TY  - JOUR
AU  - Veljović, Đorđe
AU  - Matić, Tamara
AU  - Stamenić, Tanja
AU  - Kojić, Vesna
AU  - Dimitrijević-Branković, Suzana
AU  - Lukić, Miodrag J.
AU  - Jevtić, Sanja
AU  - Radovanović, Željko
AU  - Petrović, Rada
AU  - Janaćković, Đorđe
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4126
AB  - The aim of this study was to improve the mechanical properties and to optimize antimicrobial activity of hydroxyapatite (HAP) by simultaneous doping with Mg and Cu ions in order to obtain material that would be able to assist in the bone/tooth healing process, prevent post-implementation infections and provide satisfying values of hardness and fracture toughness for biomedical application. Ion doping was done during the hydrothermal synthesis of HAP powders, whereby the content of Mg ions in the starting solution was varied between 1-20 mol. % with regard to Ca ions, while the amount of Cu ions was kept constant at 0.4 mol. %. The green compacts were sintered for 2 h at temperatures ranging 750-1200 degrees C depending on the Mg content, chosen in agreement with dilatometry results. Presence of Mg ions was found to favour transition from HAP to beta-tricalcium phosphate phase (beta-TCP), which enabled formation of biphasic HAP/beta-TCP and pure beta-TCP phase at 160 degrees C during hydrothermal synthesis. In vitro investigation of antimicrobial activity against Escherichia coli, Staphylococcus aureus and Enterococcus faecalis showed satisfactory antimicrobial activity. MTT assay performed on MRC-5 and L929 cell lines showed excellent cytocompatibility and cell proliferation. Maximum hardness by Vickers and fracture toughness values, 4.96 GPa and 1.75 MPa m(1/2) respectively, were obtained upon addition of 5 mol. % Mg, as a consequence of the lowest grain size and porosity, as well as the highest densification rate. This is, to the best of our knowledge, the highest fracture toughness for HAP or beta-TCP ceramics reported thus far.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Mg/Cu co-substituted hydroxyapatite - Biocompatibility, mechanical properties and antimicrobial activity
EP  - 22039
IS  - 17
SP  - 22029
VL  - 45
DO  - 10.1016/j.ceramint.2019.07.219
ER  - 

@article{
author = "Veljović, Đorđe and Matić, Tamara and Stamenić, Tanja and Kojić, Vesna and Dimitrijević-Branković, Suzana and Lukić, Miodrag J. and Jevtić, Sanja and Radovanović, Željko and Petrović, Rada and Janaćković, Đorđe",
year = "2019",
abstract = "The aim of this study was to improve the mechanical properties and to optimize antimicrobial activity of hydroxyapatite (HAP) by simultaneous doping with Mg and Cu ions in order to obtain material that would be able to assist in the bone/tooth healing process, prevent post-implementation infections and provide satisfying values of hardness and fracture toughness for biomedical application. Ion doping was done during the hydrothermal synthesis of HAP powders, whereby the content of Mg ions in the starting solution was varied between 1-20 mol. % with regard to Ca ions, while the amount of Cu ions was kept constant at 0.4 mol. %. The green compacts were sintered for 2 h at temperatures ranging 750-1200 degrees C depending on the Mg content, chosen in agreement with dilatometry results. Presence of Mg ions was found to favour transition from HAP to beta-tricalcium phosphate phase (beta-TCP), which enabled formation of biphasic HAP/beta-TCP and pure beta-TCP phase at 160 degrees C during hydrothermal synthesis. In vitro investigation of antimicrobial activity against Escherichia coli, Staphylococcus aureus and Enterococcus faecalis showed satisfactory antimicrobial activity. MTT assay performed on MRC-5 and L929 cell lines showed excellent cytocompatibility and cell proliferation. Maximum hardness by Vickers and fracture toughness values, 4.96 GPa and 1.75 MPa m(1/2) respectively, were obtained upon addition of 5 mol. % Mg, as a consequence of the lowest grain size and porosity, as well as the highest densification rate. This is, to the best of our knowledge, the highest fracture toughness for HAP or beta-TCP ceramics reported thus far.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Mg/Cu co-substituted hydroxyapatite - Biocompatibility, mechanical properties and antimicrobial activity",
pages = "22039-22029",
number = "17",
volume = "45",
doi = "10.1016/j.ceramint.2019.07.219"
}

