TY  - JOUR
AU  - Veljković, Filip M.
AU  - Dimitrijević, Stevan P.
AU  - Dimitrijević, Silvana B.
AU  - Vurdelja, Borislava D.
AU  - Matović, Branko Z.
AU  - Stoiljković, Milovan M.
AU  - Kamberović, Željko J.
AU  - Veličković, Suzana R.
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5317
AB  - This work presents the perspective of applying the laser desorption/ionization mass spectrometry (LDI MS) for characterization the anode film of the Ag60Cu26Zn14, Ag58.5Cu31.5Pd10, and Ag63Cu27In10 alloys (at high concentrations of chloride ions in solutions). The reference LDI mass spectra of anode films of pure Ag and Cu have been used for the identification of product corrosion. Knowing the clusters detected in the reference spectra lead to the facilitating identification of the LDI mass spectrum of the sample and reduces the analysis time. The LDI MS analysis of these alloys revealed that the predominant corrosion product are AgCl (from AgnCln+1−/+, n = 1–3), and CuCl (from “superhalogen” CumCln− clusters, m = 1–2, n = 2–6); it also revealed Cu2(OH)3Cl (from Cu2(OH)(H2O)2+) and Cu2O (from Cu(H2O)+, Cu2O doped with chlorine). These results are in accordance with the X-ray diffraction and Raman analysis. The LDI MS spectra of alloys contain the additional peaks formed due to the mutual influences of different metals in the alloys (AgCuCl3− (AgCl-CuCl2−), AgCu2Cl4− (AgCl-CuCl-CuCl2−), and Ag2CuCl4− (AgCl-AgCl-CuCl−), which is consistent with the identified corrosion products. It should be noted that the LDI MS suggest the presence of CuCl2, which can be interpreted as the corrosion products retained in the porous films of alloys, and not detected by the other methods due to a small amount. The future theoretical and experimental studies of metal clusters, significant for metallurgy, can contribute that the LDI MS is becoming a powerful analytical tool for characterization the metal surfaces.
PB  - Elsevier B.V.
T2  - Arabian Journal of Chemistry
T1  - Prospective of the LDI MS to characterization the corrosion products of silver-copper alloys on an example of the Ag-Cu-X (X- Zn, Pd, In) system
IS  - 2
SP  - 104461
VL  - 16
DO  - 10.1016/j.arabjc.2022.104461
ER  - 

@article{
author = "Veljković, Filip M. and Dimitrijević, Stevan P. and Dimitrijević, Silvana B. and Vurdelja, Borislava D. and Matović, Branko Z. and Stoiljković, Milovan M. and Kamberović, Željko J. and Veličković, Suzana R.",
year = "2023",
abstract = "This work presents the perspective of applying the laser desorption/ionization mass spectrometry (LDI MS) for characterization the anode film of the Ag60Cu26Zn14, Ag58.5Cu31.5Pd10, and Ag63Cu27In10 alloys (at high concentrations of chloride ions in solutions). The reference LDI mass spectra of anode films of pure Ag and Cu have been used for the identification of product corrosion. Knowing the clusters detected in the reference spectra lead to the facilitating identification of the LDI mass spectrum of the sample and reduces the analysis time. The LDI MS analysis of these alloys revealed that the predominant corrosion product are AgCl (from AgnCln+1−/+, n = 1–3), and CuCl (from “superhalogen” CumCln− clusters, m = 1–2, n = 2–6); it also revealed Cu2(OH)3Cl (from Cu2(OH)(H2O)2+) and Cu2O (from Cu(H2O)+, Cu2O doped with chlorine). These results are in accordance with the X-ray diffraction and Raman analysis. The LDI MS spectra of alloys contain the additional peaks formed due to the mutual influences of different metals in the alloys (AgCuCl3− (AgCl-CuCl2−), AgCu2Cl4− (AgCl-CuCl-CuCl2−), and Ag2CuCl4− (AgCl-AgCl-CuCl−), which is consistent with the identified corrosion products. It should be noted that the LDI MS suggest the presence of CuCl2, which can be interpreted as the corrosion products retained in the porous films of alloys, and not detected by the other methods due to a small amount. The future theoretical and experimental studies of metal clusters, significant for metallurgy, can contribute that the LDI MS is becoming a powerful analytical tool for characterization the metal surfaces.",
publisher = "Elsevier B.V.",
journal = "Arabian Journal of Chemistry",
title = "Prospective of the LDI MS to characterization the corrosion products of silver-copper alloys on an example of the Ag-Cu-X (X- Zn, Pd, In) system",
number = "2",
pages = "104461",
volume = "16",
doi = "10.1016/j.arabjc.2022.104461"
}

Veljković, F. M., Dimitrijević, S. P., Dimitrijević, S. B., Vurdelja, B. D., Matović, B. Z., Stoiljković, M. M., Kamberović, Ž. J.,& Veličković, S. R.. (2023). Prospective of the LDI MS to characterization the corrosion products of silver-copper alloys on an example of the Ag-Cu-X (X- Zn, Pd, In) system. in Arabian Journal of Chemistry
Elsevier B.V.., 16(2), 104461.
https://doi.org/10.1016/j.arabjc.2022.104461

Veljković FM, Dimitrijević SP, Dimitrijević SB, Vurdelja BD, Matović BZ, Stoiljković MM, Kamberović ŽJ, Veličković SR. Prospective of the LDI MS to characterization the corrosion products of silver-copper alloys on an example of the Ag-Cu-X (X- Zn, Pd, In) system. in Arabian Journal of Chemistry. 2023;16(2):104461.
doi:10.1016/j.arabjc.2022.104461 .

Veljković, Filip M., Dimitrijević, Stevan P., Dimitrijević, Silvana B., Vurdelja, Borislava D., Matović, Branko Z., Stoiljković, Milovan M., Kamberović, Željko J., Veličković, Suzana R., "Prospective of the LDI MS to characterization the corrosion products of silver-copper alloys on an example of the Ag-Cu-X (X- Zn, Pd, In) system" in Arabian Journal of Chemistry, 16, no. 2 (2023):104461,
https://doi.org/10.1016/j.arabjc.2022.104461 . .

TY  - CONF
AU  - Korać, Marija
AU  - Dimitrijević, Stevan
AU  - Delijić, Kemal
AU  - Dimitrijević, Silvana
AU  - Kamberović, Željko
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6841
AB  - The presented paper investigates the influence of zinc addition on corrosion characteristics of different sterling silver alloy systems. Open circuit potential measurements, linear polarization resistance method, and potentiodynamic polarization tests were employed to determine the corrosion characteristics of the alloys. The materials were tested in an Artificial Sweat, 0.9% NaCl, and 0.01M Na2S solutions. Based on the presented results, it could be concluded that zinc has the most significant direct impact. The benefits of zinc addition are especially noticeable in aluminum-containing alloy systems, but only up to 3.7 % of Zn. The best results are achieved for alloy AgCu1.9Zn3.7Al1.6Si0.3.
PB  - Belgrade : Association of Metallurgical Engineers of Serbia (AMES)
C3  - Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023
T1  - Influence of zinc addition on anti-tarnish silver alloys in four different systems
EP  - 290
SP  - 286
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6841
ER  - 

@conference{
author = "Korać, Marija and Dimitrijević, Stevan and Delijić, Kemal and Dimitrijević, Silvana and Kamberović, Željko",
year = "2023",
abstract = "The presented paper investigates the influence of zinc addition on corrosion characteristics of different sterling silver alloy systems. Open circuit potential measurements, linear polarization resistance method, and potentiodynamic polarization tests were employed to determine the corrosion characteristics of the alloys. The materials were tested in an Artificial Sweat, 0.9% NaCl, and 0.01M Na2S solutions. Based on the presented results, it could be concluded that zinc has the most significant direct impact. The benefits of zinc addition are especially noticeable in aluminum-containing alloy systems, but only up to 3.7 % of Zn. The best results are achieved for alloy AgCu1.9Zn3.7Al1.6Si0.3.",
publisher = "Belgrade : Association of Metallurgical Engineers of Serbia (AMES)",
journal = "Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023",
title = "Influence of zinc addition on anti-tarnish silver alloys in four different systems",
pages = "290-286",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6841"
}

Korać, M., Dimitrijević, S., Delijić, K., Dimitrijević, S.,& Kamberović, Ž.. (2023). Influence of zinc addition on anti-tarnish silver alloys in four different systems. in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023
Belgrade : Association of Metallurgical Engineers of Serbia (AMES)., 286-290.
https://hdl.handle.net/21.15107/rcub_technorep_6841

Korać M, Dimitrijević S, Delijić K, Dimitrijević S, Kamberović Ž. Influence of zinc addition on anti-tarnish silver alloys in four different systems. in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023. 2023;:286-290.
https://hdl.handle.net/21.15107/rcub_technorep_6841 .

Korać, Marija, Dimitrijević, Stevan, Delijić, Kemal, Dimitrijević, Silvana, Kamberović, Željko, "Influence of zinc addition on anti-tarnish silver alloys in four different systems" in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023 (2023):286-290,
https://hdl.handle.net/21.15107/rcub_technorep_6841 .

TY  - JOUR
AU  - Mladenović, Ivana O.
AU  - Vuksanović, Marija M.
AU  - Dimitrijević, Stevan P.
AU  - Vasilić, Rastko
AU  - Radojević, Vesna J.
AU  - Vasiljević-Radović, Dana G.
AU  - Nikolić, Nebojša D.
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7072
AB  - Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic regime. Morphological, structural, and roughness analysis of the pigment particles, the pure (pigment-free) Cu coating, and the Cu coatings with incorporated pigment particles were performed using SEM, XRD, and AFM techniques, respectively. Hardness and creep resistance were considered for the examination of the mechanical properties of the Cu coatings, applying Chicot–Lesage (for hardness) and Sargent–Ashby (for creep resistance) mathematical models. The wettability of the Cu coatings was examined by the static sessile drop method by a measurement of the water contact angle. The incorporation of pigment particles in the Cu deposits did not significantly affect the morphology or texture of the coatings, while the roughness of the deposits rose with the rise in pigment particle concentrations. The hardness of the Cu coatings also increased with the increasing concentration of pigments and was greater than that obtained for the pigment-free Cu coating. The presence of the pigments caused a change in the wettability of the Cu coatings from hydrophilic (for the pigment-free Cu coating) to hydrophobic (for Cu coatings with incorporated particles) surface areas.
PB  - MDPI
T2  - Metals
T1  - Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
IS  - 12
SP  - 1979
VL  - 13
DO  - 10.3390/met13121979
ER  - 

@article{
author = "Mladenović, Ivana O. and Vuksanović, Marija M. and Dimitrijević, Stevan P. and Vasilić, Rastko and Radojević, Vesna J. and Vasiljević-Radović, Dana G. and Nikolić, Nebojša D.",
year = "2023",
abstract = "Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic regime. Morphological, structural, and roughness analysis of the pigment particles, the pure (pigment-free) Cu coating, and the Cu coatings with incorporated pigment particles were performed using SEM, XRD, and AFM techniques, respectively. Hardness and creep resistance were considered for the examination of the mechanical properties of the Cu coatings, applying Chicot–Lesage (for hardness) and Sargent–Ashby (for creep resistance) mathematical models. The wettability of the Cu coatings was examined by the static sessile drop method by a measurement of the water contact angle. The incorporation of pigment particles in the Cu deposits did not significantly affect the morphology or texture of the coatings, while the roughness of the deposits rose with the rise in pigment particle concentrations. The hardness of the Cu coatings also increased with the increasing concentration of pigments and was greater than that obtained for the pigment-free Cu coating. The presence of the pigments caused a change in the wettability of the Cu coatings from hydrophilic (for the pigment-free Cu coating) to hydrophobic (for Cu coatings with incorporated particles) surface areas.",
publisher = "MDPI",
journal = "Metals",
title = "Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles",
number = "12",
pages = "1979",
volume = "13",
doi = "10.3390/met13121979"
}

Mladenović, I. O., Vuksanović, M. M., Dimitrijević, S. P., Vasilić, R., Radojević, V. J., Vasiljević-Radović, D. G.,& Nikolić, N. D.. (2023). Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles. in Metals
MDPI., 13(12), 1979.
https://doi.org/10.3390/met13121979

Mladenović IO, Vuksanović MM, Dimitrijević SP, Vasilić R, Radojević VJ, Vasiljević-Radović DG, Nikolić ND. Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles. in Metals. 2023;13(12):1979.
doi:10.3390/met13121979 .

Mladenović, Ivana O., Vuksanović, Marija M., Dimitrijević, Stevan P., Vasilić, Rastko, Radojević, Vesna J., Vasiljević-Radović, Dana G., Nikolić, Nebojša D., "Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles" in Metals, 13, no. 12 (2023):1979,
https://doi.org/10.3390/met13121979 . .

