TY  - JOUR
AU  - Lazouzi, Gamal
AU  - Vukićević, Nataša M.
AU  - Tomić, Nataša
AU  - Mitrić, Miodrag
AU  - Petrović, Miloš
AU  - Radojević, Vesna
AU  - Jančić-Heinemann, Radmila
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3960
AB  - Alumina based particles were prepared from aluminium chloride hydroxide as starting material by sol-gel technique. One series of particles was doped with ferrous oxide. Both series of particles were calcinated at three different temperatures: 700 degrees C, 800 degrees C and 900 degrees C. Poly(methyl methacrylate), PMMA, was used as a matrix and two different types of alumina based particles were added into the matrix to form the composites. All composites consisted of 3 wt% of alumina based particles. The aim of this study was to examine whether and how the temperature of particle calcination affects the microhardness and mechanical properties of the composite. The particles were characterized by the X-ray diffraction (XRD) and physical absorption methods. The morphology of the composites was examined using a field emission scanning electron microscope (FESEM). The microhardness of composites was measured using a traditional Vickers hardness (HV) method. The mechanical characteristics of obtained composites were determined using tensile test and impact testing.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Optimized preparation of alumina based fillers for tuning composite properties
EP  - 7449
IS  - 7
SP  - 7442
VL  - 44
DO  - 10.1016/j.ceramint.2018.01.083
ER  - 

@article{
author = "Lazouzi, Gamal and Vukićević, Nataša M. and Tomić, Nataša and Mitrić, Miodrag and Petrović, Miloš and Radojević, Vesna and Jančić-Heinemann, Radmila",
year = "2018",
abstract = "Alumina based particles were prepared from aluminium chloride hydroxide as starting material by sol-gel technique. One series of particles was doped with ferrous oxide. Both series of particles were calcinated at three different temperatures: 700 degrees C, 800 degrees C and 900 degrees C. Poly(methyl methacrylate), PMMA, was used as a matrix and two different types of alumina based particles were added into the matrix to form the composites. All composites consisted of 3 wt% of alumina based particles. The aim of this study was to examine whether and how the temperature of particle calcination affects the microhardness and mechanical properties of the composite. The particles were characterized by the X-ray diffraction (XRD) and physical absorption methods. The morphology of the composites was examined using a field emission scanning electron microscope (FESEM). The microhardness of composites was measured using a traditional Vickers hardness (HV) method. The mechanical characteristics of obtained composites were determined using tensile test and impact testing.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Optimized preparation of alumina based fillers for tuning composite properties",
pages = "7449-7442",
number = "7",
volume = "44",
doi = "10.1016/j.ceramint.2018.01.083"
}

Lazouzi, G., Vukićević, N. M., Tomić, N., Mitrić, M., Petrović, M., Radojević, V.,& Jančić-Heinemann, R.. (2018). Optimized preparation of alumina based fillers for tuning composite properties. in Ceramics International
Elsevier Sci Ltd, Oxford., 44(7), 7442-7449.
https://doi.org/10.1016/j.ceramint.2018.01.083

Lazouzi G, Vukićević NM, Tomić N, Mitrić M, Petrović M, Radojević V, Jančić-Heinemann R. Optimized preparation of alumina based fillers for tuning composite properties. in Ceramics International. 2018;44(7):7442-7449.
doi:10.1016/j.ceramint.2018.01.083 .

Lazouzi, Gamal, Vukićević, Nataša M., Tomić, Nataša, Mitrić, Miodrag, Petrović, Miloš, Radojević, Vesna, Jančić-Heinemann, Radmila, "Optimized preparation of alumina based fillers for tuning composite properties" in Ceramics International, 44, no. 7 (2018):7442-7449,
https://doi.org/10.1016/j.ceramint.2018.01.083 . .