Veljović, Đ., Matić, T., Stamenić, T., Kojić, V., Dimitrijević-Branković, S., Lukić, M. J., Jevtić, S., Radovanović, Ž., Petrović, R.,& Janaćković, Đ.. (2019). Mg/Cu co-substituted hydroxyapatite - Biocompatibility, mechanical properties and antimicrobial activity. in Ceramics International
Elsevier Sci Ltd, Oxford., 45(17), 22029-22039.
https://doi.org/10.1016/j.ceramint.2019.07.219

Veljović Đ, Matić T, Stamenić T, Kojić V, Dimitrijević-Branković S, Lukić MJ, Jevtić S, Radovanović Ž, Petrović R, Janaćković Đ. Mg/Cu co-substituted hydroxyapatite - Biocompatibility, mechanical properties and antimicrobial activity. in Ceramics International. 2019;45(17):22029-22039.
doi:10.1016/j.ceramint.2019.07.219 .

Veljović, Đorđe, Matić, Tamara, Stamenić, Tanja, Kojić, Vesna, Dimitrijević-Branković, Suzana, Lukić, Miodrag J., Jevtić, Sanja, Radovanović, Željko, Petrović, Rada, Janaćković, Đorđe, "Mg/Cu co-substituted hydroxyapatite - Biocompatibility, mechanical properties and antimicrobial activity" in Ceramics International, 45, no. 17 (2019):22029-22039,
https://doi.org/10.1016/j.ceramint.2019.07.219 . .

TY  - JOUR
AU  - Veljović, Đorđe
AU  - Matić, Tamara
AU  - Stamenić, Tanja
AU  - Kojić, Vesna
AU  - Dimitrijević-Branković, Suzana
AU  - Lukić, Miodrag J.
AU  - Jevtić, Sanja
AU  - Radovanović, Željko
AU  - Petrović, Rada
AU  - Janaćković, Đorđe
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5045
AB  - The aim of this study was to improve the mechanical properties and to optimize antimicrobial activity of hydroxyapatite (HAP) by simultaneous doping with Mg and Cu ions in order to obtain material that would be able to assist in the bone/tooth healing process, prevent post-implementation infections and provide satisfying values of hardness and fracture toughness for biomedical application. Ion doping was done during the hydrothermal synthesis of HAP powders, whereby the content of Mg ions in the starting solution was varied between 1-20 mol. % with regard to Ca ions, while the amount of Cu ions was kept constant at 0.4 mol. %. The green compacts were sintered for 2 h at temperatures ranging 750–1200 °C depending on the Mg content, chosen in agreement with dilatometry results. Presence of Mg ions was found to favour transition from HAP to β−tricalcium phosphate phase (β−TCP), which enabled formation of biphasic HAP/β−TCP and pure β−TCP phase at 160 °C during hydrothermal synthesis. In vitro investigation of antimicrobial activity against Escherichia coli, Staphylococcus aureus and Enterococcus faecalis showed satisfactory antimicrobial activity. MTT assay performed on MRC-5 and L929 cell lines showed excellent cytocompatibility and cell proliferation. Maximum hardness by Vickers and fracture toughness values, 4.96 GPa and 1.75 MPa m1/2 respectively, were obtained upon addition of 5 mol. % Mg, as a consequence of the lowest grain size and porosity, as well as the highest densification rate. This is, to the best of our knowledge, the highest fracture toughness for HAP or β-TCP ceramics reported thus far.
PB  - Elsevier Ltd
T2  - Ceramics International
T1  - Mg/Cu co-substituted hydroxyapatite – Biocompatibility, mechanical properties and antimicrobial activity
EP  - 22039
IS  - 17
SP  - 22029
VL  - 45
DO  - 10.1016/j.ceramint.2019.07.219
ER  - 