TY  - JOUR
AU  - Matović, Branko
AU  - Maletaškić, Jelena
AU  - Maksimović, Vesna
AU  - Dimitrijević, Stevan P.
AU  - Todorović, Bratislav
AU  - Pejić, Milan
AU  - Zagorac, Dejan
AU  - Zagorac, Jelena
AU  - Zeng, Yu-Ping
AU  - Cvijović-Alagić, Ivana
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5959
AB  - Multicomponent oxide with pyrochlore structure (A2B2O7), containing 7 different A-site cations and 3 B-site cations in equiatomic amounts, was synthesized. Powders with nominal composition (La1/7Sm1/7Nd1/7Pr1/7Y1/7Gd1/7Yb1/7)2(Sn1/3Hf1/3Zr1/3)2O7 were fabricated through a reaction of metal nitrates (A-site) and metal chlorides (B-site) with sodium hydroxide during the solid state displacement reaction. Room temperature synthesis initially resulted in the obtainment of amorphous powders, which crystallized after subsequent calcination to form single crystalline compounds. Crystalline high-entropy ceramic powders formation took place at temperatures as low as 750 °C. During calcination, defective fluorite (F-A2B2O7) and crystal pyrochlore (Py-A2B2O7) structures coexist. A large number of cations induce the obtainment of stable high-entropy pyrochlores. Results showed that sintering at 1650 °C lead to pure crystalline single-phase pyrochlore formation. High-density ceramic, free of additives, was obtained after powders were compacted and subjected to pressureless sintering at 1650 °C. Multicomponent pyrochlore structure was investigated using the theoretical and experimental multi-methodological approach.
PB  - Sociedad Espanola de Ceramica y Vidrio
T2  - Boletin de la Sociedad Espanola de Ceramica y Vidrio
T1  - Multicomponent solid solution with pyrochlore structure
T1  - Solución sólida multicomponente con estructura de pirocloro
DO  - 10.1016/j.bsecv.2023.01.005
ER  - 

@article{
author = "Matović, Branko and Maletaškić, Jelena and Maksimović, Vesna and Dimitrijević, Stevan P. and Todorović, Bratislav and Pejić, Milan and Zagorac, Dejan and Zagorac, Jelena and Zeng, Yu-Ping and Cvijović-Alagić, Ivana",
year = "2023",
abstract = "Multicomponent oxide with pyrochlore structure (A2B2O7), containing 7 different A-site cations and 3 B-site cations in equiatomic amounts, was synthesized. Powders with nominal composition (La1/7Sm1/7Nd1/7Pr1/7Y1/7Gd1/7Yb1/7)2(Sn1/3Hf1/3Zr1/3)2O7 were fabricated through a reaction of metal nitrates (A-site) and metal chlorides (B-site) with sodium hydroxide during the solid state displacement reaction. Room temperature synthesis initially resulted in the obtainment of amorphous powders, which crystallized after subsequent calcination to form single crystalline compounds. Crystalline high-entropy ceramic powders formation took place at temperatures as low as 750 °C. During calcination, defective fluorite (F-A2B2O7) and crystal pyrochlore (Py-A2B2O7) structures coexist. A large number of cations induce the obtainment of stable high-entropy pyrochlores. Results showed that sintering at 1650 °C lead to pure crystalline single-phase pyrochlore formation. High-density ceramic, free of additives, was obtained after powders were compacted and subjected to pressureless sintering at 1650 °C. Multicomponent pyrochlore structure was investigated using the theoretical and experimental multi-methodological approach.",
publisher = "Sociedad Espanola de Ceramica y Vidrio",
journal = "Boletin de la Sociedad Espanola de Ceramica y Vidrio",
title = "Multicomponent solid solution with pyrochlore structure, Solución sólida multicomponente con estructura de pirocloro",
doi = "10.1016/j.bsecv.2023.01.005"
}

Matović, B., Maletaškić, J., Maksimović, V., Dimitrijević, S. P., Todorović, B., Pejić, M., Zagorac, D., Zagorac, J., Zeng, Y.,& Cvijović-Alagić, I.. (2023). Multicomponent solid solution with pyrochlore structure. in Boletin de la Sociedad Espanola de Ceramica y Vidrio
Sociedad Espanola de Ceramica y Vidrio..
https://doi.org/10.1016/j.bsecv.2023.01.005

Matović B, Maletaškić J, Maksimović V, Dimitrijević SP, Todorović B, Pejić M, Zagorac D, Zagorac J, Zeng Y, Cvijović-Alagić I. Multicomponent solid solution with pyrochlore structure. in Boletin de la Sociedad Espanola de Ceramica y Vidrio. 2023;.
doi:10.1016/j.bsecv.2023.01.005 .

Matović, Branko, Maletaškić, Jelena, Maksimović, Vesna, Dimitrijević, Stevan P., Todorović, Bratislav, Pejić, Milan, Zagorac, Dejan, Zagorac, Jelena, Zeng, Yu-Ping, Cvijović-Alagić, Ivana, "Multicomponent solid solution with pyrochlore structure" in Boletin de la Sociedad Espanola de Ceramica y Vidrio (2023),
https://doi.org/10.1016/j.bsecv.2023.01.005 . .

TY  - CONF
AU  - Dimitrijević, Stevan P.
AU  - Dimitrijević, Silvana B.
AU  - Ivanović, Aleksandra T.
AU  - Kovačević, Renata
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6801
AB  - Palladium alloys with low nickel content are commonly used as catalyst-trap for platinum or
platinum-rhodium catalysts in the process of production of nitric acid. Pure palladium and,
consequently, alloys with a high concentration of Pd are highly resistant in many corrosion
environments across the full pH range, from 0 to 14 and beyond, in the presence of different anions.
Mineral acids do not affect palladium, especially at lower concentrations; they can be dissolved
just in the mix of them. However, nickel in the alloy can be selectively dissolved in single mineral
acid with the use of an oxidation agent or anodic polarization, which is the more controllable
process. The aim of the work is the research of dealloying of PdNi5 in 0.5M sulfuric acid under
anodic polarization conditions. This study used open circuit potential, linear polarization
resistance, and chronoamperometry as electrochemical methods. Scanning electronic microscopy
with energy-dispersive X-ray spectroscopy (SEM-EDS) and inductively coupled plasma mass
spectrometry (ICP-MS) were used as structural and analytical techniques for the study of PdNi5
alloy dealloying in 0.5M sulfuric acid at three different anodic potentials.
AB  - Legure paladijuma sa niskim sadržajem nikla se obično koriste kao havatači katalizatora za platinu ili platina-rodijum katalizatore u procesu proizvodnje azotne kiseline. Čisti paladijum i posledično legure sa visokom koncentracijom Pd su visoko otporni u mnogim korozionim sredinama u punom pH opsegu, od 0 do 14 i više, u prisustvu različitih anjona. Mineralne kiseline ne utiču na paladijum, posebno na nižim koncentracijama; može se rastvoriti samo u njihovoj mešavini. Međutim, nikl u leguri može se selektivno rastvoriti u jednoj mineralnoj kiselini uz upotrebu oksidacionog agensa ili anodne polarizacije, što je proces koji se može više kontrolisati. Cilj rada je istraživanje dealloying-a PdNi5 u 0,5M sumpornoj kiselini u uslovima anodne polarizacije. Ova studija je koristila potencijal otvorenog kola, otpor linearne polarizacije i hronoamperometriju kao elektrohemijske metode. Skenirajuća elektronska mikroskopija sa energetski disperzivnom rendgenskom spektroskopijom (SEM-EDS) i masena spektrometrija induktivno spregnute plazme (ICP-MS) korišćene su kao strukturne i analitičke tehnike za proučavanje dealloying-a legure PdNi5 u 0,5M sumpornoj kiselini na tri različita anodna potencijala.
PB  - Beograd : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS), Society for Renewable Electrical Power Sources
C3  - Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023
T1  - DEALLOYING OF PdNi5 ALLOY IN 0.5M SULFURIC ACID
T1  - DEALLOYING PdNi5 LEGURE U 0.5M SULFATNOJ KISELINI
EP  - 349
SP  - 341
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6801
ER  - 

@conference{
author = "Dimitrijević, Stevan P. and Dimitrijević, Silvana B. and Ivanović, Aleksandra T. and Kovačević, Renata",
year = "2023",
abstract = "Palladium alloys with low nickel content are commonly used as catalyst-trap for platinum or
platinum-rhodium catalysts in the process of production of nitric acid. Pure palladium and,
consequently, alloys with a high concentration of Pd are highly resistant in many corrosion
environments across the full pH range, from 0 to 14 and beyond, in the presence of different anions.
Mineral acids do not affect palladium, especially at lower concentrations; they can be dissolved
just in the mix of them. However, nickel in the alloy can be selectively dissolved in single mineral
acid with the use of an oxidation agent or anodic polarization, which is the more controllable
process. The aim of the work is the research of dealloying of PdNi5 in 0.5M sulfuric acid under
anodic polarization conditions. This study used open circuit potential, linear polarization
resistance, and chronoamperometry as electrochemical methods. Scanning electronic microscopy
with energy-dispersive X-ray spectroscopy (SEM-EDS) and inductively coupled plasma mass
spectrometry (ICP-MS) were used as structural and analytical techniques for the study of PdNi5
alloy dealloying in 0.5M sulfuric acid at three different anodic potentials., Legure paladijuma sa niskim sadržajem nikla se obično koriste kao havatači katalizatora za platinu ili platina-rodijum katalizatore u procesu proizvodnje azotne kiseline. Čisti paladijum i posledično legure sa visokom koncentracijom Pd su visoko otporni u mnogim korozionim sredinama u punom pH opsegu, od 0 do 14 i više, u prisustvu različitih anjona. Mineralne kiseline ne utiču na paladijum, posebno na nižim koncentracijama; može se rastvoriti samo u njihovoj mešavini. Međutim, nikl u leguri može se selektivno rastvoriti u jednoj mineralnoj kiselini uz upotrebu oksidacionog agensa ili anodne polarizacije, što je proces koji se može više kontrolisati. Cilj rada je istraživanje dealloying-a PdNi5 u 0,5M sumpornoj kiselini u uslovima anodne polarizacije. Ova studija je koristila potencijal otvorenog kola, otpor linearne polarizacije i hronoamperometriju kao elektrohemijske metode. Skenirajuća elektronska mikroskopija sa energetski disperzivnom rendgenskom spektroskopijom (SEM-EDS) i masena spektrometrija induktivno spregnute plazme (ICP-MS) korišćene su kao strukturne i analitičke tehnike za proučavanje dealloying-a legure PdNi5 u 0,5M sumpornoj kiselini na tri različita anodna potencijala.",
publisher = "Beograd : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS), Society for Renewable Electrical Power Sources",
journal = "Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023",
title = "DEALLOYING OF PdNi5 ALLOY IN 0.5M SULFURIC ACID, DEALLOYING PdNi5 LEGURE U 0.5M SULFATNOJ KISELINI",
pages = "349-341",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6801"
}

Dimitrijević, S. P., Dimitrijević, S. B., Ivanović, A. T.,& Kovačević, R.. (2023). DEALLOYING OF PdNi5 ALLOY IN 0.5M SULFURIC ACID. in Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023
Beograd : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS), Society for Renewable Electrical Power Sources., 341-349.
https://hdl.handle.net/21.15107/rcub_technorep_6801

Dimitrijević SP, Dimitrijević SB, Ivanović AT, Kovačević R. DEALLOYING OF PdNi5 ALLOY IN 0.5M SULFURIC ACID. in Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023. 2023;:341-349.
https://hdl.handle.net/21.15107/rcub_technorep_6801 .

Dimitrijević, Stevan P., Dimitrijević, Silvana B., Ivanović, Aleksandra T., Kovačević, Renata, "DEALLOYING OF PdNi5 ALLOY IN 0.5M SULFURIC ACID" in Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023 (2023):341-349,
https://hdl.handle.net/21.15107/rcub_technorep_6801 .

