pavlović M, Trumbulović L, Dojčinović M, Čeganjac Z. SYNTHESIS OF NEW REFRACTORY COATINGS BASED ON BASALT FOR FOUNDRY APPLICATIONS. in Conference Proceedings / 12th International Conference Science and Higher Education in Function of Sustainable Development - SED 2021, 8th October 2021, Užice, Serbia. 2021;:1-26.
https://hdl.handle.net/21.15107/rcub_technorep_7061 .

Pavlović, Marko, Trumbulović, Ljiljana, Dojčinović, Marina, Čeganjac, Zoran, "SYNTHESIS OF NEW REFRACTORY COATINGS BASED ON BASALT FOR FOUNDRY APPLICATIONS" in Conference Proceedings / 12th International Conference Science and Higher Education in Function of Sustainable Development - SED 2021, 8th October 2021, Užice, Serbia (2021):1-26,
https://hdl.handle.net/21.15107/rcub_technorep_7061 .

TY  - CONF
AU  - Andrić, Ljubiša
AU  - Dojčinović, Marina
AU  - Jezdimirović, Slađana
AU  - Purić, Branka
AU  - Pavlović, Marko
AU  - Cvetković, Aleksandar
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7058
AB  - Pirofilit je mineralna sirovina pogodna za izradu šireg spektra proizvoda i primenu u različitim granama privrede (građevinarstvu, poljoprivredi, industriji hartije). Tehnologija prerade stena pirofilita je ekološki čista, a proizvodi dobijeni tehnološkom preradom pirofilita nisu kancerogeni. 
U radu su ispitivani uzorci pirofilita sinterovani na temperaturi 1150 ºC. Polazni uzorak pirofilita  dobijen je iz ležišta Parsović-BiH. Eksperimentalno je određena otpornost ovog vatrostalnog uzorka na dejstvo kavitacije primenom ultrazvučne vibracione metode sa stacionarnim uzorkom prema standardu ASTM G32. Na osnovu vrednosti kavitacione brzine i analize morfologije oštećenja površine određena je otpornost na dejstvo kavitacije ispitivanog uzorka na bazi pirofilita i procenjena mogućnost njihove primene u hidrodinamičkim uslovima eksploatacije u kojima se očekuje pojava kavitacije.
AB  - Pyrophyllite is a mineral raw material suitable for the production of a wider range of products and application in various branches of the economy (construction, agriculture, paper industry). 
The technology of pyrophyllite rock processing is ecologically clean, and the products obtained by technological processing of pyrophyllite are not carcinogenic. The paper tested pyrophyllite sample sintered at temperaturi 1150 ºC. Initial sample of pyrophyllite were obtained from the Parsović-BiH deposit. The resistance of these refractory sample to the action of cavitation was determined experimentally using the ultrasonic vibration method with a stationary sample according to the ASTM G32 standard. Based on the value of cavitation velocity and analysis of surface damage morphology, the resistance to cavitation of these sample based on pyrophyllite was determined and the possibility of their application in hydrodynamic operating conditions in which cavitation is expected was asessed.
PB  - Zenica : Faculty of Mechanical Engineering
C3  - Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021
T1  - OCENA KVALITETA SINTEROVANOG PIROFILITA PRIMENOM METODE ISPITIVANJA KAVITACIONE OTPORNOSTI
T1  - QUALITY ASSESSMENT OF SINTERED PYROPHYLLITE USING THE METHOD OF CAVITATION RESISTANCE TESTING
EP  - 100
SP  - 95
UR  - https://hdl.handle.net/21.15107/rcub_technorep_7058
ER  - 

@conference{
author = "Andrić, Ljubiša and Dojčinović, Marina and Jezdimirović, Slađana and Purić, Branka and Pavlović, Marko and Cvetković, Aleksandar",
year = "2021",
abstract = "Pirofilit je mineralna sirovina pogodna za izradu šireg spektra proizvoda i primenu u različitim granama privrede (građevinarstvu, poljoprivredi, industriji hartije). Tehnologija prerade stena pirofilita je ekološki čista, a proizvodi dobijeni tehnološkom preradom pirofilita nisu kancerogeni. 
U radu su ispitivani uzorci pirofilita sinterovani na temperaturi 1150 ºC. Polazni uzorak pirofilita  dobijen je iz ležišta Parsović-BiH. Eksperimentalno je određena otpornost ovog vatrostalnog uzorka na dejstvo kavitacije primenom ultrazvučne vibracione metode sa stacionarnim uzorkom prema standardu ASTM G32. Na osnovu vrednosti kavitacione brzine i analize morfologije oštećenja površine određena je otpornost na dejstvo kavitacije ispitivanog uzorka na bazi pirofilita i procenjena mogućnost njihove primene u hidrodinamičkim uslovima eksploatacije u kojima se očekuje pojava kavitacije., Pyrophyllite is a mineral raw material suitable for the production of a wider range of products and application in various branches of the economy (construction, agriculture, paper industry). 
The technology of pyrophyllite rock processing is ecologically clean, and the products obtained by technological processing of pyrophyllite are not carcinogenic. The paper tested pyrophyllite sample sintered at temperaturi 1150 ºC. Initial sample of pyrophyllite were obtained from the Parsović-BiH deposit. The resistance of these refractory sample to the action of cavitation was determined experimentally using the ultrasonic vibration method with a stationary sample according to the ASTM G32 standard. Based on the value of cavitation velocity and analysis of surface damage morphology, the resistance to cavitation of these sample based on pyrophyllite was determined and the possibility of their application in hydrodynamic operating conditions in which cavitation is expected was asessed.",
publisher = "Zenica : Faculty of Mechanical Engineering",
journal = "Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021",
title = "OCENA KVALITETA SINTEROVANOG PIROFILITA PRIMENOM METODE ISPITIVANJA KAVITACIONE OTPORNOSTI, QUALITY ASSESSMENT OF SINTERED PYROPHYLLITE USING THE METHOD OF CAVITATION RESISTANCE TESTING",
pages = "100-95",
url = "https://hdl.handle.net/21.15107/rcub_technorep_7058"
}

Andrić, L., Dojčinović, M., Jezdimirović, S., Purić, B., Pavlović, M.,& Cvetković, A.. (2021). OCENA KVALITETA SINTEROVANOG PIROFILITA PRIMENOM METODE ISPITIVANJA KAVITACIONE OTPORNOSTI. in Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021
Zenica : Faculty of Mechanical Engineering., 95-100.
https://hdl.handle.net/21.15107/rcub_technorep_7058

Andrić L, Dojčinović M, Jezdimirović S, Purić B, Pavlović M, Cvetković A. OCENA KVALITETA SINTEROVANOG PIROFILITA PRIMENOM METODE ISPITIVANJA KAVITACIONE OTPORNOSTI. in Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021. 2021;:95-100.
https://hdl.handle.net/21.15107/rcub_technorep_7058 .

