TY  - JOUR
AU  - Hemer, Abubkr
AU  - Milović, Ljubica
AU  - Grbović, Aleksandar
AU  - Aleksić, Bojana
AU  - Aleksić, Vujadin
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4353
AB  - Most of the serious weldment failures lead to catastrophic consequences in terms of damage of other equipment, loss of production, and risks to workers' health and safety. Hence, there is motivation to find margin between safety and disaster. This necessitates guaranteeing the integrity of a welded structure even if a crack is present. Therefore, influence of the material inhomogeneity and residual stresses on deformation and fracture behavior needs to be described precisely. Fracture mechanics parameters J - integral and CTOD have attracted great interest in recent years. Two three point bending specimens of base metal (BM) and weld metal (WM) were tested according to standard BS EN ISO 15653. Than, a two dimensional finite element analysis was performed in Ansys Workbench software to calculate J-integral, and compare with experimental results. The aim of this work is to explore the possibility of using the test results in the reliable prediction of weldment fracture.
PB  - Pergamon-Elsevier Science Ltd, Oxford
T2  - Engineering Failure Analysis
T1  - Numerical determination and experimental validation of the fracture toughness of welded joints
VL  - 107
DO  - 10.1016/j.engfailanal.2019.104220
ER  - 

@article{
author = "Hemer, Abubkr and Milović, Ljubica and Grbović, Aleksandar and Aleksić, Bojana and Aleksić, Vujadin",
year = "2020",
abstract = "Most of the serious weldment failures lead to catastrophic consequences in terms of damage of other equipment, loss of production, and risks to workers' health and safety. Hence, there is motivation to find margin between safety and disaster. This necessitates guaranteeing the integrity of a welded structure even if a crack is present. Therefore, influence of the material inhomogeneity and residual stresses on deformation and fracture behavior needs to be described precisely. Fracture mechanics parameters J - integral and CTOD have attracted great interest in recent years. Two three point bending specimens of base metal (BM) and weld metal (WM) were tested according to standard BS EN ISO 15653. Than, a two dimensional finite element analysis was performed in Ansys Workbench software to calculate J-integral, and compare with experimental results. The aim of this work is to explore the possibility of using the test results in the reliable prediction of weldment fracture.",
publisher = "Pergamon-Elsevier Science Ltd, Oxford",
journal = "Engineering Failure Analysis",
title = "Numerical determination and experimental validation of the fracture toughness of welded joints",
volume = "107",
doi = "10.1016/j.engfailanal.2019.104220"
}

Hemer, A., Milović, L., Grbović, A., Aleksić, B.,& Aleksić, V.. (2020). Numerical determination and experimental validation of the fracture toughness of welded joints. in Engineering Failure Analysis
Pergamon-Elsevier Science Ltd, Oxford., 107.
https://doi.org/10.1016/j.engfailanal.2019.104220

Hemer A, Milović L, Grbović A, Aleksić B, Aleksić V. Numerical determination and experimental validation of the fracture toughness of welded joints. in Engineering Failure Analysis. 2020;107.
doi:10.1016/j.engfailanal.2019.104220 .

Hemer, Abubkr, Milović, Ljubica, Grbović, Aleksandar, Aleksić, Bojana, Aleksić, Vujadin, "Numerical determination and experimental validation of the fracture toughness of welded joints" in Engineering Failure Analysis, 107 (2020),
https://doi.org/10.1016/j.engfailanal.2019.104220 . .

TY  - JOUR
AU  - Aleksić, Vujadin
AU  - Aleksić, Bojana
AU  - Prodanović, Ana
AU  - Milović, Ljubica
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4572
AB  - In present paper, based on the results of the experimental study of the behaviour of the samples made of a HSLA steel, in the form of round smooth specimens (RSS) under LCF conditions (with controlled and completely reversible strain Δε/2 = const, Rε = εmin/εmax = −1, according to ISO 12106: 2003 (E)) and square specimens (SqS) under conditions of HCF conditions (with controlled one-way variable load on tension with σmin = const, according to ISO 12110-1:2013), a computational stress analysis was performed using the FE method and the behaviour of this steel in the fatigue behaviour simulation (LCF and HCF) in SolidWorks programme was shown. On the basis of the performed analysis of the results of the stress-strain state and the determination of the life using the life isolines for a particular load cycle involving the entire RSS ligament, i.e. SqS for a particular load in a wide range of LCF and HCF loads and comparison with the results of experimental tests, a figure i.e. graphical presentation was given and conclusions were drawn that justify the efforts for numerical assessment of the life cycle of the loaded machine parts.
PB  - International Conference on New Technologies, Development and Application, NT 2020
T2  - Lecture Notes in Networks and Systems
T1  - HSLA Steel - Simulation of Fatigue
EP  - 321
SP  - 314
VL  - 128 LNNS
DO  - 10.1007/978-3-030-46817-0_36
ER  - 

