Radulović, Aleksandra

Link to this page

Authority KeyName Variants
0eb7297c-0155-40b1-ace9-cea93f7707f1
  • Radulović, Aleksandra (2)
  • Radulović, Aleksandra M. (1)
Projects

Author's Bibliography

Insight and Comparison of Property Improvement in LTA and MFI Zeolite Reinforced Poly(methacrylic acid) Highly Concentrated Composite Hydrogels

Panić, Vesna V.; Jovanović, Jelena D.; Savić, Sanja I.; Marković, Maja D.; Radulović, Aleksandra M.; Pantić, Olga; Adnađević, Borivoj K.

(Yuktan Technologies, 2023)

TY  - CONF
AU  - Panić, Vesna V.
AU  - Jovanović, Jelena D.
AU  - Savić, Sanja I.
AU  - Marković, Maja D.
AU  - Radulović, Aleksandra M.
AU  - Pantić, Olga
AU  - Adnađević, Borivoj K.
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6887
AB  - The preparation of zeolite rich polymeric materials presents a challenge due to the zeolite settling
during synthesis, poor miscibility, the phase separation and generally insufficient interactions
between polymers and zeolites. Combination of LTA, i.e. MFI, zeolite and poly(methacrylic acid) in the
form of soft hydrogel network provided the stabilization of the zeolite particles and enabled synthesis
of composite hydrogels with very high zeolite concentrations (26-52 mass%).
The investigated morphological, mechanical and primary structural properties, water swelling ability
and thermal stability revealed high dependence on zeolite concentration and type. Zeolite particles
were uniformly dispersed in PMAA matrix as confirmed by SEM and there was no agglomeration or
zeolite leaching despite very high concentrations. FTIR spectra disclosed the existence of functional
groups of PMAA network and both zeolite types that interacted mutually and led to increased
crosslinking density. The established interactions changed the PMAA chain dynamics around the
particles, especially of the LTA type, as showed by XRD. Having much more surface groups capable to
generate interaction with PMAA, LTA zeolite stronger affected all of the investigated properties.
Composites’ mechanics was improved both in dry and swollen state compared to the PMAA hydrogel
(up to 21.8 times for the sample with the highest LTA concentration). Thermal stability of the
composites increased with increasing zeolite concentration.
The composition-property correlations were determined making this work the base for further
development of tailor-made zeolite-PMAA composite hydrogels aimed for specific application.
Composites were tested as low-cost, regenerative, environmentally friendly sorbents and showed
better removal of cationic dye compared to both components (PMAA and zeolite) alone.
PB  - Yuktan Technologies
C3  - Abstract Book / 4th International Conference on Advanced Polymer Science and Engineering, 23-25 October, 2023, Valencia, Spain
T1  - Insight and Comparison of Property Improvement in LTA and MFI Zeolite Reinforced Poly(methacrylic acid) Highly Concentrated Composite Hydrogels
SP  - 67
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6887
ER  - 
@conference{
author = "Panić, Vesna V. and Jovanović, Jelena D. and Savić, Sanja I. and Marković, Maja D. and Radulović, Aleksandra M. and Pantić, Olga and Adnađević, Borivoj K.",
year = "2023",
abstract = "The preparation of zeolite rich polymeric materials presents a challenge due to the zeolite settling
during synthesis, poor miscibility, the phase separation and generally insufficient interactions