Andrić, Ljubiša, Dojčinović, Marina, Jezdimirović, Slađana, Purić, Branka, Pavlović, Marko, Cvetković, Aleksandar, "OCENA KVALITETA SINTEROVANOG PIROFILITA PRIMENOM METODE ISPITIVANJA KAVITACIONE OTPORNOSTI" in Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021 (2021):95-100,
https://hdl.handle.net/21.15107/rcub_technorep_7058 .

TY  - CONF
AU  - Dojčinović, Marina
AU  - Purić, Branka
AU  - Jezdimirović, Slađana
AU  - Kovačević, Andrej
AU  - Pavlović, Marko
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7059
AB  - U radu je analizirana morfologija kavitacionog oštećenja martenzitnog nerđajućeg čelika. Za ispitivanje otpornosti na dejstvo kavitacije, u laboratorijskim uslovima je primenjena ultrazvučna vibraciona metoda sa stacionarnim uzorkom. Praćenjem promene mase uzorka u funkciji vremena dejstva kavitacije određena je kavitaciona brzina čelika, kao mera otpornosti čelika na dejstvo kavitacije. Tokom ispitivanja primenjena je skenirajuća elektronska mikroskopija (SEM) koja je omogućila analizu morfologije kavitacionog oštećenja ovog materijala. Dobijeni rezultati ispitivanja pokazali su visoku otpornost martenzitnog nerđajućeg čelika na dejstvo kavitacije.
AB  - The morphology of cavitation damage of martensitic stainless steel was analyzed in this paper. Ultrasonic vibration method with a stationary sample was applied for cavitation resistance testing in laboratory conditions. By monitoring the change in the mass of the sample as a function of the time of cavitation action, the cavitation rate of steel was determined as a measure of the cavitation resistance of steel. During the examination, scanning electron microscopy (SEM) was applied, which enabled the analysis of the morphology of cavitation damage of this material. The obtained test results showed high cavitation resistance of martensitic stainless steel.
PB  - Zenica : Faculty of Mechanical Engineering
C3  - Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021
T1  - ANALIZA MORFOLOGIJE KAVITACIONOG OŠTEĆENJA MARTENZITNOG NERĐAJUĆEG ČELIKA
T1  - ANALYSIS OF CAVITATION DAMAGE MORPHOLOGY OF MARTENSITIC STAINLESS STEEL
EP  - 176
SP  - 171
UR  - https://hdl.handle.net/21.15107/rcub_technorep_7059
ER  - 

@conference{
author = "Dojčinović, Marina and Purić, Branka and Jezdimirović, Slađana and Kovačević, Andrej and Pavlović, Marko",
year = "2021",
abstract = "U radu je analizirana morfologija kavitacionog oštećenja martenzitnog nerđajućeg čelika. Za ispitivanje otpornosti na dejstvo kavitacije, u laboratorijskim uslovima je primenjena ultrazvučna vibraciona metoda sa stacionarnim uzorkom. Praćenjem promene mase uzorka u funkciji vremena dejstva kavitacije određena je kavitaciona brzina čelika, kao mera otpornosti čelika na dejstvo kavitacije. Tokom ispitivanja primenjena je skenirajuća elektronska mikroskopija (SEM) koja je omogućila analizu morfologije kavitacionog oštećenja ovog materijala. Dobijeni rezultati ispitivanja pokazali su visoku otpornost martenzitnog nerđajućeg čelika na dejstvo kavitacije., The morphology of cavitation damage of martensitic stainless steel was analyzed in this paper. Ultrasonic vibration method with a stationary sample was applied for cavitation resistance testing in laboratory conditions. By monitoring the change in the mass of the sample as a function of the time of cavitation action, the cavitation rate of steel was determined as a measure of the cavitation resistance of steel. During the examination, scanning electron microscopy (SEM) was applied, which enabled the analysis of the morphology of cavitation damage of this material. The obtained test results showed high cavitation resistance of martensitic stainless steel.",
publisher = "Zenica : Faculty of Mechanical Engineering",
journal = "Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021",
title = "ANALIZA MORFOLOGIJE KAVITACIONOG OŠTEĆENJA MARTENZITNOG NERĐAJUĆEG ČELIKA, ANALYSIS OF CAVITATION DAMAGE MORPHOLOGY OF MARTENSITIC STAINLESS STEEL",
pages = "176-171",
url = "https://hdl.handle.net/21.15107/rcub_technorep_7059"
}

Dojčinović, M., Purić, B., Jezdimirović, S., Kovačević, A.,& Pavlović, M.. (2021). ANALIZA MORFOLOGIJE KAVITACIONOG OŠTEĆENJA MARTENZITNOG NERĐAJUĆEG ČELIKA. in Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021
Zenica : Faculty of Mechanical Engineering., 171-176.
https://hdl.handle.net/21.15107/rcub_technorep_7059

Dojčinović M, Purić B, Jezdimirović S, Kovačević A, Pavlović M. ANALIZA MORFOLOGIJE KAVITACIONOG OŠTEĆENJA MARTENZITNOG NERĐAJUĆEG ČELIKA. in Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021. 2021;:171-176.
https://hdl.handle.net/21.15107/rcub_technorep_7059 .

Dojčinović, Marina, Purić, Branka, Jezdimirović, Slađana, Kovačević, Andrej, Pavlović, Marko, "ANALIZA MORFOLOGIJE KAVITACIONOG OŠTEĆENJA MARTENZITNOG NERĐAJUĆEG ČELIKA" in Quality 2021 : proceedings / 12th Research/expert Conference with international participation, Neum, Bosnia and Herzegovina, 16-19 June 2021 (2021):171-176,
https://hdl.handle.net/21.15107/rcub_technorep_7059 .