@article{
author = "Aleksić, Vujadin and Aleksić, Bojana and Prodanović, Ana and Milović, Ljubica",
year = "2020",
abstract = "In present paper, based on the results of the experimental study of the behaviour of the samples made of a HSLA steel, in the form of round smooth specimens (RSS) under LCF conditions (with controlled and completely reversible strain Δε/2 = const, Rε = εmin/εmax = −1, according to ISO 12106: 2003 (E)) and square specimens (SqS) under conditions of HCF conditions (with controlled one-way variable load on tension with σmin = const, according to ISO 12110-1:2013), a computational stress analysis was performed using the FE method and the behaviour of this steel in the fatigue behaviour simulation (LCF and HCF) in SolidWorks programme was shown. On the basis of the performed analysis of the results of the stress-strain state and the determination of the life using the life isolines for a particular load cycle involving the entire RSS ligament, i.e. SqS for a particular load in a wide range of LCF and HCF loads and comparison with the results of experimental tests, a figure i.e. graphical presentation was given and conclusions were drawn that justify the efforts for numerical assessment of the life cycle of the loaded machine parts.",
publisher = "International Conference on New Technologies, Development and Application, NT 2020",
journal = "Lecture Notes in Networks and Systems",
title = "HSLA Steel - Simulation of Fatigue",
pages = "321-314",
volume = "128 LNNS",
doi = "10.1007/978-3-030-46817-0_36"
}

Aleksić, V., Aleksić, B., Prodanović, A.,& Milović, L.. (2020). HSLA Steel - Simulation of Fatigue. in Lecture Notes in Networks and Systems
International Conference on New Technologies, Development and Application, NT 2020., 128 LNNS, 314-321.
https://doi.org/10.1007/978-3-030-46817-0_36

Aleksić V, Aleksić B, Prodanović A, Milović L. HSLA Steel - Simulation of Fatigue. in Lecture Notes in Networks and Systems. 2020;128 LNNS:314-321.
doi:10.1007/978-3-030-46817-0_36 .

Aleksić, Vujadin, Aleksić, Bojana, Prodanović, Ana, Milović, Ljubica, "HSLA Steel - Simulation of Fatigue" in Lecture Notes in Networks and Systems, 128 LNNS (2020):314-321,
https://doi.org/10.1007/978-3-030-46817-0_36 . .

TY  - JOUR
AU  - Aleksić, Bojana
AU  - Grbović, Aleksandar
AU  - Milović, Ljubica
AU  - Hemer, Abubkr
AU  - Aleksić, Vujadin
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4141
AB  - In order to prevent the premature failure of steam pipeline produced of molybdenum-vanadium steel, the experimental tests were performed to measure fracture toughness and to determine the mechanical behaviour of cracked pipes. A finite element method was used to calculate the fracture behaviour of the pressurized pipeline made of 14MoV6-3 steel based on the J-integral computation. The J-R curves were experimentally obtained by the elastic unloading compliance method for the single edge notched bend specimens and compared with those obtained using finite element method. A two dimensional finite element analysis was performed in Ansys Workbench software to determine the stress distribution and calculate J-integral values for the selected specimen geometry. Special attention was paid to the influence of applied boundary conditions on the accuracy of J-integral values, as well as to the influence of mesh density. It is shown that numerically obtained J-values significantly depend on the number of nodes used to apply displacements. However, if recommendations proposed in this paper are implemented, the accuracy of calculated values is satisfactory and successful failure analysis can be carried out. This approach can be useful in engineering applications where time saving and costs reducing are required.
PB  - Pergamon-Elsevier Science Ltd, Oxford
T2  - Engineering Failure Analysis
T1  - Numerical simulation of fatigue crack propagation: A case study of defected steam pipeline
SP  - 104165
VL  - 106
DO  - 10.1016/j.engfailanal.2019.104165
ER  - 