between polymers and zeolites. Combination of LTA, i.e. MFI, zeolite and poly(methacrylic acid) in the
form of soft hydrogel network provided the stabilization of the zeolite particles and enabled synthesis
of composite hydrogels with very high zeolite concentrations (26-52 mass%).
The investigated morphological, mechanical and primary structural properties, water swelling ability
and thermal stability revealed high dependence on zeolite concentration and type. Zeolite particles
were uniformly dispersed in PMAA matrix as confirmed by SEM and there was no agglomeration or
zeolite leaching despite very high concentrations. FTIR spectra disclosed the existence of functional
groups of PMAA network and both zeolite types that interacted mutually and led to increased
crosslinking density. The established interactions changed the PMAA chain dynamics around the
particles, especially of the LTA type, as showed by XRD. Having much more surface groups capable to
generate interaction with PMAA, LTA zeolite stronger affected all of the investigated properties.
Composites’ mechanics was improved both in dry and swollen state compared to the PMAA hydrogel
(up to 21.8 times for the sample with the highest LTA concentration). Thermal stability of the
composites increased with increasing zeolite concentration.
The composition-property correlations were determined making this work the base for further
development of tailor-made zeolite-PMAA composite hydrogels aimed for specific application.
Composites were tested as low-cost, regenerative, environmentally friendly sorbents and showed
better removal of cationic dye compared to both components (PMAA and zeolite) alone.",
publisher = "Yuktan Technologies",
journal = "Abstract Book / 4th International Conference on Advanced Polymer Science and Engineering, 23-25 October, 2023, Valencia, Spain",
title = "Insight and Comparison of Property Improvement in LTA and MFI Zeolite Reinforced Poly(methacrylic acid) Highly Concentrated Composite Hydrogels",
pages = "67",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6887"
}
Panić, V. V., Jovanović, J. D., Savić, S. I., Marković, M. D., Radulović, A. M., Pantić, O.,& Adnađević, B. K.. (2023). Insight and Comparison of Property Improvement in LTA and MFI Zeolite Reinforced Poly(methacrylic acid) Highly Concentrated Composite Hydrogels. in Abstract Book / 4th International Conference on Advanced Polymer Science and Engineering, 23-25 October, 2023, Valencia, Spain
Yuktan Technologies., 67.
https://hdl.handle.net/21.15107/rcub_technorep_6887
Panić VV, Jovanović JD, Savić SI, Marković MD, Radulović AM, Pantić O, Adnađević BK. Insight and Comparison of Property Improvement in LTA and MFI Zeolite Reinforced Poly(methacrylic acid) Highly Concentrated Composite Hydrogels. in Abstract Book / 4th International Conference on Advanced Polymer Science and Engineering, 23-25 October, 2023, Valencia, Spain. 2023;:67.
https://hdl.handle.net/21.15107/rcub_technorep_6887 .
Panić, Vesna V., Jovanović, Jelena D., Savić, Sanja I., Marković, Maja D., Radulović, Aleksandra M., Pantić, Olga, Adnađević, Borivoj K., "Insight and Comparison of Property Improvement in LTA and MFI Zeolite Reinforced Poly(methacrylic acid) Highly Concentrated Composite Hydrogels" in Abstract Book / 4th International Conference on Advanced Polymer Science and Engineering, 23-25 October, 2023, Valencia, Spain (2023):67,
https://hdl.handle.net/21.15107/rcub_technorep_6887 .