TY  - JOUR
AU  - Andrić, Ljubiša
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Radulović, Dragan
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5625
AB  - U radu je ispitivana otpornost pod dejstvom kavitacije uzoraka sinterovanog pirofilita. Polazni
uzorak pirofilita iz ležišta Parsović- BiH mleven je u vibracionom mlinu na granulaciju 20μm,
presovan je i sinterovan na temperaturama (ºC): 1000; 1100; 1200. Za procenu kavitacione
otpornosti praćena je promena mase uzorka u funkciji vremena delovanja kavitacije. Primenjena je
ultrazvučna vibraciona metoda sa stacionarnim uzorkom prema standardu ASTM G32. Izračunate
su kavitacione brzine za sve uzorke, kao osnovni pokazatelj otpornosti materijala pod dejstvom
kavitacije. Promena morfologije površine uzorka sa vremenom ispitivanja praćena je primenom
skenirajuće elektronske mikroskopije. Na osnovu vrednosti kavitacione brzine i analize morfologije
oštećenja površine određena je kavitaciona otpornost ispitivanih uzoraka na bazi pirofilita. Dobijeni
rezultati ukazuju da uzorci sinterovanog pirofilita imaju zadovoljavajuću otpornost na dejstvo
kavitacije i mogu se primeniti u uslovima manjih kavitacionih opterećenja.
AB  - The resistance under the action of cavitation of sintered pyrophillite samples was investigated. The initial sample of pyrophillite from the Parsovic-BiH deposit was ground a vibrating mill to a granulation of 20 mμ, pressed and sintered at temperatures (⁰C): 100; 1100; 1200. To assess cavitation resistance, the change in sample mass as a function of cavitation time was monitored. The cavitation erosion test was performed using the ultrasonic vibratory cavitation test method according to the ASTM G-32 standard. Cavitation velocites were calculated for all samples, as a basic indicator of the resistance of the material under the action of cavitation. The change in the morphology of the surface with the test time was followed by scanning electron microscopy. Based on the values of cavitation velocity and analysis of the surface damage morphology, the cavitation resistance of the tested samples based on pyrophillite was determined. The obtained results indicate that the samples of sintered pyrophillite have satisfactory resistance to the action of cavitation and be applied in conditions of lower cavitation loads.
PB  - Inženjersko društvo za koroziju
T2  - Zaštita materijala
T1  - Određivanje otpornosti na dejstvo kavitacije uzoraka pirofilita
T1  - Determination of resistance to cavitation of pyrophyllite samples
EP  - 134
IS  - 2
SP  - 126
VL  - 62
DO  - 10.5937/zasmat2102126A
ER  - 

@article{
author = "Andrić, Ljubiša and Pavlović, Marko and Dojčinović, Marina and Radulović, Dragan",
year = "2021",
abstract = "U radu je ispitivana otpornost pod dejstvom kavitacije uzoraka sinterovanog pirofilita. Polazni
uzorak pirofilita iz ležišta Parsović- BiH mleven je u vibracionom mlinu na granulaciju 20μm,
presovan je i sinterovan na temperaturama (ºC): 1000; 1100; 1200. Za procenu kavitacione
otpornosti praćena je promena mase uzorka u funkciji vremena delovanja kavitacije. Primenjena je
ultrazvučna vibraciona metoda sa stacionarnim uzorkom prema standardu ASTM G32. Izračunate
su kavitacione brzine za sve uzorke, kao osnovni pokazatelj otpornosti materijala pod dejstvom
kavitacije. Promena morfologije površine uzorka sa vremenom ispitivanja praćena je primenom
skenirajuće elektronske mikroskopije. Na osnovu vrednosti kavitacione brzine i analize morfologije
oštećenja površine određena je kavitaciona otpornost ispitivanih uzoraka na bazi pirofilita. Dobijeni
rezultati ukazuju da uzorci sinterovanog pirofilita imaju zadovoljavajuću otpornost na dejstvo
kavitacije i mogu se primeniti u uslovima manjih kavitacionih opterećenja., The resistance under the action of cavitation of sintered pyrophillite samples was investigated. The initial sample of pyrophillite from the Parsovic-BiH deposit was ground a vibrating mill to a granulation of 20 mμ, pressed and sintered at temperatures (⁰C): 100; 1100; 1200. To assess cavitation resistance, the change in sample mass as a function of cavitation time was monitored. The cavitation erosion test was performed using the ultrasonic vibratory cavitation test method according to the ASTM G-32 standard. Cavitation velocites were calculated for all samples, as a basic indicator of the resistance of the material under the action of cavitation. The change in the morphology of the surface with the test time was followed by scanning electron microscopy. Based on the values of cavitation velocity and analysis of the surface damage morphology, the cavitation resistance of the tested samples based on pyrophillite was determined. The obtained results indicate that the samples of sintered pyrophillite have satisfactory resistance to the action of cavitation and be applied in conditions of lower cavitation loads.",
publisher = "Inženjersko društvo za koroziju",
journal = "Zaštita materijala",
title = "Određivanje otpornosti na dejstvo kavitacije uzoraka pirofilita, Determination of resistance to cavitation of pyrophyllite samples",
pages = "134-126",
number = "2",
volume = "62",
doi = "10.5937/zasmat2102126A"
}

Andrić, L., Pavlović, M., Dojčinović, M.,& Radulović, D.. (2021). Određivanje otpornosti na dejstvo kavitacije uzoraka pirofilita. in Zaštita materijala
Inženjersko društvo za koroziju., 62(2), 126-134.
https://doi.org/10.5937/zasmat2102126A

Andrić L, Pavlović M, Dojčinović M, Radulović D. Određivanje otpornosti na dejstvo kavitacije uzoraka pirofilita. in Zaštita materijala. 2021;62(2):126-134.
doi:10.5937/zasmat2102126A .

Andrić, Ljubiša, Pavlović, Marko, Dojčinović, Marina, Radulović, Dragan, "Određivanje otpornosti na dejstvo kavitacije uzoraka pirofilita" in Zaštita materijala, 62, no. 2 (2021):126-134,
https://doi.org/10.5937/zasmat2102126A . .

Prokić-Cvetković, R., Dojčinović, M., Pavlović, M., Andrić, L., Petrov, M.,& Radulović, D.. (2020). Sinteza i karakterizacija sinterovanog bazalta sa poboljšanom otpornošću na dejstvo kavitacije. .
https://hdl.handle.net/21.15107/rcub_technorep_7031

Prokić-Cvetković R, Dojčinović M, Pavlović M, Andrić L, Petrov M, Radulović D. Sinteza i karakterizacija sinterovanog bazalta sa poboljšanom otpornošću na dejstvo kavitacije. 2020;.
https://hdl.handle.net/21.15107/rcub_technorep_7031 .

Prokić-Cvetković, Radica, Dojčinović, Marina, Pavlović, Marko, Andrić, Ljubiša, Petrov, Milan, Radulović, Dragan, "Sinteza i karakterizacija sinterovanog bazalta sa poboljšanom otpornošću na dejstvo kavitacije" (2020),
https://hdl.handle.net/21.15107/rcub_technorep_7031 .