TY  - CONF
AU  - Dimitrijević, Silvana B.
AU  - Ivanović, Aleksandra T.
AU  - Magdalinović, Srđana
AU  - Đorđijevski, Stefan S.
AU  - Dimitrijević, Stevan P.
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6800
AB  - Recycling of printed circuit boards (PCBs) is an extremely complex and sensitive process. Physicochemical
characterization of printed circuit boards is significant for choosing the optimal
processing procedure. The aim of this research was the physico-chemical characterization of the
boards and the separated fractions after cutting on a shredder and magnetic separation. Separated
fractions (metal granulate, magnetic fraction, and plastic) were leached in three consecutive phases
by use of sulfuric acid, nitric acid, and aqua regia. The experiments were performed on the
fractions obtained by processing 100 kg of the sample and were compared with the results obtained by the chemical analysis of the sample obtained by manually unfolding 10 PCBs. Also, the grain size analysis of each separated fraction was determined.
AB  - Reciklaža štampanih ploča (PCBs) je izuzetno složen i osetljiv postupak. Fizičko-hemijska karakterizacija štampanih ploča je od velikog značaja zbog izbora optimalnog postupka za preradu. Cilj ovog istraživanja bila je fizičko-hemijska karakterizacija ploča kao i izdvojenih frakcija nakon sečenja na šrederu i magnetne separacije. Izdvojene frakcije (metalni granulat, magnetna frakcija i plastika) su rastvarane u tri uzastopne faze, luženjem, uz korišćenje: sumporne kiseline, azotne kiseline i carske vode. Eksperimenti su izvedeni na frakcijama dobijenim preradom 100 kg uzorka i upoređivani su sa rezultatima dobijenim hemijskom analizom uzorka dobijenog ručnim rasklapanjem 10 ploča. Takođe, određivan je granulo sastav svake izdvojene frakcije.
PB  - Beograd : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS), Society for Renewable Electrical Power Sources
C3  - Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023
T1  - PHYSICO-CHEMICAL CHARACTERIZATION OF PCBs
T1  - FIZIČKO-HEMIJSKA KARAKTERIZACIJA ŠTAMPANIH PLOČA
EP  - 339
SP  - 333
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6800
ER  - 

@conference{
author = "Dimitrijević, Silvana B. and Ivanović, Aleksandra T. and Magdalinović, Srđana and Đorđijevski, Stefan S. and Dimitrijević, Stevan P.",
year = "2023",
abstract = "Recycling of printed circuit boards (PCBs) is an extremely complex and sensitive process. Physicochemical
characterization of printed circuit boards is significant for choosing the optimal
processing procedure. The aim of this research was the physico-chemical characterization of the
boards and the separated fractions after cutting on a shredder and magnetic separation. Separated
fractions (metal granulate, magnetic fraction, and plastic) were leached in three consecutive phases
by use of sulfuric acid, nitric acid, and aqua regia. The experiments were performed on the
fractions obtained by processing 100 kg of the sample and were compared with the results obtained by the chemical analysis of the sample obtained by manually unfolding 10 PCBs. Also, the grain size analysis of each separated fraction was determined., Reciklaža štampanih ploča (PCBs) je izuzetno složen i osetljiv postupak. Fizičko-hemijska karakterizacija štampanih ploča je od velikog značaja zbog izbora optimalnog postupka za preradu. Cilj ovog istraživanja bila je fizičko-hemijska karakterizacija ploča kao i izdvojenih frakcija nakon sečenja na šrederu i magnetne separacije. Izdvojene frakcije (metalni granulat, magnetna frakcija i plastika) su rastvarane u tri uzastopne faze, luženjem, uz korišćenje: sumporne kiseline, azotne kiseline i carske vode. Eksperimenti su izvedeni na frakcijama dobijenim preradom 100 kg uzorka i upoređivani su sa rezultatima dobijenim hemijskom analizom uzorka dobijenog ručnim rasklapanjem 10 ploča. Takođe, određivan je granulo sastav svake izdvojene frakcije.",
publisher = "Beograd : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS), Society for Renewable Electrical Power Sources",
journal = "Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023",
title = "PHYSICO-CHEMICAL CHARACTERIZATION OF PCBs, FIZIČKO-HEMIJSKA KARAKTERIZACIJA ŠTAMPANIH PLOČA",
pages = "339-333",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6800"
}

Dimitrijević, S. B., Ivanović, A. T., Magdalinović, S., Đorđijevski, S. S.,& Dimitrijević, S. P.. (2023). PHYSICO-CHEMICAL CHARACTERIZATION OF PCBs. in Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023
Beograd : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS), Society for Renewable Electrical Power Sources., 333-339.
https://hdl.handle.net/21.15107/rcub_technorep_6800

Dimitrijević SB, Ivanović AT, Magdalinović S, Đorđijevski SS, Dimitrijević SP. PHYSICO-CHEMICAL CHARACTERIZATION OF PCBs. in Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023. 2023;:333-339.
https://hdl.handle.net/21.15107/rcub_technorep_6800 .

Dimitrijević, Silvana B., Ivanović, Aleksandra T., Magdalinović, Srđana, Đorđijevski, Stefan S., Dimitrijević, Stevan P., "PHYSICO-CHEMICAL CHARACTERIZATION OF PCBs" in Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023 (2023):333-339,
https://hdl.handle.net/21.15107/rcub_technorep_6800 .

TY  - CONF
AU  - Ivanović, Aleksandra T.
AU  - Dimitrijević, Silvana B.
AU  - Dimitrijević, Stevan P.
AU  - Petković, Branka B.
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6799
AB  - This paper present the results of defining the mathematical model which describes the dependence
of tensile strength from the influential input parameters, aimed at developing non-toxic alloys that
could completely respond to the requirements in traffic networks electrification by replacing the
currently used Cu-Cd alloy system. The use of Cu-Cd alloys system is always resulting in many
environmental problems. Mathematical model is defined using the enter MLRA method, resulted in
a linear model whose coefficient of determination was R2=0.826. Validation of the acquired model
was performed using the data from the laboratory investigation that are not used when defining the
model, rendering the same statistical reliability, with R2=0.815.
AB  - U ovom radu su prikazani rezultati definisanja matematičkog modela koji opisuje zavisnost zatezne čvrstoće od uticajnih ulaznih parametara, u cilju razvoja netoksičnih legura koje bi u potpunosti mogle da odgovore zahtevima elektrifikacije saobraćajnih mreža zamenom trenutno korišćene legure Cu-Cd sistema. Upotreba legura sistema Cu-Cd uvek dovodi do mnogih ekoloških problema. Matematički model je definisan primenom enter MLRA metode, što je rezultiralo linearnim modelom čiji je koeficijent determinacije R2=0,826. Validacija dobijenog modela izvršena je korišćenjem podataka iz laboratorijskog ispitivanja koji se ne koriste pri definisanju modela, što daje istu statističku pouzdanost, sa R2=0,815.
PB  - Beograd : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS), Society for Renewable Electrical Power Sources
C3  - Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023
T1  - STATISTICAL MODELING OF SOME ENVIRONMENTALLY-FRIENDLY COPPER-BASED ALLOYS
T1  - STATISTIČKO MODELOVANJE NEKIH EKOLOŠKI PRIHVATLJIVIH LEGURA NA BAZI BAKRA
EP  - 407
SP  - 403
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6799
ER  - 

@conference{
author = "Ivanović, Aleksandra T. and Dimitrijević, Silvana B. and Dimitrijević, Stevan P. and Petković, Branka B.",
year = "2023",
abstract = "This paper present the results of defining the mathematical model which describes the dependence
of tensile strength from the influential input parameters, aimed at developing non-toxic alloys that
could completely respond to the requirements in traffic networks electrification by replacing the
currently used Cu-Cd alloy system. The use of Cu-Cd alloys system is always resulting in many
environmental problems. Mathematical model is defined using the enter MLRA method, resulted in
a linear model whose coefficient of determination was R2=0.826. Validation of the acquired model
was performed using the data from the laboratory investigation that are not used when defining the
model, rendering the same statistical reliability, with R2=0.815., U ovom radu su prikazani rezultati definisanja matematičkog modela koji opisuje zavisnost zatezne čvrstoće od uticajnih ulaznih parametara, u cilju razvoja netoksičnih legura koje bi u potpunosti mogle da odgovore zahtevima elektrifikacije saobraćajnih mreža zamenom trenutno korišćene legure Cu-Cd sistema. Upotreba legura sistema Cu-Cd uvek dovodi do mnogih ekoloških problema. Matematički model je definisan primenom enter MLRA metode, što je rezultiralo linearnim modelom čiji je koeficijent determinacije R2=0,826. Validacija dobijenog modela izvršena je korišćenjem podataka iz laboratorijskog ispitivanja koji se ne koriste pri definisanju modela, što daje istu statističku pouzdanost, sa R2=0,815.",
publisher = "Beograd : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS), Society for Renewable Electrical Power Sources",
journal = "Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023",
title = "STATISTICAL MODELING OF SOME ENVIRONMENTALLY-FRIENDLY COPPER-BASED ALLOYS, STATISTIČKO MODELOVANJE NEKIH EKOLOŠKI PRIHVATLJIVIH LEGURA NA BAZI BAKRA",
pages = "407-403",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6799"
}

Ivanović, A. T., Dimitrijević, S. B., Dimitrijević, S. P.,& Petković, B. B.. (2023). STATISTICAL MODELING OF SOME ENVIRONMENTALLY-FRIENDLY COPPER-BASED ALLOYS. in Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023
Beograd : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS), Society for Renewable Electrical Power Sources., 403-407.
https://hdl.handle.net/21.15107/rcub_technorep_6799

Ivanović AT, Dimitrijević SB, Dimitrijević SP, Petković BB. STATISTICAL MODELING OF SOME ENVIRONMENTALLY-FRIENDLY COPPER-BASED ALLOYS. in Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023. 2023;:403-407.
https://hdl.handle.net/21.15107/rcub_technorep_6799 .

Ivanović, Aleksandra T., Dimitrijević, Silvana B., Dimitrijević, Stevan P., Petković, Branka B., "STATISTICAL MODELING OF SOME ENVIRONMENTALLY-FRIENDLY COPPER-BASED ALLOYS" in Proceedings / 11th International Conference on Renewable Electrical Power Sources, Belgrade, November 02-03, 2023 (2023):403-407,
https://hdl.handle.net/21.15107/rcub_technorep_6799 .

TY  - CONF
AU  - Dimitrijević, Silvana
AU  - Dimitrijević, Stevan
AU  - Ivanović, Aleksandra
AU  - Korać, Marija
AU  - Ranitović, Milisav
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6732
AB  - Although the same quality of various metals from the recycling process is considered for granted, obtaining aluminum of high purity and aluminum alloys with identical properties as from production from pure raw materials is a very challenging process, especially if the sources for recycling are numerous materials that contain different impurities. In this study, recycled alloys were produced by melting of aluminum scrap with the addition of the required components. This paper aims to compare two commercial Al alloys with their analogs from the recycling process. Both of the alloys belong to the aluminum series 6000, with designations 6060 and 6082. The results of comparing corrosion and physical characteristics are presented in this study. Physical characterization was performed by measuring the alloys' hardness and electrical conductivity. The electrochemical investigation used several corrosion methods, OCP (open circuit potential), measuring polarization curves in apparent Tafel region with extrapolation of results, and LRP (linear polarization resistance). The corrosion environment was acidulated 0.5M Na2SO4 with pH=2.5. The received results have confirmed insignificant differences between the properties of the commercial and alloys produced by the recycling. Recycled alloys have achieved almost identical mechanical properties and even slightly better corrosion characteristics, which was the consequence of the lower concentration of impurities in recycled alloys or higher concentration of microalloying components.
PB  - Belgrade : Association of Metallurgical Engineers of Serbia (AMES)
C3  - Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023
T1  - Comparation of corrosion and mechanical properties of commercial and recycled 6060 and 6082 aluminium alloys
EP  - 275
SP  - 269
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6732
ER  - 

@conference{
author = "Dimitrijević, Silvana and Dimitrijević, Stevan and Ivanović, Aleksandra and Korać, Marija and Ranitović, Milisav",
year = "2023",
abstract = "Although the same quality of various metals from the recycling process is considered for granted, obtaining aluminum of high purity and aluminum alloys with identical properties as from production from pure raw materials is a very challenging process, especially if the sources for recycling are numerous materials that contain different impurities. In this study, recycled alloys were produced by melting of aluminum scrap with the addition of the required components. This paper aims to compare two commercial Al alloys with their analogs from the recycling process. Both of the alloys belong to the aluminum series 6000, with designations 6060 and 6082. The results of comparing corrosion and physical characteristics are presented in this study. Physical characterization was performed by measuring the alloys' hardness and electrical conductivity. The electrochemical investigation used several corrosion methods, OCP (open circuit potential), measuring polarization curves in apparent Tafel region with extrapolation of results, and LRP (linear polarization resistance). The corrosion environment was acidulated 0.5M Na2SO4 with pH=2.5. The received results have confirmed insignificant differences between the properties of the commercial and alloys produced by the recycling. Recycled alloys have achieved almost identical mechanical properties and even slightly better corrosion characteristics, which was the consequence of the lower concentration of impurities in recycled alloys or higher concentration of microalloying components.",
publisher = "Belgrade : Association of Metallurgical Engineers of Serbia (AMES)",
journal = "Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023",
title = "Comparation of corrosion and mechanical properties of commercial and recycled 6060 and 6082 aluminium alloys",
pages = "275-269",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6732"
}

Dimitrijević, S., Dimitrijević, S., Ivanović, A., Korać, M.,& Ranitović, M.. (2023). Comparation of corrosion and mechanical properties of commercial and recycled 6060 and 6082 aluminium alloys. in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023
Belgrade : Association of Metallurgical Engineers of Serbia (AMES)., 269-275.
https://hdl.handle.net/21.15107/rcub_technorep_6732

Dimitrijević S, Dimitrijević S, Ivanović A, Korać M, Ranitović M. Comparation of corrosion and mechanical properties of commercial and recycled 6060 and 6082 aluminium alloys. in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023. 2023;:269-275.
https://hdl.handle.net/21.15107/rcub_technorep_6732 .