IN VITRO RELEASE AND (TRANS)DERMAL DELIVERY STUDY OF BLACKCURRANT ANTHOCYANINS INCORPORATED IN COSMETIC FORMULATION

Petrov Ivanković, Anja; Ćorović, Marija; Milivojević, Ana; Blagojević, Stevan; Radulović, Aleksandra; Pjanović, Rada; Bezbradica, Dejan

(Belgrade : University, Faculty of Technology and Metallurgy, 2023)

TY  - CONF
AU  - Petrov Ivanković, Anja
AU  - Ćorović, Marija
AU  - Milivojević, Ana
AU  - Blagojević, Stevan
AU  - Radulović, Aleksandra
AU  - Pjanović, Rada
AU  - Bezbradica, Dejan
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6947
AB  - Blackcurrant is anthocyanin-rich berry with proven antioxidant and photoprotective
activity and emerging prebiotic potential, widely applied in cosmetic products. Although
beneficial effects of its extract are well known, release from skin care products and
(trans)dermal permeation were not previously investigated.
In this study, enzyme-assisted extraction of polyphenols from lyophilized
blackcurrant was performed and obtained extract was incorporated into an Aristoflex® AVC
based hydrogel. Furthermore, Franz diffusion cell experiments were conducted in order to
examine the release of these molecules from the prepared formulation using cellulose acetate
membrane and transdermal and dermal delivery using human skin mimicking membrane
(Strat® M).
Obtained results revealed that all four dominant anthocyanins readily permeated from
hydrogel since 17.5%, 32.8%, 33.8% and 39.2% of delphinidin 3-glucoside, delphinidin 3-
rutinoside, cyanidin 3-glucoside and cyanidin 3-rutinoside, respectively, were detected in
receptor fluid after 24 h. Experimental values were successfully fitted with the Peppas and
Sahlin diffusion model. On the other hand, after 72 h long experiment with transdermal skin
diffusion model (Strat® M membrane), no detectable amounts of anthocyanins were present
in receptor fluid and only 0.5% of the initial quantity from donor compartment was extracted
from the membrane itself, indicating weak dermal delivery.
Present study revealed that hydrogel is suitable carrier system for the topical delivery
of bioactive anthocyanins from blackcurrant, while dermal and transdermal delivery of these
molecules is very limited. This implies applicability of blackcurrant extract for treatments
targeting skin surface (i.e. antioxidant, prebiotic, photoprotective).
PB  - Belgrade : University, Faculty of Technology and Metallurgy
C3  - Book of Abstracts / International Conference Biochemical Engineering and Biotechnology for Young Scientists, 7-8 December, 2023, Belgrade
T1  - IN VITRO RELEASE AND (TRANS)DERMAL DELIVERY STUDY OF BLACKCURRANT ANTHOCYANINS INCORPORATED IN COSMETIC FORMULATION
SP  - 30
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6947
ER  - 
@conference{
author = "Petrov Ivanković, Anja and Ćorović, Marija and Milivojević, Ana and Blagojević, Stevan and Radulović, Aleksandra and Pjanović, Rada and Bezbradica, Dejan",
year = "2023",
abstract = "Blackcurrant is anthocyanin-rich berry with proven antioxidant and photoprotective
activity and emerging prebiotic potential, widely applied in cosmetic products. Although
beneficial effects of its extract are well known, release from skin care products and
(trans)dermal permeation were not previously investigated.