TY  - JOUR
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Prokić-Cvetković, Radica
AU  - Andrić, Ljubiša
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4207
AB  - The paper presents the results of research on cavitation resistance of the composite based on unsaturated polyester resin and basalt powder, as reinforcement. Basalt powder was obtained by grinding and micronising basaltic rocks from the Vrelo-Kopaonik deposit. Different amounts of basalt powder as reinforcement were applied (g): 0.15; 0.30; 045; 0,50. The mechanical properties (tensile strength, bending strength, hardness) and cavitation resistance properties were determined for the resulting composite. An ultrasonic vibration method (with stationary specimen) was applied according to ASTM G32 standard. Studies have shown that the mechanical properties and cavitation resistance of the composites increase with the addition of basalt powder as reinforcement.
PB  - Society for Structural Integrity and Life, Institute for Material Testing
T2  - Structural Integrity and Life
T1  - Cavitation resistance of composite polyester resin/basalt powder
EP  - 22
IS  - 1
SP  - 19
VL  - 19
UR  - https://hdl.handle.net/21.15107/rcub_technorep_4207
ER  - 

@article{
author = "Pavlović, Marko and Dojčinović, Marina and Prokić-Cvetković, Radica and Andrić, Ljubiša",
year = "2019",
abstract = "The paper presents the results of research on cavitation resistance of the composite based on unsaturated polyester resin and basalt powder, as reinforcement. Basalt powder was obtained by grinding and micronising basaltic rocks from the Vrelo-Kopaonik deposit. Different amounts of basalt powder as reinforcement were applied (g): 0.15; 0.30; 045; 0,50. The mechanical properties (tensile strength, bending strength, hardness) and cavitation resistance properties were determined for the resulting composite. An ultrasonic vibration method (with stationary specimen) was applied according to ASTM G32 standard. Studies have shown that the mechanical properties and cavitation resistance of the composites increase with the addition of basalt powder as reinforcement.",
publisher = "Society for Structural Integrity and Life, Institute for Material Testing",
journal = "Structural Integrity and Life",
title = "Cavitation resistance of composite polyester resin/basalt powder",
pages = "22-19",
number = "1",
volume = "19",
url = "https://hdl.handle.net/21.15107/rcub_technorep_4207"
}

Pavlović, M., Dojčinović, M., Prokić-Cvetković, R.,& Andrić, L.. (2019). Cavitation resistance of composite polyester resin/basalt powder. in Structural Integrity and Life
Society for Structural Integrity and Life, Institute for Material Testing., 19(1), 19-22.
https://hdl.handle.net/21.15107/rcub_technorep_4207

Pavlović M, Dojčinović M, Prokić-Cvetković R, Andrić L. Cavitation resistance of composite polyester resin/basalt powder. in Structural Integrity and Life. 2019;19(1):19-22.
https://hdl.handle.net/21.15107/rcub_technorep_4207 .

Pavlović, Marko, Dojčinović, Marina, Prokić-Cvetković, Radica, Andrić, Ljubiša, "Cavitation resistance of composite polyester resin/basalt powder" in Structural Integrity and Life, 19, no. 1 (2019):19-22,
https://hdl.handle.net/21.15107/rcub_technorep_4207 .

TY  - JOUR
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Prokić-Cvetković, Radica
AU  - Andrić, Ljubiša
AU  - Ceganjac, Zoran
AU  - Trumbulović, Ljiljana
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4219
AB  - This paper examines the possibility of using basalt-based glass ceramics for construction of structural parts of equipment in metallurgy and mining. An ultrasonic vibration method with a stationary sample pursuant to the ASTM G32 standard was used to evaluate the possibility of the glass ceramic samples application in such operating conditions. As the starting material for synthesis of samples, olivine-pyroxene basalt from the locality Vrelo-Kopaonik Mountain (Serbia) was used. In order to obtain pre-determined structure and properties of basalt-based glass ceramics, raw material preparation methods through the sample crushing, grinding, and mechanical activation processes have been examined together with sample synthesis by means of melting, casting, and thermal treatment applied for the samples concerned. The mass loss of samples in function of the cavitation time was monitored. Sample surface degradation level was quantified using the image analysis. During the test, changes in sample morphology were monitored by means of the scanning electronic microscopy method. The results showed that basalt-based glass ceramics are highly resistant to cavitation wear and can be used in similar exploitation conditions as a substitute for other metal materials.
PB  - MDPI, Basel
T2  - Materials
T1  - Cavitation Wear of Basalt-Based Glass Ceramic
IS  - 9
VL  - 12
DO  - 10.3390/ma12091552
ER  - 

@article{
author = "Pavlović, Marko and Dojčinović, Marina and Prokić-Cvetković, Radica and Andrić, Ljubiša and Ceganjac, Zoran and Trumbulović, Ljiljana",
year = "2019",
abstract = "This paper examines the possibility of using basalt-based glass ceramics for construction of structural parts of equipment in metallurgy and mining. An ultrasonic vibration method with a stationary sample pursuant to the ASTM G32 standard was used to evaluate the possibility of the glass ceramic samples application in such operating conditions. As the starting material for synthesis of samples, olivine-pyroxene basalt from the locality Vrelo-Kopaonik Mountain (Serbia) was used. In order to obtain pre-determined structure and properties of basalt-based glass ceramics, raw material preparation methods through the sample crushing, grinding, and mechanical activation processes have been examined together with sample synthesis by means of melting, casting, and thermal treatment applied for the samples concerned. The mass loss of samples in function of the cavitation time was monitored. Sample surface degradation level was quantified using the image analysis. During the test, changes in sample morphology were monitored by means of the scanning electronic microscopy method. The results showed that basalt-based glass ceramics are highly resistant to cavitation wear and can be used in similar exploitation conditions as a substitute for other metal materials.",
publisher = "MDPI, Basel",
journal = "Materials",
title = "Cavitation Wear of Basalt-Based Glass Ceramic",
number = "9",
volume = "12",
doi = "10.3390/ma12091552"
}

Pavlović, M., Dojčinović, M., Prokić-Cvetković, R., Andrić, L., Ceganjac, Z.,& Trumbulović, L.. (2019). Cavitation Wear of Basalt-Based Glass Ceramic. in Materials
MDPI, Basel., 12(9).
https://doi.org/10.3390/ma12091552

Pavlović M, Dojčinović M, Prokić-Cvetković R, Andrić L, Ceganjac Z, Trumbulović L. Cavitation Wear of Basalt-Based Glass Ceramic. in Materials. 2019;12(9).
doi:10.3390/ma12091552 .

Pavlović, Marko, Dojčinović, Marina, Prokić-Cvetković, Radica, Andrić, Ljubiša, Ceganjac, Zoran, Trumbulović, Ljiljana, "Cavitation Wear of Basalt-Based Glass Ceramic" in Materials, 12, no. 9 (2019),
https://doi.org/10.3390/ma12091552 . .