Dimitrijević, Silvana, Dimitrijević, Stevan, Ivanović, Aleksandra, Korać, Marija, Ranitović, Milisav, "Comparation of corrosion and mechanical properties of commercial and recycled 6060 and 6082 aluminium alloys" in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023 (2023):269-275,
https://hdl.handle.net/21.15107/rcub_technorep_6732 .

TY  - CONF
AU  - Ivanović, Aleksandra
AU  - Dimitrijević, Silvana
AU  - Dimitrijević, Stevan
AU  - Kovačević, Renata
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6733
AB  - Binary palladium alloys with nickel are known to have catalytic activity and are also used as catalyst-trap in the synthesis of nitric acid. High Pd alloys are corrosive resistant in many solutions, including highly alkaline and highly acidic. Although generally not prone to corrosion in low concentrations of mineral acids due to the high content of palladium in it, this alloy is still prone to the dealloying effect under specific conditions. The dealloying process was researched under anodic polarization in 1.0M nitric acid solution. Scanning electronic microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), inductively coupled plasma atomic emission spectroscopy (ICP-AES)  and electrochemical methods were used to study the susceptibility of PdNi5 alloy to dealloying.
PB  - Belgrade : Association of Metallurgical Engineers of Serbia (AMES)
C3  - Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023
T1  - Dealloying of PdNi5 Alloy in 1.0M Nitric Acid
EP  - 285
SP  - 279
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6733
ER  - 

@conference{
author = "Ivanović, Aleksandra and Dimitrijević, Silvana and Dimitrijević, Stevan and Kovačević, Renata",
year = "2023",
abstract = "Binary palladium alloys with nickel are known to have catalytic activity and are also used as catalyst-trap in the synthesis of nitric acid. High Pd alloys are corrosive resistant in many solutions, including highly alkaline and highly acidic. Although generally not prone to corrosion in low concentrations of mineral acids due to the high content of palladium in it, this alloy is still prone to the dealloying effect under specific conditions. The dealloying process was researched under anodic polarization in 1.0M nitric acid solution. Scanning electronic microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), inductively coupled plasma atomic emission spectroscopy (ICP-AES)  and electrochemical methods were used to study the susceptibility of PdNi5 alloy to dealloying.",
publisher = "Belgrade : Association of Metallurgical Engineers of Serbia (AMES)",
journal = "Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023",
title = "Dealloying of PdNi5 Alloy in 1.0M Nitric Acid",
pages = "285-279",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6733"
}

Ivanović, A., Dimitrijević, S., Dimitrijević, S.,& Kovačević, R.. (2023). Dealloying of PdNi5 Alloy in 1.0M Nitric Acid. in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023
Belgrade : Association of Metallurgical Engineers of Serbia (AMES)., 279-285.
https://hdl.handle.net/21.15107/rcub_technorep_6733

Ivanović A, Dimitrijević S, Dimitrijević S, Kovačević R. Dealloying of PdNi5 Alloy in 1.0M Nitric Acid. in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023. 2023;:279-285.
https://hdl.handle.net/21.15107/rcub_technorep_6733 .

Ivanović, Aleksandra, Dimitrijević, Silvana, Dimitrijević, Stevan, Kovačević, Renata, "Dealloying of PdNi5 Alloy in 1.0M Nitric Acid" in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023 (2023):279-285,
https://hdl.handle.net/21.15107/rcub_technorep_6733 .

Dimitrijević, S., Kamberović, Ž., Ranitović, M., Korać, M.,& Dimitrijević, S.. (2022). Poboljšanje karakteristika srebrnog praha mikrometarske veličine i optimizacija troškova proizvodnje u proizvodnom pogonu Chimet S.p.A.. in Tehnološko-metalurški fakultet
Univerzitet u Beogradu, Tehnološko-metalurški fakultet..
https://hdl.handle.net/21.15107/rcub_technorep_6647

Dimitrijević S, Kamberović Ž, Ranitović M, Korać M, Dimitrijević S. Poboljšanje karakteristika srebrnog praha mikrometarske veličine i optimizacija troškova proizvodnje u proizvodnom pogonu Chimet S.p.A.. in Tehnološko-metalurški fakultet. 2022;.
https://hdl.handle.net/21.15107/rcub_technorep_6647 .

Dimitrijević, Stevan, Kamberović, Željko, Ranitović, Milisav, Korać, Marija, Dimitrijević, Silvana, "Poboljšanje karakteristika srebrnog praha mikrometarske veličine i optimizacija troškova proizvodnje u proizvodnom pogonu Chimet S.p.A." in Tehnološko-metalurški fakultet (2022),
https://hdl.handle.net/21.15107/rcub_technorep_6647 .

TY  - JOUR
AU  - Dimitrijević, Stevan P.
AU  - Dimitrijević, Silvana B.
AU  - Ivanović, Aleksandra
AU  - Vuković, Nikola
AU  - Dhawan, Nikhil
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5206
AB  - This study investigates the electrochemical stability of the gold complex based on mercaptotriazole at an optimum pH of nine in the electrolyte with a gold concentration of 2.5 g dm−3. The stability of the complex was studied by visual monitoring and electrochemical characterization of electrolytes over a period of 1 year. Electrochemical characterization of the mercaptotriazole gold complex was performed using open circuit potential measurement, cyclic voltammetry, recording the polarization curves, pH, and conductivity of the electrolyte. Electrochemical characteristics and visual appearance of the mercaptotriazole gold complex at a pH ~ 9 were not significantly changed for one year, with no changes in its visual appearance. The results of this study are important for industrial applications in order to replace cyanide electrolytes with a stable organic complex.
PB  - Springer Science and Business Media Deutschland GmbH
T2  - Chemical Papers
T1  - Electrochemical stability of gold complex based on mercaptotriazole at optimal condition
DO  - 10.1007/s11696-022-02447-y
ER  - 

@article{
author = "Dimitrijević, Stevan P. and Dimitrijević, Silvana B. and Ivanović, Aleksandra and Vuković, Nikola and Dhawan, Nikhil",
year = "2022",
abstract = "This study investigates the electrochemical stability of the gold complex based on mercaptotriazole at an optimum pH of nine in the electrolyte with a gold concentration of 2.5 g dm−3. The stability of the complex was studied by visual monitoring and electrochemical characterization of electrolytes over a period of 1 year. Electrochemical characterization of the mercaptotriazole gold complex was performed using open circuit potential measurement, cyclic voltammetry, recording the polarization curves, pH, and conductivity of the electrolyte. Electrochemical characteristics and visual appearance of the mercaptotriazole gold complex at a pH ~ 9 were not significantly changed for one year, with no changes in its visual appearance. The results of this study are important for industrial applications in order to replace cyanide electrolytes with a stable organic complex.",
publisher = "Springer Science and Business Media Deutschland GmbH",
journal = "Chemical Papers",
title = "Electrochemical stability of gold complex based on mercaptotriazole at optimal condition",
doi = "10.1007/s11696-022-02447-y"
}

Dimitrijević, S. P., Dimitrijević, S. B., Ivanović, A., Vuković, N.,& Dhawan, N.. (2022). Electrochemical stability of gold complex based on mercaptotriazole at optimal condition. in Chemical Papers
Springer Science and Business Media Deutschland GmbH..
https://doi.org/10.1007/s11696-022-02447-y

Dimitrijević SP, Dimitrijević SB, Ivanović A, Vuković N, Dhawan N. Electrochemical stability of gold complex based on mercaptotriazole at optimal condition. in Chemical Papers. 2022;.
doi:10.1007/s11696-022-02447-y .

Dimitrijević, Stevan P., Dimitrijević, Silvana B., Ivanović, Aleksandra, Vuković, Nikola, Dhawan, Nikhil, "Electrochemical stability of gold complex based on mercaptotriazole at optimal condition" in Chemical Papers (2022),
https://doi.org/10.1007/s11696-022-02447-y . .

TY  - CONF
AU  - Dimitrijević, Stevan P.
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6630
AB  - Recycling specific e-waste from renewable energy provides an opportunity to integrate it with a pyrometallurgical production process of various types of non-ferrous alloys.  One type of alloy is used for brazing of different types of materials like copper and stainless steel and they are often used for solar collector installations. Other obtained alloys belong to the new type of tarnish-resistant silver alloys that can be used in electronics and various renewable applications. All recycled metals from the process are used for the later ingot metallurgy and could be further processed to obtain these alloys' wire, sheet metal, or other suitable shapes (rods, strips). This study presents the recycling process with the technology parameters and material flowsheets. Special attention in the paper is given to the structure of selected alloys. Optical microscopy, SEM with EDS, and the XRD method were used to characterize the microstructure of the alloys.
AB  - Reciklaža specifičnog elektronskog otpada iz obnovljivih izvora energije pruža mogućnost da se on integriše sa pirometalurškim proizvodnim procesom različitih vrsta obojenih legura. Jedna vrsta legura se koristi za lemljenje različitih vrsta materijala kao što su bakar i nerđajući čelik i često se koriste za instalacije solarnih kolektora. Ostale dobijene legure pripadaju novom tipu legura srebra otpornih na tamnjenje koje se mogu koristiti u elektronici i raznim aplikacijama obnovljivih izvora energije. Svi reciklirani metali iz procesa se koriste za kasniju ingot metalurgiju i mogu se dalje prerađivati da bi se dobila žica, lim ili drugi odgovarajući oblici (šipke, trake). Ova studija prezentuje proces reciklaže sa tehnološkim parametrima i tokovima materijala. Posebna pažnja u radu je posvećena strukturi odabranih legura. Za karakterizaciju mikrostrukture legura korišćeni su optička mikroskopija, SEM sa EDS-om i XRD metoda.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije SMEITS, Društvo za obnovljive izvore električne energije
C3  - Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije
T1  - Recycling of metals from renewable energy sources to alloys used in green energies
T1  - Recikliranje metala iz obnovljivih izvora energije u legure koje se koriste u zelenim energijama
EP  - 42
IS  - 1
SP  - 35
VL  - 10
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6630
ER  - 

@conference{
author = "Dimitrijević, Stevan P.",
year = "2022",
abstract = "Recycling specific e-waste from renewable energy provides an opportunity to integrate it with a pyrometallurgical production process of various types of non-ferrous alloys.  One type of alloy is used for brazing of different types of materials like copper and stainless steel and they are often used for solar collector installations. Other obtained alloys belong to the new type of tarnish-resistant silver alloys that can be used in electronics and various renewable applications. All recycled metals from the process are used for the later ingot metallurgy and could be further processed to obtain these alloys' wire, sheet metal, or other suitable shapes (rods, strips). This study presents the recycling process with the technology parameters and material flowsheets. Special attention in the paper is given to the structure of selected alloys. Optical microscopy, SEM with EDS, and the XRD method were used to characterize the microstructure of the alloys., Reciklaža specifičnog elektronskog otpada iz obnovljivih izvora energije pruža mogućnost da se on integriše sa pirometalurškim proizvodnim procesom različitih vrsta obojenih legura. Jedna vrsta legura se koristi za lemljenje različitih vrsta materijala kao što su bakar i nerđajući čelik i često se koriste za instalacije solarnih kolektora. Ostale dobijene legure pripadaju novom tipu legura srebra otpornih na tamnjenje koje se mogu koristiti u elektronici i raznim aplikacijama obnovljivih izvora energije. Svi reciklirani metali iz procesa se koriste za kasniju ingot metalurgiju i mogu se dalje prerađivati da bi se dobila žica, lim ili drugi odgovarajući oblici (šipke, trake). Ova studija prezentuje proces reciklaže sa tehnološkim parametrima i tokovima materijala. Posebna pažnja u radu je posvećena strukturi odabranih legura. Za karakterizaciju mikrostrukture legura korišćeni su optička mikroskopija, SEM sa EDS-om i XRD metoda.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije SMEITS, Društvo za obnovljive izvore električne energije",
journal = "Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije",
title = "Recycling of metals from renewable energy sources to alloys used in green energies, Recikliranje metala iz obnovljivih izvora energije u legure koje se koriste u zelenim energijama",
pages = "42-35",
number = "1",
volume = "10",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6630"
}

Dimitrijević, S. P.. (2022). Recycling of metals from renewable energy sources to alloys used in green energies. in Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije SMEITS, Društvo za obnovljive izvore električne energije., 10(1), 35-42.
https://hdl.handle.net/21.15107/rcub_technorep_6630

Dimitrijević SP. Recycling of metals from renewable energy sources to alloys used in green energies. in Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije. 2022;10(1):35-42.
https://hdl.handle.net/21.15107/rcub_technorep_6630 .