@article{
author = "Aleksić, Bojana and Grbović, Aleksandar and Milović, Ljubica and Hemer, Abubkr and Aleksić, Vujadin",
year = "2019",
abstract = "In order to prevent the premature failure of steam pipeline produced of molybdenum-vanadium steel, the experimental tests were performed to measure fracture toughness and to determine the mechanical behaviour of cracked pipes. A finite element method was used to calculate the fracture behaviour of the pressurized pipeline made of 14MoV6-3 steel based on the J-integral computation. The J-R curves were experimentally obtained by the elastic unloading compliance method for the single edge notched bend specimens and compared with those obtained using finite element method. A two dimensional finite element analysis was performed in Ansys Workbench software to determine the stress distribution and calculate J-integral values for the selected specimen geometry. Special attention was paid to the influence of applied boundary conditions on the accuracy of J-integral values, as well as to the influence of mesh density. It is shown that numerically obtained J-values significantly depend on the number of nodes used to apply displacements. However, if recommendations proposed in this paper are implemented, the accuracy of calculated values is satisfactory and successful failure analysis can be carried out. This approach can be useful in engineering applications where time saving and costs reducing are required.",
publisher = "Pergamon-Elsevier Science Ltd, Oxford",
journal = "Engineering Failure Analysis",
title = "Numerical simulation of fatigue crack propagation: A case study of defected steam pipeline",
pages = "104165",
volume = "106",
doi = "10.1016/j.engfailanal.2019.104165"
}

Aleksić, B., Grbović, A., Milović, L., Hemer, A.,& Aleksić, V.. (2019). Numerical simulation of fatigue crack propagation: A case study of defected steam pipeline. in Engineering Failure Analysis
Pergamon-Elsevier Science Ltd, Oxford., 106, 104165.
https://doi.org/10.1016/j.engfailanal.2019.104165

Aleksić B, Grbović A, Milović L, Hemer A, Aleksić V. Numerical simulation of fatigue crack propagation: A case study of defected steam pipeline. in Engineering Failure Analysis. 2019;106:104165.
doi:10.1016/j.engfailanal.2019.104165 .

Aleksić, Bojana, Grbović, Aleksandar, Milović, Ljubica, Hemer, Abubkr, Aleksić, Vujadin, "Numerical simulation of fatigue crack propagation: A case study of defected steam pipeline" in Engineering Failure Analysis, 106 (2019):104165,
https://doi.org/10.1016/j.engfailanal.2019.104165 . .

TY  - JOUR
AU  - Aleksić, Bojana
AU  - Grbović, Aleksandar
AU  - Milović, Ljubica
AU  - Hemer, Abubkr
AU  - Aleksić, Vujadin
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5034
AB  - In order to prevent the premature failure of steam pipeline produced of molybdenum-vanadium steel, the experimental tests were performed to measure fracture toughness and to determine the mechanical behaviour of cracked pipes. A finite element method was used to calculate the fracture behaviour of the pressurized pipeline made of 14MoV6-3 steel based on the J-integral computation. The J-R curves were experimentally obtained by the elastic unloading compliance method for the single edge notched bend specimens and compared with those obtained using finite element method. A two dimensional finite element analysis was performed in Ansys Workbench software to determine the stress distribution and calculate J-integral values for the selected specimen geometry. Special attention was paid to the influence of applied boundary conditions on the accuracy of J-integral values, as well as to the influence of mesh density. It is shown that numerically obtained J-values significantly depend on the number of nodes used to apply displacements. However, if recommendations proposed in this paper are implemented, the accuracy of calculated values is satisfactory and successful failure analysis can be carried out. This approach can be useful in engineering applications where time saving and costs reducing are required.
PB  - Elsevier Ltd
T2  - Engineering Failure Analysis
T1  - Numerical simulation of fatigue crack propagation: A case study of defected steam pipeline
SP  - 104165
VL  - 106
DO  - 10.1016/j.engfailanal.2019.104165
ER  - 