TY  - JOUR
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Prokić-Cvetković, Radica
AU  - Andrić, Ljubiša
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4274
AB  - The paper examines the cavitation resistance of the cast basalt samples. Samples were obtained by melting, casting and thermal treatment of crushed basalt rocks from the Vrelo Kopaonik deposit. The experiment was conducted using an ultrasonic vibration method with a stationary sample according to the ASTM G-32 standard. To estimation the cavitation resistance, a change in the mass of the samples in the function of the cavitation time has been observed. The formation and development of damage under the effect of cavitation was monitored by an electron microscope, and the level of degradation of the sample surface was quantified using the image analysis. The results showed a high degree of cavitation resistance of cast basalt samples, with a cavitation rate of 0.0294 mg/min. This indicates the possibility of their application for the production of particular structural parts of equipment for use in metallurgy, as a substitute for metallic materials.
AB  - U radu je ispitivana otpornost na dejstvo kavitacije uzoraka livenog bazalta. Uzorci su dobijeni topljenjem, livenjem i termičkim tretmanom izdrobljenih bazaltnih stena iz ležišta Vrelo Kopaonik. Eksperiment je vođen primenom ultrazvučne vibracione metode sa stacionarnim uzorkom prema standardu ASTM G-32. Za procenu otpornosti na dejstvo kavitacije praćena je promena mase uzoraka u funkciji vremena delovanja kavitacije. Nastajanje i razvoj oštećenja pod dejstvom kavitacije praćeni su skening elektronskim mikroskopom, a nivo degradacije površine uzoraka kvantifikovan je primenom analize slike. Rezultati su pokazali visok stepen otpornosti na dejstvo kavitacije uzoraka livenog bazalta, sa kavitacionom brzinom 0,0294 mg/min. To ukazuje na mogućnost njihove primene za izradu izvesnih konstrukcionih delova opreme za primenu u metalurgiji, kao zamena za metalne materijale.
PB  - Engineering Society for Corrosion, Belgrade, Serbia
T2  - Zaštita materijala
T1  - Formation and development of damage of basalt under the effect of cavitation
T1  - Nastajanje i razvoj oštećenja bazalta pod dejstvom kavitacije
EP  - 189
IS  - 2
SP  - 182
VL  - 60
DO  - 10.5937/zasmat1902182P
ER  - 

@article{
author = "Pavlović, Marko and Dojčinović, Marina and Prokić-Cvetković, Radica and Andrić, Ljubiša",
year = "2019",
abstract = "The paper examines the cavitation resistance of the cast basalt samples. Samples were obtained by melting, casting and thermal treatment of crushed basalt rocks from the Vrelo Kopaonik deposit. The experiment was conducted using an ultrasonic vibration method with a stationary sample according to the ASTM G-32 standard. To estimation the cavitation resistance, a change in the mass of the samples in the function of the cavitation time has been observed. The formation and development of damage under the effect of cavitation was monitored by an electron microscope, and the level of degradation of the sample surface was quantified using the image analysis. The results showed a high degree of cavitation resistance of cast basalt samples, with a cavitation rate of 0.0294 mg/min. This indicates the possibility of their application for the production of particular structural parts of equipment for use in metallurgy, as a substitute for metallic materials., U radu je ispitivana otpornost na dejstvo kavitacije uzoraka livenog bazalta. Uzorci su dobijeni topljenjem, livenjem i termičkim tretmanom izdrobljenih bazaltnih stena iz ležišta Vrelo Kopaonik. Eksperiment je vođen primenom ultrazvučne vibracione metode sa stacionarnim uzorkom prema standardu ASTM G-32. Za procenu otpornosti na dejstvo kavitacije praćena je promena mase uzoraka u funkciji vremena delovanja kavitacije. Nastajanje i razvoj oštećenja pod dejstvom kavitacije praćeni su skening elektronskim mikroskopom, a nivo degradacije površine uzoraka kvantifikovan je primenom analize slike. Rezultati su pokazali visok stepen otpornosti na dejstvo kavitacije uzoraka livenog bazalta, sa kavitacionom brzinom 0,0294 mg/min. To ukazuje na mogućnost njihove primene za izradu izvesnih konstrukcionih delova opreme za primenu u metalurgiji, kao zamena za metalne materijale.",
publisher = "Engineering Society for Corrosion, Belgrade, Serbia",
journal = "Zaštita materijala",
title = "Formation and development of damage of basalt under the effect of cavitation, Nastajanje i razvoj oštećenja bazalta pod dejstvom kavitacije",
pages = "189-182",
number = "2",
volume = "60",
doi = "10.5937/zasmat1902182P"
}

Pavlović, M., Dojčinović, M., Prokić-Cvetković, R.,& Andrić, L.. (2019). Formation and development of damage of basalt under the effect of cavitation. in Zaštita materijala
Engineering Society for Corrosion, Belgrade, Serbia., 60(2), 182-189.
https://doi.org/10.5937/zasmat1902182P

Pavlović M, Dojčinović M, Prokić-Cvetković R, Andrić L. Formation and development of damage of basalt under the effect of cavitation. in Zaštita materijala. 2019;60(2):182-189.
doi:10.5937/zasmat1902182P .

Pavlović, Marko, Dojčinović, Marina, Prokić-Cvetković, Radica, Andrić, Ljubiša, "Formation and development of damage of basalt under the effect of cavitation" in Zaštita materijala, 60, no. 2 (2019):182-189,
https://doi.org/10.5937/zasmat1902182P . .

TY  - JOUR
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Prokić-Cvetković, Radica
AU  - Andrić, Ljubiša
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4304
AB  - The paper analyzes the morphology of cavitation damage of raw and sintered basalt samples. The experiment was conducted using the ultrasonic vibratory cavitation test method according to the ASTM G-32 standard. During the determination of the resistance to the effect of cavitation, a change in the mass of samples was observed in the function of the cavitation time of operation. The morphology of damage caused by the effect of cavitation was followed by scanning with an electron microscope, and the level of degradation of the surface of the samples was quantified using the image analysis. The results showed a significantly higher degree of resistance of sintered basalt, with a cavitation rate of 0.019 mg/min relative to raw basalt, with a cavitation rate of 0.738 mg/min. After 120 minutes of exposure to the cavitation effect, a smaller number of small pits on the surface of sintered basalt were observed, while a higher level of damage to the surface with the appearance of numerous pits was found in raw basalt, which can be connected in some places to larger and deeper pits in some places. The obtained results indicate the possibility of using sintered basalt for the production of parts that will be exposed to the effects of high cavitation loads.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - The Mechanisms of Cavitation Erosion of Raw and Sintered Basalt
EP  - 419
IS  - 4
SP  - 409
VL  - 51
DO  - 10.2298/SOS1904409P
ER  - 

@article{
author = "Pavlović, Marko and Dojčinović, Marina and Prokić-Cvetković, Radica and Andrić, Ljubiša",
year = "2019",
abstract = "The paper analyzes the morphology of cavitation damage of raw and sintered basalt samples. The experiment was conducted using the ultrasonic vibratory cavitation test method according to the ASTM G-32 standard. During the determination of the resistance to the effect of cavitation, a change in the mass of samples was observed in the function of the cavitation time of operation. The morphology of damage caused by the effect of cavitation was followed by scanning with an electron microscope, and the level of degradation of the surface of the samples was quantified using the image analysis. The results showed a significantly higher degree of resistance of sintered basalt, with a cavitation rate of 0.019 mg/min relative to raw basalt, with a cavitation rate of 0.738 mg/min. After 120 minutes of exposure to the cavitation effect, a smaller number of small pits on the surface of sintered basalt were observed, while a higher level of damage to the surface with the appearance of numerous pits was found in raw basalt, which can be connected in some places to larger and deeper pits in some places. The obtained results indicate the possibility of using sintered basalt for the production of parts that will be exposed to the effects of high cavitation loads.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "The Mechanisms of Cavitation Erosion of Raw and Sintered Basalt",
pages = "419-409",
number = "4",
volume = "51",
doi = "10.2298/SOS1904409P"
}

Pavlović, M., Dojčinović, M., Prokić-Cvetković, R.,& Andrić, L.. (2019). The Mechanisms of Cavitation Erosion of Raw and Sintered Basalt. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 51(4), 409-419.
https://doi.org/10.2298/SOS1904409P

Pavlović M, Dojčinović M, Prokić-Cvetković R, Andrić L. The Mechanisms of Cavitation Erosion of Raw and Sintered Basalt. in Science of Sintering. 2019;51(4):409-419.
doi:10.2298/SOS1904409P .