Dimitrijević, Stevan P., "Recycling of metals from renewable energy sources to alloys used in green energies" in Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije, 10, no. 1 (2022):35-42,
https://hdl.handle.net/21.15107/rcub_technorep_6630 .

TY  - CONF
AU  - Ivanović, Aleksandra T.
AU  - Dimitrijević, Silvana B.
AU  - Dimitrijević, Stevan P.
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6631
AB  - This paper presents original software, developed for the needs of mathematical modeling of complex processes using the simplex method. The software was developed in the Delphi programming language for the Windows environment. The idea was to use the developed software to determine the efficiency of the simplex method in choosing the optimal mode of heat treatment of PdNi5 alloy, and simplex triangle can visually monitor the legality of the behavior of the test process depending on the influential parameters.
AB  - U radu je predstavljen originalni softver, razvijen za potrebe matematičkog modeliranja složenih procesa primenom simpleks metode. Softver je razvijen u programskom jeziku Delphi za Vindovs okruženje. Ideja je bila da se razvijenim softverom utvrdi efikasnost simpleks metode u izboru optimalnog načina termičke obrade legure PdNi5, a simpleks trouglom se može vizuelno pratiti zakonitost ponašanja procesa ispitivanja u zavisnosti od uticajnih parametara.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije SMEITS, Društvo za obnovljive izvore električne energije
C3  - Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije
T1  - Presentation of software for applying simplex methods
T1  - Prezentacija softvera za primenu simpleks metoda
EP  - 210
IS  - 1
SP  - 207
VL  - 10
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6631
ER  - 

@conference{
author = "Ivanović, Aleksandra T. and Dimitrijević, Silvana B. and Dimitrijević, Stevan P.",
year = "2022",
abstract = "This paper presents original software, developed for the needs of mathematical modeling of complex processes using the simplex method. The software was developed in the Delphi programming language for the Windows environment. The idea was to use the developed software to determine the efficiency of the simplex method in choosing the optimal mode of heat treatment of PdNi5 alloy, and simplex triangle can visually monitor the legality of the behavior of the test process depending on the influential parameters., U radu je predstavljen originalni softver, razvijen za potrebe matematičkog modeliranja složenih procesa primenom simpleks metode. Softver je razvijen u programskom jeziku Delphi za Vindovs okruženje. Ideja je bila da se razvijenim softverom utvrdi efikasnost simpleks metode u izboru optimalnog načina termičke obrade legure PdNi5, a simpleks trouglom se može vizuelno pratiti zakonitost ponašanja procesa ispitivanja u zavisnosti od uticajnih parametara.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije SMEITS, Društvo za obnovljive izvore električne energije",
journal = "Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije",
title = "Presentation of software for applying simplex methods, Prezentacija softvera za primenu simpleks metoda",
pages = "210-207",
number = "1",
volume = "10",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6631"
}

Ivanović, A. T., Dimitrijević, S. B.,& Dimitrijević, S. P.. (2022). Presentation of software for applying simplex methods. in Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije SMEITS, Društvo za obnovljive izvore električne energije., 10(1), 207-210.
https://hdl.handle.net/21.15107/rcub_technorep_6631

Ivanović AT, Dimitrijević SB, Dimitrijević SP. Presentation of software for applying simplex methods. in Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije. 2022;10(1):207-210.
https://hdl.handle.net/21.15107/rcub_technorep_6631 .

Ivanović, Aleksandra T., Dimitrijević, Silvana B., Dimitrijević, Stevan P., "Presentation of software for applying simplex methods" in Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije, 10, no. 1 (2022):207-210,
https://hdl.handle.net/21.15107/rcub_technorep_6631 .

TY  - CONF
AU  - Stolić, Predrag
AU  - Stević, Zoran
AU  - Dimitrijević, Stevan
AU  - Stanimirović, Zdravko
AU  - Stanimirović, Ivanka
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6632
AB  - Current trends such as digitalization, digital transformation, Industry 4.0 and the like, which are characteristic of modern society as a whole, have imposed the world of data as an imperative of all spheres of human activity. In a very short period of time, all previously assumed barriers in the current amount of data in circulation at the global level, which is currently measured in tens of zettabytes with a tendency to continuously increase in the years to come, have been exceeded. Even if we reduce the level of observation to a single instance, there is almost no case in which we cannot identify any increase in the amount of data. In proportion to the increase in the amount of data, the required energy that needs to be provided at different levels for any action taken on this data has increased, whether it is the creation of this data, its storage, some processing, replication or some other adequate type of action. It is estimated that already few percents of the entire world production of electricity go to the segment of providing the necessary conditions for the performance of some of the work on data. Accordingly, many large data centers are partially or completely switching to systems based on the use of renewable energy sources. Although this transfer has brought a number of advantages, there is still the problem of data expansion in a long-term plan that new energy solutions need to follow. The paper will show how a more rational data handling at different levels of use can create a far more favorable energy environment at the global level and how this environment can contribute to the sustainability of currently applied solutions for renewable energy in different segments of use and work with data in a modern environment.
AB  - Trenutni trendovi poput digitalizacije, digitalne transformacije, industrije 4.0 i sličnog, koji su karakteristika savremenog društva u celini, nametnuli su svet podataka kao imperativ svih sfera ljudskog delovanja. U vrlo kratkom vremenskom roku probijene su sve ranije pretpostavljane barijere u trenutnoj količini podataka koja je u opticaju na globalnom nivou i koja se trenutno meri u desetinama zetabajta sa tendencijom kontinuiranog uvećanja u godinama koje slede. Trend povećanja količine podataka može se zabeležiti na svim nivoima, bez obzira da li posmatramo neki manji, lokalizovani uzorak, regionalni uzorak, ili, kao što je već navedeno, posmatramo globalni digitalni svet. Čak i ako nivo posmatranja svedemo na pojedinačnu instancu, gotovo da nema slučaja u kome ne možemo identifikovati neko povećanje količine podataka. Proporcionalno povećanju količine podataka, uvećala se i potrebna energija koju na različitim nivoima treba obezbediti za neku preduzetu radnju nad tim podacima, bilo da se radi o samom kreiranju tih podataka, skladištenju istih, nekoj vrsti obrade, umnožavanju ili nekoj drugoj adekvatnoj vrsti radnje nad tim podacima. Procenjuje se da već nekoliko procenata celokupne svetske proizvodnje električne energije odlazi na segment obezbeđenja neophodnih uslova za izvršenje neke od radnji nad podacima. U skladu sa tim, mnogi veliki centri za rukovanje podacima parcijalno ili u celosti prelaze na sisteme zasnovane na upotrebi obnovljivih izvora električne energije. Iako je taj transfer doneo niz prednosti i dalje postoji problem ekspanzije podataka na jednom dugoročnijem planu koji nova energetska rešenja treba da isprate. U radu će se pokazati kako se jednim racionalnijim rukovanjem podacima na različitim nivoima upotrebe može stvoriti daleko povoljnije energetsko okruženje na globalnom nivou i kako to okruženje može doprineti jednoj održivosti trenutno primenjenih rešenja koji se tiču upotrebe obnovljivih izvora električne energije u različitim segmentima upotrebe i rada sa podacima u modernom okruženju.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije SMEITS, Društvo za obnovljive izvore električne energije
C3  - Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije
T1  - Data handling culture – a forgotten aspect of the integration of renewable electrical power sources
T1  - Kultura rukovanja podacima – zaboravljeni aspekt integracije obnovljivih izvora električne energije
EP  - 180
IS  - 1
SP  - 173
VL  - 10
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6632
ER  - 

@conference{
author = "Stolić, Predrag and Stević, Zoran and Dimitrijević, Stevan and Stanimirović, Zdravko and Stanimirović, Ivanka",
year = "2022",
abstract = "Current trends such as digitalization, digital transformation, Industry 4.0 and the like, which are characteristic of modern society as a whole, have imposed the world of data as an imperative of all spheres of human activity. In a very short period of time, all previously assumed barriers in the current amount of data in circulation at the global level, which is currently measured in tens of zettabytes with a tendency to continuously increase in the years to come, have been exceeded. Even if we reduce the level of observation to a single instance, there is almost no case in which we cannot identify any increase in the amount of data. In proportion to the increase in the amount of data, the required energy that needs to be provided at different levels for any action taken on this data has increased, whether it is the creation of this data, its storage, some processing, replication or some other adequate type of action. It is estimated that already few percents of the entire world production of electricity go to the segment of providing the necessary conditions for the performance of some of the work on data. Accordingly, many large data centers are partially or completely switching to systems based on the use of renewable energy sources. Although this transfer has brought a number of advantages, there is still the problem of data expansion in a long-term plan that new energy solutions need to follow. The paper will show how a more rational data handling at different levels of use can create a far more favorable energy environment at the global level and how this environment can contribute to the sustainability of currently applied solutions for renewable energy in different segments of use and work with data in a modern environment., Trenutni trendovi poput digitalizacije, digitalne transformacije, industrije 4.0 i sličnog, koji su karakteristika savremenog društva u celini, nametnuli su svet podataka kao imperativ svih sfera ljudskog delovanja. U vrlo kratkom vremenskom roku probijene su sve ranije pretpostavljane barijere u trenutnoj količini podataka koja je u opticaju na globalnom nivou i koja se trenutno meri u desetinama zetabajta sa tendencijom kontinuiranog uvećanja u godinama koje slede. Trend povećanja količine podataka može se zabeležiti na svim nivoima, bez obzira da li posmatramo neki manji, lokalizovani uzorak, regionalni uzorak, ili, kao što je već navedeno, posmatramo globalni digitalni svet. Čak i ako nivo posmatranja svedemo na pojedinačnu instancu, gotovo da nema slučaja u kome ne možemo identifikovati neko povećanje količine podataka. Proporcionalno povećanju količine podataka, uvećala se i potrebna energija koju na različitim nivoima treba obezbediti za neku preduzetu radnju nad tim podacima, bilo da se radi o samom kreiranju tih podataka, skladištenju istih, nekoj vrsti obrade, umnožavanju ili nekoj drugoj adekvatnoj vrsti radnje nad tim podacima. Procenjuje se da već nekoliko procenata celokupne svetske proizvodnje električne energije odlazi na segment obezbeđenja neophodnih uslova za izvršenje neke od radnji nad podacima. U skladu sa tim, mnogi veliki centri za rukovanje podacima parcijalno ili u celosti prelaze na sisteme zasnovane na upotrebi obnovljivih izvora električne energije. Iako je taj transfer doneo niz prednosti i dalje postoji problem ekspanzije podataka na jednom dugoročnijem planu koji nova energetska rešenja treba da isprate. U radu će se pokazati kako se jednim racionalnijim rukovanjem podacima na različitim nivoima upotrebe može stvoriti daleko povoljnije energetsko okruženje na globalnom nivou i kako to okruženje može doprineti jednoj održivosti trenutno primenjenih rešenja koji se tiču upotrebe obnovljivih izvora električne energije u različitim segmentima upotrebe i rada sa podacima u modernom okruženju.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije SMEITS, Društvo za obnovljive izvore električne energije",
journal = "Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije",
title = "Data handling culture – a forgotten aspect of the integration of renewable electrical power sources, Kultura rukovanja podacima – zaboravljeni aspekt integracije obnovljivih izvora električne energije",
pages = "180-173",
number = "1",
volume = "10",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6632"
}

Stolić, P., Stević, Z., Dimitrijević, S., Stanimirović, Z.,& Stanimirović, I.. (2022). Data handling culture – a forgotten aspect of the integration of renewable electrical power sources. in Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije SMEITS, Društvo za obnovljive izvore električne energije., 10(1), 173-180.
https://hdl.handle.net/21.15107/rcub_technorep_6632

Stolić P, Stević Z, Dimitrijević S, Stanimirović Z, Stanimirović I. Data handling culture – a forgotten aspect of the integration of renewable electrical power sources. in Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije. 2022;10(1):173-180.
https://hdl.handle.net/21.15107/rcub_technorep_6632 .

Stolić, Predrag, Stević, Zoran, Dimitrijević, Stevan, Stanimirović, Zdravko, Stanimirović, Ivanka, "Data handling culture – a forgotten aspect of the integration of renewable electrical power sources" in Zbornik radova 10. Međunarodne konferencije o obnovljivim izvorima električne energije, 10, no. 1 (2022):173-180,
https://hdl.handle.net/21.15107/rcub_technorep_6632 .