In this study, enzyme-assisted extraction of polyphenols from lyophilized
blackcurrant was performed and obtained extract was incorporated into an Aristoflex® AVC
based hydrogel. Furthermore, Franz diffusion cell experiments were conducted in order to
examine the release of these molecules from the prepared formulation using cellulose acetate
membrane and transdermal and dermal delivery using human skin mimicking membrane
(Strat® M).
Obtained results revealed that all four dominant anthocyanins readily permeated from
hydrogel since 17.5%, 32.8%, 33.8% and 39.2% of delphinidin 3-glucoside, delphinidin 3-
rutinoside, cyanidin 3-glucoside and cyanidin 3-rutinoside, respectively, were detected in
receptor fluid after 24 h. Experimental values were successfully fitted with the Peppas and
Sahlin diffusion model. On the other hand, after 72 h long experiment with transdermal skin
diffusion model (Strat® M membrane), no detectable amounts of anthocyanins were present
in receptor fluid and only 0.5% of the initial quantity from donor compartment was extracted
from the membrane itself, indicating weak dermal delivery.
Present study revealed that hydrogel is suitable carrier system for the topical delivery
of bioactive anthocyanins from blackcurrant, while dermal and transdermal delivery of these
molecules is very limited. This implies applicability of blackcurrant extract for treatments
targeting skin surface (i.e. antioxidant, prebiotic, photoprotective).",
publisher = "Belgrade : University, Faculty of Technology and Metallurgy",
journal = "Book of Abstracts / International Conference Biochemical Engineering and Biotechnology for Young Scientists, 7-8 December, 2023, Belgrade",
title = "IN VITRO RELEASE AND (TRANS)DERMAL DELIVERY STUDY OF BLACKCURRANT ANTHOCYANINS INCORPORATED IN COSMETIC FORMULATION",
pages = "30",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6947"
}
Petrov Ivanković, A., Ćorović, M., Milivojević, A., Blagojević, S., Radulović, A., Pjanović, R.,& Bezbradica, D.. (2023). IN VITRO RELEASE AND (TRANS)DERMAL DELIVERY STUDY OF BLACKCURRANT ANTHOCYANINS INCORPORATED IN COSMETIC FORMULATION. in Book of Abstracts / International Conference Biochemical Engineering and Biotechnology for Young Scientists, 7-8 December, 2023, Belgrade
Belgrade : University, Faculty of Technology and Metallurgy., 30.
https://hdl.handle.net/21.15107/rcub_technorep_6947
Petrov Ivanković A, Ćorović M, Milivojević A, Blagojević S, Radulović A, Pjanović R, Bezbradica D. IN VITRO RELEASE AND (TRANS)DERMAL DELIVERY STUDY OF BLACKCURRANT ANTHOCYANINS INCORPORATED IN COSMETIC FORMULATION. in Book of Abstracts / International Conference Biochemical Engineering and Biotechnology for Young Scientists, 7-8 December, 2023, Belgrade. 2023;:30.
https://hdl.handle.net/21.15107/rcub_technorep_6947 .
Petrov Ivanković, Anja, Ćorović, Marija, Milivojević, Ana, Blagojević, Stevan, Radulović, Aleksandra, Pjanović, Rada, Bezbradica, Dejan, "IN VITRO RELEASE AND (TRANS)DERMAL DELIVERY STUDY OF BLACKCURRANT ANTHOCYANINS INCORPORATED IN COSMETIC FORMULATION" in Book of Abstracts / International Conference Biochemical Engineering and Biotechnology for Young Scientists, 7-8 December, 2023, Belgrade (2023):30,
https://hdl.handle.net/21.15107/rcub_technorep_6947 .