Pavlović, Marko, Dojčinović, Marina, Prokić-Cvetković, Radica, Andrić, Ljubiša, "The Mechanisms of Cavitation Erosion of Raw and Sintered Basalt" in Science of Sintering, 51, no. 4 (2019):409-419,
https://doi.org/10.2298/SOS1904409P . .

TY  - JOUR
AU  - Pavlović, Marko
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Drmanić, Saša
AU  - Đorđević, Nataša
AU  - Petrov, Milan
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4143
AB  - For the development of the Lost Foam refractory coatings with controlled rheologic properties, the influence of the mechanical activation process on the cordierite-based filler's properties change was examined. First of all, the test referred to the change offiller particles' size and shape, as well as to dispersion ability and stability of the coating suspension. Cordierite was obtained by synthesis in a solid state, out of the mass consisting of kaoline, alumina, quartz, sepiolite. For characterization purposes, the following methods were used: X-ray diffraction, differential thermal analysis, SEM and optical microscopy. Mechanical activation of filler was performed in a vibrating mill. The upper boundary of the grain size was 100% -30 x 10-6 m, the times were (min): 15; 30; 60. The new composition of Lost foam refractory coatings has been developed with a change of the coating production process, as well. These newly synthesized coatings proved to be effective in terms of a positive influence on a surface quality, structural and mechanical properties of aluminium castings. Test results may be useful to have the Lost Foam refractory coatings specified together with other process parameters used for the production of castings according to this casting method.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings
EP  - 25
IS  - 1
SP  - 15
VL  - 51
DO  - 10.2298/SOS1901015P
ER  - 

@article{
author = "Pavlović, Marko and Andrić, Ljubiša and Radulović, Dragan and Drmanić, Saša and Đorđević, Nataša and Petrov, Milan",
year = "2019",
abstract = "For the development of the Lost Foam refractory coatings with controlled rheologic properties, the influence of the mechanical activation process on the cordierite-based filler's properties change was examined. First of all, the test referred to the change offiller particles' size and shape, as well as to dispersion ability and stability of the coating suspension. Cordierite was obtained by synthesis in a solid state, out of the mass consisting of kaoline, alumina, quartz, sepiolite. For characterization purposes, the following methods were used: X-ray diffraction, differential thermal analysis, SEM and optical microscopy. Mechanical activation of filler was performed in a vibrating mill. The upper boundary of the grain size was 100% -30 x 10-6 m, the times were (min): 15; 30; 60. The new composition of Lost foam refractory coatings has been developed with a change of the coating production process, as well. These newly synthesized coatings proved to be effective in terms of a positive influence on a surface quality, structural and mechanical properties of aluminium castings. Test results may be useful to have the Lost Foam refractory coatings specified together with other process parameters used for the production of castings according to this casting method.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings",
pages = "25-15",
number = "1",
volume = "51",
doi = "10.2298/SOS1901015P"
}

Pavlović, M., Andrić, L., Radulović, D., Drmanić, S., Đorđević, N.,& Petrov, M.. (2019). Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 51(1), 15-25.
https://doi.org/10.2298/SOS1901015P

Pavlović M, Andrić L, Radulović D, Drmanić S, Đorđević N, Petrov M. Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings. in Science of Sintering. 2019;51(1):15-25.
doi:10.2298/SOS1901015P .

Pavlović, Marko, Andrić, Ljubiša, Radulović, Dragan, Drmanić, Saša, Đorđević, Nataša, Petrov, Milan, "Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings" in Science of Sintering, 51, no. 1 (2019):15-25,
https://doi.org/10.2298/SOS1901015P . .

TY  - JOUR
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Dojčinović, Marina
AU  - Pavlović, Marko
AU  - Volkov-Husović, Tatjana
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3966
AB  - In this study the resistance of cordierite and zircon to the cavitation erosion was investigated with the aim of possible spreading their application. Cavitation erosion test was applied using standard ultrasonic vibratory set up with stationary sample. Weight loss and image analysis measurements including morphological analysis of the formed pits were used for monitoring degradation during the cavitation erosion testing. The obtained results were discussed in order to compare and analyze degradation mechanism and the resistance of the investigated materials to cavitation erosion. Cordierite sample underwent less serious degradation, characterized by continual forming of new pits, while zircon degradation progressed by growth and merging of already formed pits.
PB  - Elsevier Science Bv, Amsterdam
T2  - Materials Letters
T1  - Comparison of cavitation erosion behavior of cordierite and zircon based samples using image and morphological analyses
EP  - 139
SP  - 136
VL  - 220
DO  - 10.1016/j.matlet.2018.03.029
ER  - 

@article{
author = "Martinović, Sanja and Vlahović, Milica and Dojčinović, Marina and Pavlović, Marko and Volkov-Husović, Tatjana",
year = "2018",
abstract = "In this study the resistance of cordierite and zircon to the cavitation erosion was investigated with the aim of possible spreading their application. Cavitation erosion test was applied using standard ultrasonic vibratory set up with stationary sample. Weight loss and image analysis measurements including morphological analysis of the formed pits were used for monitoring degradation during the cavitation erosion testing. The obtained results were discussed in order to compare and analyze degradation mechanism and the resistance of the investigated materials to cavitation erosion. Cordierite sample underwent less serious degradation, characterized by continual forming of new pits, while zircon degradation progressed by growth and merging of already formed pits.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Materials Letters",
title = "Comparison of cavitation erosion behavior of cordierite and zircon based samples using image and morphological analyses",
pages = "139-136",
volume = "220",
doi = "10.1016/j.matlet.2018.03.029"
}

Martinović, S., Vlahović, M., Dojčinović, M., Pavlović, M.,& Volkov-Husović, T.. (2018). Comparison of cavitation erosion behavior of cordierite and zircon based samples using image and morphological analyses. in Materials Letters
Elsevier Science Bv, Amsterdam., 220, 136-139.
https://doi.org/10.1016/j.matlet.2018.03.029

Martinović S, Vlahović M, Dojčinović M, Pavlović M, Volkov-Husović T. Comparison of cavitation erosion behavior of cordierite and zircon based samples using image and morphological analyses. in Materials Letters. 2018;220:136-139.
doi:10.1016/j.matlet.2018.03.029 .