TY  - CONF
AU  - Magdalinović, Srđana
AU  - Dimitrijević, Silvana
AU  - Ivanović, Aleksandra
AU  - Dimitrijević, Stevan
AU  - Đorđievski, Stefan
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6646
AB  - Recycling of the waste printed circuit boards (PCBs) is necessary from both an economic and an
environmental point of view. Large amounts of waste contain significant amounts of valuable metals
used as the secondary source. The PCBs can be viewed as a complicated mineral raw material on which
mineral processing procedures can be applied. This work presents the mineral processing procedures
used in the certain stages of recycling waste printed circuit boards.
PB  - Bor : Mining and Metallurgy Institute
C3  - Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor
T1  - Application of mineral processing methods in recycling the waste printed circuit board
EP  - 50
SP  - 47
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6646
ER  - 

@conference{
author = "Magdalinović, Srđana and Dimitrijević, Silvana and Ivanović, Aleksandra and Dimitrijević, Stevan and Đorđievski, Stefan",
year = "2022",
abstract = "Recycling of the waste printed circuit boards (PCBs) is necessary from both an economic and an
environmental point of view. Large amounts of waste contain significant amounts of valuable metals
used as the secondary source. The PCBs can be viewed as a complicated mineral raw material on which
mineral processing procedures can be applied. This work presents the mineral processing procedures
used in the certain stages of recycling waste printed circuit boards.",
publisher = "Bor : Mining and Metallurgy Institute",
journal = "Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor",
title = "Application of mineral processing methods in recycling the waste printed circuit board",
pages = "50-47",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6646"
}

Magdalinović, S., Dimitrijević, S., Ivanović, A., Dimitrijević, S.,& Đorđievski, S.. (2022). Application of mineral processing methods in recycling the waste printed circuit board. in Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor
Bor : Mining and Metallurgy Institute., 47-50.
https://hdl.handle.net/21.15107/rcub_technorep_6646

Magdalinović S, Dimitrijević S, Ivanović A, Dimitrijević S, Đorđievski S. Application of mineral processing methods in recycling the waste printed circuit board. in Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor. 2022;:47-50.
https://hdl.handle.net/21.15107/rcub_technorep_6646 .

Magdalinović, Srđana, Dimitrijević, Silvana, Ivanović, Aleksandra, Dimitrijević, Stevan, Đorđievski, Stefan, "Application of mineral processing methods in recycling the waste printed circuit board" in Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor (2022):47-50,
https://hdl.handle.net/21.15107/rcub_technorep_6646 .

TY  - CONF
AU  - Dimitrijević, Silvana
AU  - Veličković, Suzana
AU  - Veljković, Filip
AU  - Alagić, Slađana
AU  - Dimitrijević, Stevan
AU  - Ivanović, Aleksandra
AU  - Ivanović, Saša
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6645
AB  - This work is aimed to characterize the gold complexes using the electron spray ionization (ESI), and atmospheric solids analysis probe (ASAP), tandem quadrupole mass spectrometer (TQD). It is demonstrated here that the use of the ASAP is more suitable than the ESI for a rapid analysis of the gold coatings in the solid and liquid state. The mass spectra indicate that mercaptotriazole and glycine can coordinate with the gold ion and to build complexes such as [Au-2MT-Gly] and [Au-2MT-2Gly].
PB  - Bor : Mining and Metallurgy Institute
C3  - Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor
T1  - CHARACTERIZATION OF THE GOLD MERCAPTOTRIAZOLE COMPLEX USING THE TANDEM QUADRUPOLE MASS SPECTROMETRY (TQD)
EP  - 172
SP  - 169
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6645
ER  - 

@conference{
author = "Dimitrijević, Silvana and Veličković, Suzana and Veljković, Filip and Alagić, Slađana and Dimitrijević, Stevan and Ivanović, Aleksandra and Ivanović, Saša",
year = "2022",
abstract = "This work is aimed to characterize the gold complexes using the electron spray ionization (ESI), and atmospheric solids analysis probe (ASAP), tandem quadrupole mass spectrometer (TQD). It is demonstrated here that the use of the ASAP is more suitable than the ESI for a rapid analysis of the gold coatings in the solid and liquid state. The mass spectra indicate that mercaptotriazole and glycine can coordinate with the gold ion and to build complexes such as [Au-2MT-Gly] and [Au-2MT-2Gly].",
publisher = "Bor : Mining and Metallurgy Institute",
journal = "Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor",
title = "CHARACTERIZATION OF THE GOLD MERCAPTOTRIAZOLE COMPLEX USING THE TANDEM QUADRUPOLE MASS SPECTROMETRY (TQD)",
pages = "172-169",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6645"
}

Dimitrijević, S., Veličković, S., Veljković, F., Alagić, S., Dimitrijević, S., Ivanović, A.,& Ivanović, S.. (2022). CHARACTERIZATION OF THE GOLD MERCAPTOTRIAZOLE COMPLEX USING THE TANDEM QUADRUPOLE MASS SPECTROMETRY (TQD). in Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor
Bor : Mining and Metallurgy Institute., 169-172.
https://hdl.handle.net/21.15107/rcub_technorep_6645

Dimitrijević S, Veličković S, Veljković F, Alagić S, Dimitrijević S, Ivanović A, Ivanović S. CHARACTERIZATION OF THE GOLD MERCAPTOTRIAZOLE COMPLEX USING THE TANDEM QUADRUPOLE MASS SPECTROMETRY (TQD). in Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor. 2022;:169-172.
https://hdl.handle.net/21.15107/rcub_technorep_6645 .

Dimitrijević, Silvana, Veličković, Suzana, Veljković, Filip, Alagić, Slađana, Dimitrijević, Stevan, Ivanović, Aleksandra, Ivanović, Saša, "CHARACTERIZATION OF THE GOLD MERCAPTOTRIAZOLE COMPLEX USING THE TANDEM QUADRUPOLE MASS SPECTROMETRY (TQD)" in Proceedings / 53rd International October Conference on Mining and Metallurgy - IOC 2022, 3 – 5 October 2022, Bor (2022):169-172,
https://hdl.handle.net/21.15107/rcub_technorep_6645 .

Stević, Z., Dimitrijević, S., Dimitrijević, S.,& Lekovski, S.. (2021). Razvoј hardvera i softvera za energetski efikasne računarom vođene peći za sinterovanje. in Tehnički fakultet u Boru, Univerzitet u Beogradu
Univerzitet u Beogradu, Tehnički fakultet u Boru..
https://hdl.handle.net/21.15107/rcub_technorep_6757

Stević Z, Dimitrijević S, Dimitrijević S, Lekovski S. Razvoј hardvera i softvera za energetski efikasne računarom vođene peći za sinterovanje. in Tehnički fakultet u Boru, Univerzitet u Beogradu. 2021;.
https://hdl.handle.net/21.15107/rcub_technorep_6757 .

Stević, Zoran, Dimitrijević, Stevan, Dimitrijević, Silvana, Lekovski, Sande, "Razvoј hardvera i softvera za energetski efikasne računarom vođene peći za sinterovanje" in Tehnički fakultet u Boru, Univerzitet u Beogradu (2021),
https://hdl.handle.net/21.15107/rcub_technorep_6757 .

TY  - JOUR
AU  - Dimitrijevic, Silvana B.
AU  - Velickovic, Suzana R.
AU  - Ivanovic, Aleksandra T.
AU  - Veljkovic, Filip M.
AU  - Jovanovic, Milan M.
AU  - Kamberović, Željko
AU  - Dimitrijević, Stevan
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4807
AB  - A cost-effective and simple hydrometallurgy procedure for recycling the diamond core drilling crowns by nitric acid leaching, followed by the sodium hydroxide leaching, has been developed. The effect of temperature, nitric acid/sodium hydroxide concentration, leaching time and stirring rate were studied. For the acid leaching process the optimal values for parameters were 60 degrees C, 1.0 M HNO3, 2.5 h, and 800 rpm. It has been noted that the key factors in the alkaline leaching process were temperature and NaOH concentration. For the alkaline leaching, the optimal parameters were 100 degrees C, 40% concentration of NaOH solution, and leaching time of 4 h. Identification and characterisation of products in all technological processes were performed by X-Ray Diffraction (XRD), scanning electron microscope using energy-dispersive X-ray spectroscopy (SEM-EDS), and laser desorption ionisation mass spectrometry (LDI-MS). The analysis of solutions in all phases was performed by inductively coupled plasma atomic emission spectroscopy (ICP-AES). The use of LDI-MS as a new approach to identify the products after phases in the recycling process was an important part of the study, and the results were consistent with the XRD analysis. The total tungsten recovery was over 95.6%, with a high purity of the obtained tungsten trioxide.
T2  - International Journal of Refractory Metals & Hard Materials
T1  - Recovery of tungsten trioxide from waste diamond core drilling crowns by nitric acid leaching
VL  - 101
DO  - 10.1016/j.ijrmhm.2021.105695
ER  - 

@article{
author = "Dimitrijevic, Silvana B. and Velickovic, Suzana R. and Ivanovic, Aleksandra T. and Veljkovic, Filip M. and Jovanovic, Milan M. and Kamberović, Željko and Dimitrijević, Stevan",
year = "2021",
abstract = "A cost-effective and simple hydrometallurgy procedure for recycling the diamond core drilling crowns by nitric acid leaching, followed by the sodium hydroxide leaching, has been developed. The effect of temperature, nitric acid/sodium hydroxide concentration, leaching time and stirring rate were studied. For the acid leaching process the optimal values for parameters were 60 degrees C, 1.0 M HNO3, 2.5 h, and 800 rpm. It has been noted that the key factors in the alkaline leaching process were temperature and NaOH concentration. For the alkaline leaching, the optimal parameters were 100 degrees C, 40% concentration of NaOH solution, and leaching time of 4 h. Identification and characterisation of products in all technological processes were performed by X-Ray Diffraction (XRD), scanning electron microscope using energy-dispersive X-ray spectroscopy (SEM-EDS), and laser desorption ionisation mass spectrometry (LDI-MS). The analysis of solutions in all phases was performed by inductively coupled plasma atomic emission spectroscopy (ICP-AES). The use of LDI-MS as a new approach to identify the products after phases in the recycling process was an important part of the study, and the results were consistent with the XRD analysis. The total tungsten recovery was over 95.6%, with a high purity of the obtained tungsten trioxide.",
journal = "International Journal of Refractory Metals & Hard Materials",
title = "Recovery of tungsten trioxide from waste diamond core drilling crowns by nitric acid leaching",
volume = "101",
doi = "10.1016/j.ijrmhm.2021.105695"
}

Dimitrijevic, S. B., Velickovic, S. R., Ivanovic, A. T., Veljkovic, F. M., Jovanovic, M. M., Kamberović, Ž.,& Dimitrijević, S.. (2021). Recovery of tungsten trioxide from waste diamond core drilling crowns by nitric acid leaching. in International Journal of Refractory Metals & Hard Materials, 101.
https://doi.org/10.1016/j.ijrmhm.2021.105695

Dimitrijevic SB, Velickovic SR, Ivanovic AT, Veljkovic FM, Jovanovic MM, Kamberović Ž, Dimitrijević S. Recovery of tungsten trioxide from waste diamond core drilling crowns by nitric acid leaching. in International Journal of Refractory Metals & Hard Materials. 2021;101.
doi:10.1016/j.ijrmhm.2021.105695 .

Dimitrijevic, Silvana B., Velickovic, Suzana R., Ivanovic, Aleksandra T., Veljkovic, Filip M., Jovanovic, Milan M., Kamberović, Željko, Dimitrijević, Stevan, "Recovery of tungsten trioxide from waste diamond core drilling crowns by nitric acid leaching" in International Journal of Refractory Metals & Hard Materials, 101 (2021),
https://doi.org/10.1016/j.ijrmhm.2021.105695 . .