Poly(urethane-siloxane)s based on hyperbranched polyester as crosslinking agent: Synthesis and characterization

Pergal, Marija; Džunuzović, Jasna; Ostojić, Sanja; Pergal, Miodrag M.; Radulović, Aleksandra; Jovanovic, Slobodan

(Serbian Chemical Society, 2012)

TY  - JOUR
AU  - Pergal, Marija
AU  - Džunuzović, Jasna
AU  - Ostojić, Sanja
AU  - Pergal, Miodrag M.
AU  - Radulović, Aleksandra
AU  - Jovanovic, Slobodan
PY  - 2012
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5732
AB  - A series of novel polyurethane crosslinked structures (PUs) was prepared from α,ω-dihydroxy-(ethylene oxide-poly(dimethylsiloxane)-ethylene oxide) (EO-PDMS-EO), 4,4'-methylenediphenyl diisocyanate and Boltorn ® hyperbranched polyester of the third pseudo generation. The hydroxyfunctional hyperbranched aliphatic polyester with 26 end groups was used as a crosslinking agent. In order to improve the compatibility of all the reactants during the synthesis, the PU samples were prepared by two-stage, step-growth polymerization in solution. The content of the soft EO-PDMS-EO segments was varied in the range from 15 to 40 wt. %. The influence of the EO-PDMS-EO content on the swelling behavior, crosslink density, hardness, and the thermal and surface properties of the synthesized PUs was investigated. The structure of the synthesized polyurethanes was confirmed by the presence of specific bands in the Fourier transform infrared spectra. Swelling studies were performed to determine the crosslink density and polyurethane networks with lower EO-PDMS-EO contents had higher crosslink densities. The glass transition temperature of the synthesized PUs, determined by differential scanning calorimetry, slightly increased from 50 to 58°C on decreasing the EO-PDMS-EO content because of the higher crosslink density of the samples. Increasing the EO-PDMS-EO content led to better thermal stability, as was evidenced by the onset temperature of weight loss. The surface of the polyurethane networks became more hydrophobic with increasing EO-PDMS-EO content. The surface morphology of synthesized polyurethanes was analyzed by scanning electron microscopy.
AB  - U ovom radu prikazana je sinteza, struktura i neka svojstva novih umreženih poliuretana pripremljenih polazeći od α,ω-dihidroksi-(etilenoksid-poli(dimetilsiloksan)-etilenoksid) pretpolimera (EO-PDMS-EO), 4,4'-metilendifenildiizocijanata i Boltorn® hiperrazgranatog poliestra treće pseudo-generacije. Hiperrazgranati hidroksi funkcionalni alifatski poliestar sa 26 krajnjih grupa služio je kao umrežavajući agens pri sintezi poliuretana. U cilju poboljšanja kompatibilnosti reaktanata tokom sinteze, poliuretani su sintetisani dvostepenom polimerizacijom u rastvoru. Sadržaj mekog EO-PDMS-EO segmenta variran je u opsegu od 15 do 40 mas. %. Ispitan je uticaj EO-PDMS-EO sadržaja na ponašanje pri bubrenju, gustinu umrežavanja, tvrdoću, termička i površinska svojstva sintetisanih poliuretana. Struktura sintetisanih poliuretana potvrđena je FTIR spektroskopijom. Ponašanje pri bubrenju je ispitivano kako bi se odredila gustina umrežavanja i pokazano je da poliuretanske mreže sa nižim EO-PDMS-EO sadržajem imaju veću gustinu umrežavanja. Rezultati diferencijalne skenirajuće kalorimetrije pokazali su povećanje temperature ostakljivanja poliuretana od 50 do 58°C sa smanjenjem EO-PDMS-EO sadržaja kao posledicu veće gustine umreženosti uzoraka. Sintetisani poliuretani sa većim sadržajem EO-PDMS-EO segmenata pokazuju bolju termičku stabilnost, što je potvrđeno porastom početne temperature degradacije, određene TG analizom. Hidrofobnost površine poliuretana je rasla sa povećanjem sadržaja EO-PDMS-EO u odgovarajućem uzorku. Površinska morfologija sintetisanih poliuretana je analizirana skenirajućom elektronskom mikroskopijom.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Poly(urethane-siloxane)s based on hyperbranched polyester as crosslinking agent: Synthesis and characterization
T1  - Poli(uretan-siloksani) na bazi hiperrazgranatog poliestra kao umreživača - sinteza i karakterizacija
EP  - 935
IS  - 7
SP  - 919
VL  - 77
DO  - 10.2298/JSC111013006P
ER  - 
@article{
author = "Pergal, Marija and Džunuzović, Jasna and Ostojić, Sanja and Pergal, Miodrag M. and Radulović, Aleksandra and Jovanovic, Slobodan",
year = "2012",