Martinović, Sanja, Vlahović, Milica, Dojčinović, Marina, Pavlović, Marko, Volkov-Husović, Tatjana, "Comparison of cavitation erosion behavior of cordierite and zircon based samples using image and morphological analyses" in Materials Letters, 220 (2018):136-139,
https://doi.org/10.1016/j.matlet.2018.03.029 . .

TY  - JOUR
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov-Husović, Tatjana
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3280
AB  - Coating materials are widely used in refractory lining to prevent different deleterious effects such are reactions on the mold-metal contact surface, abrasion from liquid metal or alloy, gasses, slags, and other materials in contact with the coating. In this paper, behavior of cordierite based coating exposed to the cavitation erosion was investigated. Cordierite samples sintered at 1200 and 1400 degrees C were used for the tests. Mass loss, level of surface degradation obtained using image analysis and thermal imaging analysis were applied for the cavitation erosion evaluation. Results showed that the cordierite samples can be successfully used in conditions where the cavitation resistance is required.
PB  - Elsevier Sci Ltd, Oxford
T2  - Composites Part B-Engineering
T1  - Non destructive monitoring of cavitation erosion of cordierite based coatings
EP  - 91
SP  - 84
VL  - 97
DO  - 10.1016/j.compositesb.2016.04.073
ER  - 

@article{
author = "Pavlović, Marko and Dojčinović, Marina and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov-Husović, Tatjana",
year = "2016",
abstract = "Coating materials are widely used in refractory lining to prevent different deleterious effects such are reactions on the mold-metal contact surface, abrasion from liquid metal or alloy, gasses, slags, and other materials in contact with the coating. In this paper, behavior of cordierite based coating exposed to the cavitation erosion was investigated. Cordierite samples sintered at 1200 and 1400 degrees C were used for the tests. Mass loss, level of surface degradation obtained using image analysis and thermal imaging analysis were applied for the cavitation erosion evaluation. Results showed that the cordierite samples can be successfully used in conditions where the cavitation resistance is required.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Composites Part B-Engineering",
title = "Non destructive monitoring of cavitation erosion of cordierite based coatings",
pages = "91-84",
volume = "97",
doi = "10.1016/j.compositesb.2016.04.073"
}

Pavlović, M., Dojčinović, M., Martinović, S., Vlahović, M., Stević, Z.,& Volkov-Husović, T.. (2016). Non destructive monitoring of cavitation erosion of cordierite based coatings. in Composites Part B-Engineering
Elsevier Sci Ltd, Oxford., 97, 84-91.
https://doi.org/10.1016/j.compositesb.2016.04.073

Pavlović M, Dojčinović M, Martinović S, Vlahović M, Stević Z, Volkov-Husović T. Non destructive monitoring of cavitation erosion of cordierite based coatings. in Composites Part B-Engineering. 2016;97:84-91.
doi:10.1016/j.compositesb.2016.04.073 .

Pavlović, Marko, Dojčinović, Marina, Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov-Husović, Tatjana, "Non destructive monitoring of cavitation erosion of cordierite based coatings" in Composites Part B-Engineering, 97 (2016):84-91,
https://doi.org/10.1016/j.compositesb.2016.04.073 . .

TY  - JOUR
AU  - Aćimović-Pavlović, Zagorka
AU  - Terzić, Anja
AU  - Andrić, Ljubiša
AU  - Pavlović, Marko
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5755
AB  - This study presents the results of an investigation of high-temperature materials refractory coatings based on different refractory fillers including talc, cordierite, zircon and mullite applied in the lost-foam casting process. Design and optimization of a coating composition with controlled rheological properties and synthesis were achieved by applying different coating components, suspension agents and fillers and by altering the coating-production procedure. A morphological and microstructural analysis of the fillers was carried out with scanning electron microscopy. An X-ray diffraction analysis was applied to determine and monitor the phase-composition changes of the refractory fillers. The particle size and shape were assessed with the PC software application package OZARIA 2.5. To assess the effects of the applications of individual refractory coatings, a detailed investigation of the structural and mechanical properties of the mouldings obtained was performed. Highlight was placed on revealing and analyzing surface and volume defects present on the mouldings. Radiographic moulding tests were carried out with an X-ray device, SAIFORT type-S200. The attained results are essential for the synthesis of the refractory coatings based on high-temperature fillers and their applications in the lost-foam casting process for manufacturing the mouldings with in-advance-set properties.
PB  - Inst Za Kovinske Materiale I In Tehnologie, Ljubjana
T2  - Materiali in tehnologije
T1  - Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting
EP  - 164
IS  - 1
SP  - 157
VL  - 49
UR  - https://hdl.handle.net/21.15107/rcub_rims_277
ER  - 

@article{
author = "Aćimović-Pavlović, Zagorka and Terzić, Anja and Andrić, Ljubiša and Pavlović, Marko",
year = "2015",
abstract = "This study presents the results of an investigation of high-temperature materials refractory coatings based on different refractory fillers including talc, cordierite, zircon and mullite applied in the lost-foam casting process. Design and optimization of a coating composition with controlled rheological properties and synthesis were achieved by applying different coating components, suspension agents and fillers and by altering the coating-production procedure. A morphological and microstructural analysis of the fillers was carried out with scanning electron microscopy. An X-ray diffraction analysis was applied to determine and monitor the phase-composition changes of the refractory fillers. The particle size and shape were assessed with the PC software application package OZARIA 2.5. To assess the effects of the applications of individual refractory coatings, a detailed investigation of the structural and mechanical properties of the mouldings obtained was performed. Highlight was placed on revealing and analyzing surface and volume defects present on the mouldings. Radiographic moulding tests were carried out with an X-ray device, SAIFORT type-S200. The attained results are essential for the synthesis of the refractory coatings based on high-temperature fillers and their applications in the lost-foam casting process for manufacturing the mouldings with in-advance-set properties.",
publisher = "Inst Za Kovinske Materiale I In Tehnologie, Ljubjana",
journal = "Materiali in tehnologije",
title = "Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting",
pages = "164-157",
number = "1",
volume = "49",
url = "https://hdl.handle.net/21.15107/rcub_rims_277"
}

Aćimović-Pavlović, Z., Terzić, A., Andrić, L.,& Pavlović, M.. (2015). Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting. in Materiali in tehnologije
Inst Za Kovinske Materiale I In Tehnologie, Ljubjana., 49(1), 157-164.
https://hdl.handle.net/21.15107/rcub_rims_277

Aćimović-Pavlović Z, Terzić A, Andrić L, Pavlović M. Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting. in Materiali in tehnologije. 2015;49(1):157-164.
https://hdl.handle.net/21.15107/rcub_rims_277 .

Aćimović-Pavlović, Zagorka, Terzić, Anja, Andrić, Ljubiša, Pavlović, Marko, "Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting" in Materiali in tehnologije, 49, no. 1 (2015):157-164,
https://hdl.handle.net/21.15107/rcub_rims_277 .