TY  - CHAP
AU  - Dimitrijević, Silvana B.
AU  - Dimitrijević, Stevan P.
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6651
AB  - The importance of recycling the waste electrical and electronic equipment (WEEE), in recent years, has been taken into increasing concern and consideration not only by the government, but also by their hazardous material contents. Electronic waste can be defined as a mixture of various metals, particularly copper, aluminum and steel, with various types of plastics and ceramics. Recycling of electronic waste is an important subject not only from the point of waste treatment, but also from the recovery aspect of valuable materials. Pyrometallurgical processing has been a traditional technology for recovery of the precious metals from waste electronic equipment. In the past two decades, the most active research area on recovery of metals from electronic scraps is recovering the precious metals using the hydrometallurgical techniques. Compared with the pyrometallurgical processing, the hydrometallurgical method is more exact, more predictable and more easily controlled. In the last decade, the recovery of metals by biotechnology has been one of the most promising technologies. Biometallurgy has the potential for a major technology breakthrough for the materials and minerals industry due to a great interest shown by the major international companies for this new technology. Understanding the biochemical processes, involved in treatments of metals, has been the subject to growing investigations for the last 20 years. At present, the research and development are in progress for a number of metals such as copper, nickel, cobalt, zinc, gold and silver. However, the activity of leaching bacteria is applied for recovery of gold and silver only to remove the interfering metal sulfides from ore bearing the precious metals prior to the cyanidation treatment. Recent research trend is to use the combined methods for optimal results.
PB  - De Gruyter
T2  - Advanced Ceramics and Applications
T1  - E-scrap processing: Theory and practice
EP  - 262
SP  - 237
DO  - 10.1515/9783110627992-017
ER  - 

@inbook{
author = "Dimitrijević, Silvana B. and Dimitrijević, Stevan P.",
year = "2021",
abstract = "The importance of recycling the waste electrical and electronic equipment (WEEE), in recent years, has been taken into increasing concern and consideration not only by the government, but also by their hazardous material contents. Electronic waste can be defined as a mixture of various metals, particularly copper, aluminum and steel, with various types of plastics and ceramics. Recycling of electronic waste is an important subject not only from the point of waste treatment, but also from the recovery aspect of valuable materials. Pyrometallurgical processing has been a traditional technology for recovery of the precious metals from waste electronic equipment. In the past two decades, the most active research area on recovery of metals from electronic scraps is recovering the precious metals using the hydrometallurgical techniques. Compared with the pyrometallurgical processing, the hydrometallurgical method is more exact, more predictable and more easily controlled. In the last decade, the recovery of metals by biotechnology has been one of the most promising technologies. Biometallurgy has the potential for a major technology breakthrough for the materials and minerals industry due to a great interest shown by the major international companies for this new technology. Understanding the biochemical processes, involved in treatments of metals, has been the subject to growing investigations for the last 20 years. At present, the research and development are in progress for a number of metals such as copper, nickel, cobalt, zinc, gold and silver. However, the activity of leaching bacteria is applied for recovery of gold and silver only to remove the interfering metal sulfides from ore bearing the precious metals prior to the cyanidation treatment. Recent research trend is to use the combined methods for optimal results.",
publisher = "De Gruyter",
journal = "Advanced Ceramics and Applications",
booktitle = "E-scrap processing: Theory and practice",
pages = "262-237",
doi = "10.1515/9783110627992-017"
}

Dimitrijević, S. B.,& Dimitrijević, S. P.. (2021). E-scrap processing: Theory and practice. in Advanced Ceramics and Applications
De Gruyter., 237-262.
https://doi.org/10.1515/9783110627992-017

Dimitrijević SB, Dimitrijević SP. E-scrap processing: Theory and practice. in Advanced Ceramics and Applications. 2021;:237-262.
doi:10.1515/9783110627992-017 .

Dimitrijević, Silvana B., Dimitrijević, Stevan P., "E-scrap processing: Theory and practice" in Advanced Ceramics and Applications (2021):237-262,
https://doi.org/10.1515/9783110627992-017 . .

TY  - JOUR
AU  - Dimitrijevic, Silvana B.
AU  - Alagic, Sladana
AU  - Pavlovic, Sonja
AU  - Stankovic, Biljana
AU  - Kotur, Nikola
AU  - Ivanovic, Aleksandra
AU  - Dimitrijević, Stevan
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4822
AB  - The study presents the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay results on human erythroleukemia K562 cell line to compare the toxicity of electrolytes based on the mercaptotriazole gold complex (Au-MT) and gold potassium cyanide. Solutions immediately after mixing and after three months at different concentrations were compared, with a prolonged aging period, to a year, for the electrolytes at pH = 9. Lower toxicity of new organic gold complex at pH = 4, 7, and 12 than of alkaline cyanide electrolyte, but higher at pH = 2, was determined. The solution of the Au-MT at pH = 9 had comparable, but lower cell toxicity in the whole investigated period.
T2  - Journal of the Indian Chemical Society
T1  - Cytotoxicity of the gold complex based on mercaptotriazole - A comparison with the conventional cyanide electrolyte
IS  - 11
VL  - 98
DO  - 10.1016/j.jics.2021.100219
ER  - 

@article{
author = "Dimitrijevic, Silvana B. and Alagic, Sladana and Pavlovic, Sonja and Stankovic, Biljana and Kotur, Nikola and Ivanovic, Aleksandra and Dimitrijević, Stevan",
year = "2021",
abstract = "The study presents the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay results on human erythroleukemia K562 cell line to compare the toxicity of electrolytes based on the mercaptotriazole gold complex (Au-MT) and gold potassium cyanide. Solutions immediately after mixing and after three months at different concentrations were compared, with a prolonged aging period, to a year, for the electrolytes at pH = 9. Lower toxicity of new organic gold complex at pH = 4, 7, and 12 than of alkaline cyanide electrolyte, but higher at pH = 2, was determined. The solution of the Au-MT at pH = 9 had comparable, but lower cell toxicity in the whole investigated period.",
journal = "Journal of the Indian Chemical Society",
title = "Cytotoxicity of the gold complex based on mercaptotriazole - A comparison with the conventional cyanide electrolyte",
number = "11",
volume = "98",
doi = "10.1016/j.jics.2021.100219"
}

Dimitrijevic, S. B., Alagic, S., Pavlovic, S., Stankovic, B., Kotur, N., Ivanovic, A.,& Dimitrijević, S.. (2021). Cytotoxicity of the gold complex based on mercaptotriazole - A comparison with the conventional cyanide electrolyte. in Journal of the Indian Chemical Society, 98(11).
https://doi.org/10.1016/j.jics.2021.100219

Dimitrijevic SB, Alagic S, Pavlovic S, Stankovic B, Kotur N, Ivanovic A, Dimitrijević S. Cytotoxicity of the gold complex based on mercaptotriazole - A comparison with the conventional cyanide electrolyte. in Journal of the Indian Chemical Society. 2021;98(11).
doi:10.1016/j.jics.2021.100219 .

Dimitrijevic, Silvana B., Alagic, Sladana, Pavlovic, Sonja, Stankovic, Biljana, Kotur, Nikola, Ivanovic, Aleksandra, Dimitrijević, Stevan, "Cytotoxicity of the gold complex based on mercaptotriazole - A comparison with the conventional cyanide electrolyte" in Journal of the Indian Chemical Society, 98, no. 11 (2021),
https://doi.org/10.1016/j.jics.2021.100219 . .

TY  - JOUR
AU  - Stevanović, Dimitrije
AU  - Dimitrijević, Stevan
AU  - Kamberović, Željko
AU  - Parežanin, Vladimir
AU  - Dimitrijević, Silvana
PY  - 2021
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5
AB  - This study addresses the influence of heat treatment and alumina coating on the corrosion of EN 1.4713 steel in 0.1 mol dm(-3) sulfuric acid. The corrosion characteristics of three different samples are examined using the open circuit potential measurements, Tafel extrapolation, linear polarization resistance, weight-loss method, and electrochemical impedance spectroscopy. The results showed that the application of the weight-loss method yielded similar values to the electrochemical method in the first 24 h. A decrease in corrosion rate, in a similar manner, was observed for all three samples. The largest deacceleration was obtained for the alumina/titania-coated sample. It was obtained that the heat treatment significantly increased the corrosion resistance, but only in the first 24 h. The alumina/titania coating decreases the corrosion rate by approximately 30 times at the beginning of the corrosion exposure and by nearly 300 times after 240 h. This coating could have a significant influence on construction design, which uses ferritic stainless steel as the material.
PB  - John Wiley and Sons Inc.
T2  - Materials and Corrosion
T1  - Improvement of the corrosion characteristics of 1.4713 ferritic steel in 0.1 M sulfuric acid by heat treatment and Al2O3-TiO2 coating
EP  - 1020
IS  - 6
SP  - 1010
VL  - 72
DO  - 10.1002/maco.202012197
ER  - 

@article{
author = "Stevanović, Dimitrije and Dimitrijević, Stevan and Kamberović, Željko and Parežanin, Vladimir and Dimitrijević, Silvana",
year = "2021",
abstract = "This study addresses the influence of heat treatment and alumina coating on the corrosion of EN 1.4713 steel in 0.1 mol dm(-3) sulfuric acid. The corrosion characteristics of three different samples are examined using the open circuit potential measurements, Tafel extrapolation, linear polarization resistance, weight-loss method, and electrochemical impedance spectroscopy. The results showed that the application of the weight-loss method yielded similar values to the electrochemical method in the first 24 h. A decrease in corrosion rate, in a similar manner, was observed for all three samples. The largest deacceleration was obtained for the alumina/titania-coated sample. It was obtained that the heat treatment significantly increased the corrosion resistance, but only in the first 24 h. The alumina/titania coating decreases the corrosion rate by approximately 30 times at the beginning of the corrosion exposure and by nearly 300 times after 240 h. This coating could have a significant influence on construction design, which uses ferritic stainless steel as the material.",
publisher = "John Wiley and Sons Inc.",
journal = "Materials and Corrosion",
title = "Improvement of the corrosion characteristics of 1.4713 ferritic steel in 0.1 M sulfuric acid by heat treatment and Al2O3-TiO2 coating",
pages = "1020-1010",
number = "6",
volume = "72",
doi = "10.1002/maco.202012197"
}

Stevanović, D., Dimitrijević, S., Kamberović, Ž., Parežanin, V.,& Dimitrijević, S.. (2021). Improvement of the corrosion characteristics of 1.4713 ferritic steel in 0.1 M sulfuric acid by heat treatment and Al2O3-TiO2 coating. in Materials and Corrosion
John Wiley and Sons Inc.., 72(6), 1010-1020.
https://doi.org/10.1002/maco.202012197

Stevanović D, Dimitrijević S, Kamberović Ž, Parežanin V, Dimitrijević S. Improvement of the corrosion characteristics of 1.4713 ferritic steel in 0.1 M sulfuric acid by heat treatment and Al2O3-TiO2 coating. in Materials and Corrosion. 2021;72(6):1010-1020.
doi:10.1002/maco.202012197 .

Stevanović, Dimitrije, Dimitrijević, Stevan, Kamberović, Željko, Parežanin, Vladimir, Dimitrijević, Silvana, "Improvement of the corrosion characteristics of 1.4713 ferritic steel in 0.1 M sulfuric acid by heat treatment and Al2O3-TiO2 coating" in Materials and Corrosion, 72, no. 6 (2021):1010-1020,
https://doi.org/10.1002/maco.202012197 . .

TY  - JOUR
AU  - Dimitrijević, Stevan
AU  - Miliciani, Michele
AU  - Dimitrijević, Silvana
AU  - Ranitović, Milisav
AU  - Kamberović, Željko
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4387
AB  - Silver nitrate in the solution was reduced in the presence of the dispersants by ascorbic acid, and silver particles were generated. The main goal was to examine the influence of different dispersants. The purpose was to improve the production process of the micro-sized silver powder for thick film silver pastes for applications in the photovoltaic sector and the printed electronics. Relatively high concentrations of the reagents were used to achieve a high yield of silver particles. It was a strict request for highly economic production. This paper shows the possibilities for future large-scale synthesis and potential industrial production. The particles were analyzed by the X-ray diffraction (XRD), scanning electron microscopy (SEM), and laser diffraction particle size analyzer.
PB  - Savez inženjera metalurgije Srbije, Beograd
T2  - Metallurgical & Materials Engineering
T1  - Production of sub-micro sized silver particles by chemical reduction method in an environmentally-friendly manner
EP  - 235
IS  - 2
SP  - 223
VL  - 26
DO  - 10.30544/478
ER  - 

@article{
author = "Dimitrijević, Stevan and Miliciani, Michele and Dimitrijević, Silvana and Ranitović, Milisav and Kamberović, Željko",
year = "2020",
abstract = "Silver nitrate in the solution was reduced in the presence of the dispersants by ascorbic acid, and silver particles were generated. The main goal was to examine the influence of different dispersants. The purpose was to improve the production process of the micro-sized silver powder for thick film silver pastes for applications in the photovoltaic sector and the printed electronics. Relatively high concentrations of the reagents were used to achieve a high yield of silver particles. It was a strict request for highly economic production. This paper shows the possibilities for future large-scale synthesis and potential industrial production. The particles were analyzed by the X-ray diffraction (XRD), scanning electron microscopy (SEM), and laser diffraction particle size analyzer.",
publisher = "Savez inženjera metalurgije Srbije, Beograd",
journal = "Metallurgical & Materials Engineering",
title = "Production of sub-micro sized silver particles by chemical reduction method in an environmentally-friendly manner",
pages = "235-223",
number = "2",
volume = "26",
doi = "10.30544/478"
}

Dimitrijević, S., Miliciani, M., Dimitrijević, S., Ranitović, M.,& Kamberović, Ž.. (2020). Production of sub-micro sized silver particles by chemical reduction method in an environmentally-friendly manner. in Metallurgical & Materials Engineering
Savez inženjera metalurgije Srbije, Beograd., 26(2), 223-235.
https://doi.org/10.30544/478

Dimitrijević S, Miliciani M, Dimitrijević S, Ranitović M, Kamberović Ž. Production of sub-micro sized silver particles by chemical reduction method in an environmentally-friendly manner. in Metallurgical & Materials Engineering. 2020;26(2):223-235.
doi:10.30544/478 .