abstract = "A series of novel polyurethane crosslinked structures (PUs) was prepared from α,ω-dihydroxy-(ethylene oxide-poly(dimethylsiloxane)-ethylene oxide) (EO-PDMS-EO), 4,4'-methylenediphenyl diisocyanate and Boltorn ® hyperbranched polyester of the third pseudo generation. The hydroxyfunctional hyperbranched aliphatic polyester with 26 end groups was used as a crosslinking agent. In order to improve the compatibility of all the reactants during the synthesis, the PU samples were prepared by two-stage, step-growth polymerization in solution. The content of the soft EO-PDMS-EO segments was varied in the range from 15 to 40 wt. %. The influence of the EO-PDMS-EO content on the swelling behavior, crosslink density, hardness, and the thermal and surface properties of the synthesized PUs was investigated. The structure of the synthesized polyurethanes was confirmed by the presence of specific bands in the Fourier transform infrared spectra. Swelling studies were performed to determine the crosslink density and polyurethane networks with lower EO-PDMS-EO contents had higher crosslink densities. The glass transition temperature of the synthesized PUs, determined by differential scanning calorimetry, slightly increased from 50 to 58°C on decreasing the EO-PDMS-EO content because of the higher crosslink density of the samples. Increasing the EO-PDMS-EO content led to better thermal stability, as was evidenced by the onset temperature of weight loss. The surface of the polyurethane networks became more hydrophobic with increasing EO-PDMS-EO content. The surface morphology of synthesized polyurethanes was analyzed by scanning electron microscopy., U ovom radu prikazana je sinteza, struktura i neka svojstva novih umreženih poliuretana pripremljenih polazeći od α,ω-dihidroksi-(etilenoksid-poli(dimetilsiloksan)-etilenoksid) pretpolimera (EO-PDMS-EO), 4,4'-metilendifenildiizocijanata i Boltorn® hiperrazgranatog poliestra treće pseudo-generacije. Hiperrazgranati hidroksi funkcionalni alifatski poliestar sa 26 krajnjih grupa služio je kao umrežavajući agens pri sintezi poliuretana. U cilju poboljšanja kompatibilnosti reaktanata tokom sinteze, poliuretani su sintetisani dvostepenom polimerizacijom u rastvoru. Sadržaj mekog EO-PDMS-EO segmenta variran je u opsegu od 15 do 40 mas. %. Ispitan je uticaj EO-PDMS-EO sadržaja na ponašanje pri bubrenju, gustinu umrežavanja, tvrdoću, termička i površinska svojstva sintetisanih poliuretana. Struktura sintetisanih poliuretana potvrđena je FTIR spektroskopijom. Ponašanje pri bubrenju je ispitivano kako bi se odredila gustina umrežavanja i pokazano je da poliuretanske mreže sa nižim EO-PDMS-EO sadržajem imaju veću gustinu umrežavanja. Rezultati diferencijalne skenirajuće kalorimetrije pokazali su povećanje temperature ostakljivanja poliuretana od 50 do 58°C sa smanjenjem EO-PDMS-EO sadržaja kao posledicu veće gustine umreženosti uzoraka. Sintetisani poliuretani sa većim sadržajem EO-PDMS-EO segmenata pokazuju bolju termičku stabilnost, što je potvrđeno porastom početne temperature degradacije, određene TG analizom. Hidrofobnost površine poliuretana je rasla sa povećanjem sadržaja EO-PDMS-EO u odgovarajućem uzorku. Površinska morfologija sintetisanih poliuretana je analizirana skenirajućom elektronskom mikroskopijom.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Poly(urethane-siloxane)s based on hyperbranched polyester as crosslinking agent: Synthesis and characterization, Poli(uretan-siloksani) na bazi hiperrazgranatog poliestra kao umreživača - sinteza i karakterizacija",
pages = "935-919",
number = "7",
volume = "77",
doi = "10.2298/JSC111013006P"
}
Pergal, M., Džunuzović, J., Ostojić, S., Pergal, M. M., Radulović, A.,& Jovanovic, S.. (2012). Poly(urethane-siloxane)s based on hyperbranched polyester as crosslinking agent: Synthesis and characterization. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 77(7), 919-935.
https://doi.org/10.2298/JSC111013006P
Pergal M, Džunuzović J, Ostojić S, Pergal MM, Radulović A, Jovanovic S. Poly(urethane-siloxane)s based on hyperbranched polyester as crosslinking agent: Synthesis and characterization. in Journal of the Serbian Chemical Society. 2012;77(7):919-935.
doi:10.2298/JSC111013006P .
Pergal, Marija, Džunuzović, Jasna, Ostojić, Sanja, Pergal, Miodrag M., Radulović, Aleksandra, Jovanovic, Slobodan, "Poly(urethane-siloxane)s based on hyperbranched polyester as crosslinking agent: Synthesis and characterization" in Journal of the Serbian Chemical Society, 77, no. 7 (2012):919-935,
https://doi.org/10.2298/JSC111013006P . .
15
13
18