TY  - JOUR
AU  - Aćimović, Zagorka
AU  - Terzić, Anja
AU  - Andrić, Ljubiša
AU  - Pavlović, Ljubica
AU  - Pavlović, Marko
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5717
AB  - Various possibilities for developing new mullite-based refractory linings that can be applied in a casting process were investigated and are presented in this paper. An optimization of the refractory-lining composition design with the controlled rheological properties was achieved by applying different lining components and altering the lining-production procedure. Mullite was used as a high-temperature filler. A mullite sample was tested with the following methods: X-ray diffraction analysis, differential thermal analysis and scanning-electron microscopy. The particle shape and particle size were analyzed with the program package for an image analysis called OZARIA 2.5. It was proved that an application of this type of lining has a positive effect on the surface quality, structural and mechanical properties of the castings of Fe-C alloys obtained by casting into sand molds, according to the method of expandable patterns (the EPC casting process).
PB  - Inst Za Kovinske Materiale I In Tehnologie, Ljubjana
T2  - Materiali in tehnologije
T1  - Synthesizing a new type of mullite lining
EP  - 780
IS  - 6
SP  - 777
VL  - 47
UR  - https://hdl.handle.net/21.15107/rcub_rims_214
ER  - 

@article{
author = "Aćimović, Zagorka and Terzić, Anja and Andrić, Ljubiša and Pavlović, Ljubica and Pavlović, Marko",
year = "2013",
abstract = "Various possibilities for developing new mullite-based refractory linings that can be applied in a casting process were investigated and are presented in this paper. An optimization of the refractory-lining composition design with the controlled rheological properties was achieved by applying different lining components and altering the lining-production procedure. Mullite was used as a high-temperature filler. A mullite sample was tested with the following methods: X-ray diffraction analysis, differential thermal analysis and scanning-electron microscopy. The particle shape and particle size were analyzed with the program package for an image analysis called OZARIA 2.5. It was proved that an application of this type of lining has a positive effect on the surface quality, structural and mechanical properties of the castings of Fe-C alloys obtained by casting into sand molds, according to the method of expandable patterns (the EPC casting process).",
publisher = "Inst Za Kovinske Materiale I In Tehnologie, Ljubjana",
journal = "Materiali in tehnologije",
title = "Synthesizing a new type of mullite lining",
pages = "780-777",
number = "6",
volume = "47",
url = "https://hdl.handle.net/21.15107/rcub_rims_214"
}

Aćimović, Z., Terzić, A., Andrić, L., Pavlović, L.,& Pavlović, M.. (2013). Synthesizing a new type of mullite lining. in Materiali in tehnologije
Inst Za Kovinske Materiale I In Tehnologie, Ljubjana., 47(6), 777-780.
https://hdl.handle.net/21.15107/rcub_rims_214

Aćimović Z, Terzić A, Andrić L, Pavlović L, Pavlović M. Synthesizing a new type of mullite lining. in Materiali in tehnologije. 2013;47(6):777-780.
https://hdl.handle.net/21.15107/rcub_rims_214 .

Aćimović, Zagorka, Terzić, Anja, Andrić, Ljubiša, Pavlović, Ljubica, Pavlović, Marko, "Synthesizing a new type of mullite lining" in Materiali in tehnologije, 47, no. 6 (2013):777-780,
https://hdl.handle.net/21.15107/rcub_rims_214 .

TY  - JOUR
AU  - Aćimović, Zagorka
AU  - Terzić, Anja
AU  - Andrić, Ljubiša
AU  - Pavlović, Ljubica
AU  - Pavlović, Marko
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5675
AB  - This work investigated the possibility of developing new chromite-based refractory coatings for hot metal casting applications. The coating composition and rheological properties were optimized by careful choice of binding agents and addition of a suspension maintenance agent in the coating. Different solvents (water and isopropyl alcohol) and casting methods were used in the tests. Chromite was used as refractory filler in both the water- And alcohol-based coating compositions. The chromite was examined by X-ray diffraction analysis and scanning electron microscopy. The chromite shape and grain size were analysed visually with the aid of the OZARIA 2.5 PC image analysis package. Test samples were cast using sand moulds and by the method of expandable patterns using a polymer model, also known as the "lost foam" casting process. The investigation demonstrated that water- And alcohol-based coatings have positive influence on the surface quality, structural and mechanical properties of alloy castings made with both casting processes.
PB  - Verlag Schmidt GmbH
T2  - InterCeram: International Ceramic Review
T1  - Application of chromite in the production of refractory coatings
EP  - 293
IS  - 4
SP  - 290
VL  - 62
UR  - https://hdl.handle.net/21.15107/rcub_rims_221
ER  - 

@article{
author = "Aćimović, Zagorka and Terzić, Anja and Andrić, Ljubiša and Pavlović, Ljubica and Pavlović, Marko",
year = "2013",
abstract = "This work investigated the possibility of developing new chromite-based refractory coatings for hot metal casting applications. The coating composition and rheological properties were optimized by careful choice of binding agents and addition of a suspension maintenance agent in the coating. Different solvents (water and isopropyl alcohol) and casting methods were used in the tests. Chromite was used as refractory filler in both the water- And alcohol-based coating compositions. The chromite was examined by X-ray diffraction analysis and scanning electron microscopy. The chromite shape and grain size were analysed visually with the aid of the OZARIA 2.5 PC image analysis package. Test samples were cast using sand moulds and by the method of expandable patterns using a polymer model, also known as the "lost foam" casting process. The investigation demonstrated that water- And alcohol-based coatings have positive influence on the surface quality, structural and mechanical properties of alloy castings made with both casting processes.",
publisher = "Verlag Schmidt GmbH",
journal = "InterCeram: International Ceramic Review",
title = "Application of chromite in the production of refractory coatings",
pages = "293-290",
number = "4",
volume = "62",
url = "https://hdl.handle.net/21.15107/rcub_rims_221"
}

Aćimović, Z., Terzić, A., Andrić, L., Pavlović, L.,& Pavlović, M.. (2013). Application of chromite in the production of refractory coatings. in InterCeram: International Ceramic Review
Verlag Schmidt GmbH., 62(4), 290-293.
https://hdl.handle.net/21.15107/rcub_rims_221

Aćimović Z, Terzić A, Andrić L, Pavlović L, Pavlović M. Application of chromite in the production of refractory coatings. in InterCeram: International Ceramic Review. 2013;62(4):290-293.
https://hdl.handle.net/21.15107/rcub_rims_221 .

Aćimović, Zagorka, Terzić, Anja, Andrić, Ljubiša, Pavlović, Ljubica, Pavlović, Marko, "Application of chromite in the production of refractory coatings" in InterCeram: International Ceramic Review, 62, no. 4 (2013):290-293,
https://hdl.handle.net/21.15107/rcub_rims_221 .