@article{
author = "Veljović, Đorđe and Matić, Tamara and Stamenić, Tanja and Kojić, Vesna and Dimitrijević-Branković, Suzana and Lukić, Miodrag J. and Jevtić, Sanja and Radovanović, Željko and Petrović, Rada and Janaćković, Đorđe",
year = "2019",
abstract = "The aim of this study was to improve the mechanical properties and to optimize antimicrobial activity of hydroxyapatite (HAP) by simultaneous doping with Mg and Cu ions in order to obtain material that would be able to assist in the bone/tooth healing process, prevent post-implementation infections and provide satisfying values of hardness and fracture toughness for biomedical application. Ion doping was done during the hydrothermal synthesis of HAP powders, whereby the content of Mg ions in the starting solution was varied between 1-20 mol. % with regard to Ca ions, while the amount of Cu ions was kept constant at 0.4 mol. %. The green compacts were sintered for 2 h at temperatures ranging 750–1200 °C depending on the Mg content, chosen in agreement with dilatometry results. Presence of Mg ions was found to favour transition from HAP to β−tricalcium phosphate phase (β−TCP), which enabled formation of biphasic HAP/β−TCP and pure β−TCP phase at 160 °C during hydrothermal synthesis. In vitro investigation of antimicrobial activity against Escherichia coli, Staphylococcus aureus and Enterococcus faecalis showed satisfactory antimicrobial activity. MTT assay performed on MRC-5 and L929 cell lines showed excellent cytocompatibility and cell proliferation. Maximum hardness by Vickers and fracture toughness values, 4.96 GPa and 1.75 MPa m1/2 respectively, were obtained upon addition of 5 mol. % Mg, as a consequence of the lowest grain size and porosity, as well as the highest densification rate. This is, to the best of our knowledge, the highest fracture toughness for HAP or β-TCP ceramics reported thus far.",
publisher = "Elsevier Ltd",
journal = "Ceramics International",
title = "Mg/Cu co-substituted hydroxyapatite – Biocompatibility, mechanical properties and antimicrobial activity",
pages = "22039-22029",
number = "17",
volume = "45",
doi = "10.1016/j.ceramint.2019.07.219"
}

Veljović, Đ., Matić, T., Stamenić, T., Kojić, V., Dimitrijević-Branković, S., Lukić, M. J., Jevtić, S., Radovanović, Ž., Petrović, R.,& Janaćković, Đ.. (2019). Mg/Cu co-substituted hydroxyapatite – Biocompatibility, mechanical properties and antimicrobial activity. in Ceramics International
Elsevier Ltd., 45(17), 22029-22039.
https://doi.org/10.1016/j.ceramint.2019.07.219

Veljović Đ, Matić T, Stamenić T, Kojić V, Dimitrijević-Branković S, Lukić MJ, Jevtić S, Radovanović Ž, Petrović R, Janaćković Đ. Mg/Cu co-substituted hydroxyapatite – Biocompatibility, mechanical properties and antimicrobial activity. in Ceramics International. 2019;45(17):22029-22039.
doi:10.1016/j.ceramint.2019.07.219 .

Veljović, Đorđe, Matić, Tamara, Stamenić, Tanja, Kojić, Vesna, Dimitrijević-Branković, Suzana, Lukić, Miodrag J., Jevtić, Sanja, Radovanović, Željko, Petrović, Rada, Janaćković, Đorđe, "Mg/Cu co-substituted hydroxyapatite – Biocompatibility, mechanical properties and antimicrobial activity" in Ceramics International, 45, no. 17 (2019):22029-22039,
https://doi.org/10.1016/j.ceramint.2019.07.219 . .