Dimitrijević, Stevan, Miliciani, Michele, Dimitrijević, Silvana, Ranitović, Milisav, Kamberović, Željko, "Production of sub-micro sized silver particles by chemical reduction method in an environmentally-friendly manner" in Metallurgical & Materials Engineering, 26, no. 2 (2020):223-235,
https://doi.org/10.30544/478 . .

TY  - JOUR
AU  - Dimitrijević, Stevan
AU  - Vurdelja, Borislava D.
AU  - Dimitrijević, Silvana
AU  - Veljković, Filip M.
AU  - Kamberović, Željko
AU  - Veličković, Suzana
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4456
AB  - Corrosion products formed on the surface of two silver brazing alloys after the potentiostatic polarization in 3.5% sodium chloride solution were characterized by the standard methods such as, the X-ray diffraction, microRaman spectroscopy, and scanning electron microscopy with energy-dispersive spectroscopy. This paper presents the results of a laser desorption/ionization mass spectrometry (LDI MS) analysis as a new approach to the characterization of corrosion products. The potential of the anodic polarization was 0.5 V versus saturated calomel electrode, and the process duration was 300 s. The corrosion layers on both investigated alloys were similar in composition with cuprous chloride and silver chloride as the main components and had strong indications of cuprous oxide formation. The major difference between these two layers was the existence of zinc hydroxychioride as the corrosion product of Ag-Cu-Zn alloy. Palladium compounds were not found in the case of Ag-Cu-Pd alloy. The results of different methods have shown a good consistency. Complementarity between the used methods was useful in the interpretation of the results for each used method. This study has demonstrated that LDI MS can be used as an efficient additional method together with the traditional ones.
PB  - Walter de Gruyter Gmbh, Berlin
T2  - Corrosion Reviews
T1  - Complementary methods for characterization of the corrosion products on the surface of Ag60Cu26Zn14 and Ag58.5Cu31.5Pd10 brazing alloys
EP  - 125
IS  - 2
SP  - 111
VL  - 38
DO  - 10.1515/corrrev-2019-0067
ER  - 

@article{
author = "Dimitrijević, Stevan and Vurdelja, Borislava D. and Dimitrijević, Silvana and Veljković, Filip M. and Kamberović, Željko and Veličković, Suzana",
year = "2020",
abstract = "Corrosion products formed on the surface of two silver brazing alloys after the potentiostatic polarization in 3.5% sodium chloride solution were characterized by the standard methods such as, the X-ray diffraction, microRaman spectroscopy, and scanning electron microscopy with energy-dispersive spectroscopy. This paper presents the results of a laser desorption/ionization mass spectrometry (LDI MS) analysis as a new approach to the characterization of corrosion products. The potential of the anodic polarization was 0.5 V versus saturated calomel electrode, and the process duration was 300 s. The corrosion layers on both investigated alloys were similar in composition with cuprous chloride and silver chloride as the main components and had strong indications of cuprous oxide formation. The major difference between these two layers was the existence of zinc hydroxychioride as the corrosion product of Ag-Cu-Zn alloy. Palladium compounds were not found in the case of Ag-Cu-Pd alloy. The results of different methods have shown a good consistency. Complementarity between the used methods was useful in the interpretation of the results for each used method. This study has demonstrated that LDI MS can be used as an efficient additional method together with the traditional ones.",
publisher = "Walter de Gruyter Gmbh, Berlin",
journal = "Corrosion Reviews",
title = "Complementary methods for characterization of the corrosion products on the surface of Ag60Cu26Zn14 and Ag58.5Cu31.5Pd10 brazing alloys",
pages = "125-111",
number = "2",
volume = "38",
doi = "10.1515/corrrev-2019-0067"
}

Dimitrijević, S., Vurdelja, B. D., Dimitrijević, S., Veljković, F. M., Kamberović, Ž.,& Veličković, S.. (2020). Complementary methods for characterization of the corrosion products on the surface of Ag60Cu26Zn14 and Ag58.5Cu31.5Pd10 brazing alloys. in Corrosion Reviews
Walter de Gruyter Gmbh, Berlin., 38(2), 111-125.
https://doi.org/10.1515/corrrev-2019-0067

Dimitrijević S, Vurdelja BD, Dimitrijević S, Veljković FM, Kamberović Ž, Veličković S. Complementary methods for characterization of the corrosion products on the surface of Ag60Cu26Zn14 and Ag58.5Cu31.5Pd10 brazing alloys. in Corrosion Reviews. 2020;38(2):111-125.
doi:10.1515/corrrev-2019-0067 .

Dimitrijević, Stevan, Vurdelja, Borislava D., Dimitrijević, Silvana, Veljković, Filip M., Kamberović, Željko, Veličković, Suzana, "Complementary methods for characterization of the corrosion products on the surface of Ag60Cu26Zn14 and Ag58.5Cu31.5Pd10 brazing alloys" in Corrosion Reviews, 38, no. 2 (2020):111-125,
https://doi.org/10.1515/corrrev-2019-0067 . .

TY  - CONF
AU  - Dimitrijević, Stevan
AU  - Kamberović, Željko
AU  - Stevanović, Dimitrije
AU  - Dimitrijević, Silvana
AU  - Korać, Marija
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6851
AB  - The results of experimental studies of the effect of the plasma sprayed alumina coating on the improved corrosion resistance of the heat-resistant ferritic
stainless steel (W.Nr. 1.4713, EN X10CrAlSi7) in the sulfuric acid are presented in
this research. In this investigation, the plasma spray process was employed on the
substrate of ferritic stainless steel with deposition of Al2O3 ceramic coatings with Ni5%Al as a bond layer. Two different coating thicknesses of 0.3 mm and 0.5 mm
were tested. The investigation was performed by electrochemical characterization
and weight loss method. Electrochemical characterization of corrosion behavior of
steel with and without ceramic coating was performed by: the open circuit potential
measurement (OCP), the linear polarization resistance (LRP) method, and the
Tafel extrapolation method. All electrochemical measurements were performed in
the sulfuric acid with a concentration of 0.25 mol/dm3
(pH  1.00). Weight loss
method was performed with a duration of 240 h in the 38 wt.% sulfuric acid. Corrosion current densities obtained by electrochemical methods with the coatings were
between 3 and 4 % of the values of the samples without coatings. Nearly the same
results were obtained with the weight loss method. In both cases, these values are
similar to the porosity of the coatings.
PB  - Belgrade : Association of Metallurgical Engineers of Serbia (AMES)
C3  - Book of Abstracts / Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), June 5-7, 2019, Belgrade, Serbia
T1  - Effect of alumina coatings on corrosion behavior of X10CrAlSi7 steel in sulfuric acid
SP  - 54
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6851
ER  - 

@conference{
author = "Dimitrijević, Stevan and Kamberović, Željko and Stevanović, Dimitrije and Dimitrijević, Silvana and Korać, Marija",
year = "2019",
abstract = "The results of experimental studies of the effect of the plasma sprayed alumina coating on the improved corrosion resistance of the heat-resistant ferritic
stainless steel (W.Nr. 1.4713, EN X10CrAlSi7) in the sulfuric acid are presented in
this research. In this investigation, the plasma spray process was employed on the
substrate of ferritic stainless steel with deposition of Al2O3 ceramic coatings with Ni5%Al as a bond layer. Two different coating thicknesses of 0.3 mm and 0.5 mm
were tested. The investigation was performed by electrochemical characterization
and weight loss method. Electrochemical characterization of corrosion behavior of
steel with and without ceramic coating was performed by: the open circuit potential
measurement (OCP), the linear polarization resistance (LRP) method, and the
Tafel extrapolation method. All electrochemical measurements were performed in
the sulfuric acid with a concentration of 0.25 mol/dm3
(pH  1.00). Weight loss
method was performed with a duration of 240 h in the 38 wt.% sulfuric acid. Corrosion current densities obtained by electrochemical methods with the coatings were
between 3 and 4 % of the values of the samples without coatings. Nearly the same
results were obtained with the weight loss method. In both cases, these values are
similar to the porosity of the coatings.",
publisher = "Belgrade : Association of Metallurgical Engineers of Serbia (AMES)",
journal = "Book of Abstracts / Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), June 5-7, 2019, Belgrade, Serbia",
title = "Effect of alumina coatings on corrosion behavior of X10CrAlSi7 steel in sulfuric acid",
pages = "54",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6851"
}

Dimitrijević, S., Kamberović, Ž., Stevanović, D., Dimitrijević, S.,& Korać, M.. (2019). Effect of alumina coatings on corrosion behavior of X10CrAlSi7 steel in sulfuric acid. in Book of Abstracts / Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), June 5-7, 2019, Belgrade, Serbia
Belgrade : Association of Metallurgical Engineers of Serbia (AMES)., 54.
https://hdl.handle.net/21.15107/rcub_technorep_6851

Dimitrijević S, Kamberović Ž, Stevanović D, Dimitrijević S, Korać M. Effect of alumina coatings on corrosion behavior of X10CrAlSi7 steel in sulfuric acid. in Book of Abstracts / Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), June 5-7, 2019, Belgrade, Serbia. 2019;:54.
https://hdl.handle.net/21.15107/rcub_technorep_6851 .

Dimitrijević, Stevan, Kamberović, Željko, Stevanović, Dimitrije, Dimitrijević, Silvana, Korać, Marija, "Effect of alumina coatings on corrosion behavior of X10CrAlSi7 steel in sulfuric acid" in Book of Abstracts / Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), June 5-7, 2019, Belgrade, Serbia (2019):54,
https://hdl.handle.net/21.15107/rcub_technorep_6851 .

TY  - JOUR
AU  - Dimitrijević, Silvana B.
AU  - Alagić, Slađana Č.
AU  - Rajčić-Vujasinović, Mirjana M.
AU  - Dimitrijević, Stevan P.
AU  - Ivanović, Aleksandra T.
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5898
AB  - The aim of this study was a characterization of the crystals of gold complexes based on mercaptotrazole, obtained from solutions with different pH values (2, 4, 7, and 9), using the methods of infrared (IR) and Raman spectroscopy. Both methods provided very useful information on the investigated systems and signalized existence of the Au-S bond in the complexes obtained at pH = 2 and 9. Recorded spectra clearly illustrated the changes that occur in the systems as a consequence of pH change. At the same time, the results also showed that the pyrrole nitrogen atoms stay protonated at pH = 9, which is not in favor of the assumption evolved from the previous UV-vis analysis of possible additional coordination between Au and possible deprotonated nitrogen atoms at this particular pH.
PB  - Bulgarian Academy of Sciences
T2  - Bulgarian Chemical Communications
T1  - IR/Raman characterization of Au-mercaptotriazole crystals
EP  - 364
IS  - 3
SP  - 358
VL  - 51
DO  - 10.34049/bcc.51.3.5003
ER  - 

@article{
author = "Dimitrijević, Silvana B. and Alagić, Slađana Č. and Rajčić-Vujasinović, Mirjana M. and Dimitrijević, Stevan P. and Ivanović, Aleksandra T.",
year = "2019",
abstract = "The aim of this study was a characterization of the crystals of gold complexes based on mercaptotrazole, obtained from solutions with different pH values (2, 4, 7, and 9), using the methods of infrared (IR) and Raman spectroscopy. Both methods provided very useful information on the investigated systems and signalized existence of the Au-S bond in the complexes obtained at pH = 2 and 9. Recorded spectra clearly illustrated the changes that occur in the systems as a consequence of pH change. At the same time, the results also showed that the pyrrole nitrogen atoms stay protonated at pH = 9, which is not in favor of the assumption evolved from the previous UV-vis analysis of possible additional coordination between Au and possible deprotonated nitrogen atoms at this particular pH.",
publisher = "Bulgarian Academy of Sciences",
journal = "Bulgarian Chemical Communications",
title = "IR/Raman characterization of Au-mercaptotriazole crystals",
pages = "364-358",
number = "3",
volume = "51",
doi = "10.34049/bcc.51.3.5003"
}

Dimitrijević, S. B., Alagić, S. Č., Rajčić-Vujasinović, M. M., Dimitrijević, S. P.,& Ivanović, A. T.. (2019). IR/Raman characterization of Au-mercaptotriazole crystals. in Bulgarian Chemical Communications
Bulgarian Academy of Sciences., 51(3), 358-364.
https://doi.org/10.34049/bcc.51.3.5003

Dimitrijević SB, Alagić SČ, Rajčić-Vujasinović MM, Dimitrijević SP, Ivanović AT. IR/Raman characterization of Au-mercaptotriazole crystals. in Bulgarian Chemical Communications. 2019;51(3):358-364.
doi:10.34049/bcc.51.3.5003 .

Dimitrijević, Silvana B., Alagić, Slađana Č., Rajčić-Vujasinović, Mirjana M., Dimitrijević, Stevan P., Ivanović, Aleksandra T., "IR/Raman characterization of Au-mercaptotriazole crystals" in Bulgarian Chemical Communications, 51, no. 3 (2019):358-364,
https://doi.org/10.34049/bcc.51.3.5003 . .