@article{
author = "Aleksić, Bojana and Grbović, Aleksandar and Milović, Ljubica and Hemer, Abubkr and Aleksić, Vujadin",
year = "2019",
abstract = "In order to prevent the premature failure of steam pipeline produced of molybdenum-vanadium steel, the experimental tests were performed to measure fracture toughness and to determine the mechanical behaviour of cracked pipes. A finite element method was used to calculate the fracture behaviour of the pressurized pipeline made of 14MoV6-3 steel based on the J-integral computation. The J-R curves were experimentally obtained by the elastic unloading compliance method for the single edge notched bend specimens and compared with those obtained using finite element method. A two dimensional finite element analysis was performed in Ansys Workbench software to determine the stress distribution and calculate J-integral values for the selected specimen geometry. Special attention was paid to the influence of applied boundary conditions on the accuracy of J-integral values, as well as to the influence of mesh density. It is shown that numerically obtained J-values significantly depend on the number of nodes used to apply displacements. However, if recommendations proposed in this paper are implemented, the accuracy of calculated values is satisfactory and successful failure analysis can be carried out. This approach can be useful in engineering applications where time saving and costs reducing are required.",
publisher = "Elsevier Ltd",
journal = "Engineering Failure Analysis",
title = "Numerical simulation of fatigue crack propagation: A case study of defected steam pipeline",
pages = "104165",
volume = "106",
doi = "10.1016/j.engfailanal.2019.104165"
}

Aleksić, B., Grbović, A., Milović, L., Hemer, A.,& Aleksić, V.. (2019). Numerical simulation of fatigue crack propagation: A case study of defected steam pipeline. in Engineering Failure Analysis
Elsevier Ltd., 106, 104165.
https://doi.org/10.1016/j.engfailanal.2019.104165

Aleksić B, Grbović A, Milović L, Hemer A, Aleksić V. Numerical simulation of fatigue crack propagation: A case study of defected steam pipeline. in Engineering Failure Analysis. 2019;106:104165.
doi:10.1016/j.engfailanal.2019.104165 .

Aleksić, Bojana, Grbović, Aleksandar, Milović, Ljubica, Hemer, Abubkr, Aleksić, Vujadin, "Numerical simulation of fatigue crack propagation: A case study of defected steam pipeline" in Engineering Failure Analysis, 106 (2019):104165,
https://doi.org/10.1016/j.engfailanal.2019.104165 . .

TY  - JOUR
AU  - Aleksić, Vujadin
AU  - Milović, Ljubica
AU  - Blačić, Ivo
AU  - Vuherer, Tomaz
AU  - Bulatović, Srđan
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4086
AB  - Numerous structural components made of high strength low-alloyed steels are often exposed to low-cycle fatigue loading during their exploitation life. In order to study the fatigue behavior of one grade of structural steels produced in Yugoslavia during the eighties of the last century, a push-pull constant amplitude strain-controlled fatigue tests were conducted at room temperatures. This paper analyses behavior of two different materials, parent steel (PM) and its coarse-grained (CG) simulated heat-affected zone (SHAZ) exposed to the action of low-cycle fatigue (LCF) loading performed in the range from 1 to 10(4) cycles. LCF tests were conducted at strain ratio R = -1 at strain amplitude range from 0.3% to 0.8%. The materials' Coffin-Manson parameters appearing in the strain-life and cyclic stress-strain curves were calculated. Fracture surface analysis of both materials was done. The results showed that plasticity under dynamic load conditions is satisfactory for both materials which give them good resistance to crack initiation and propagation.
PB  - Pergamon-Elsevier Science Ltd, Oxford
T2  - Engineering Failure Analysis
T1  - Effect of LCF on behavior and microstructure of microalloyed HSLA steel and its simulated CGHAZ
EP  - 1106
SP  - 1094
VL  - 104
DO  - 10.1016/j.engfailanal.2019.06.017
ER  - 

@article{
author = "Aleksić, Vujadin and Milović, Ljubica and Blačić, Ivo and Vuherer, Tomaz and Bulatović, Srđan",
year = "2019",
abstract = "Numerous structural components made of high strength low-alloyed steels are often exposed to low-cycle fatigue loading during their exploitation life. In order to study the fatigue behavior of one grade of structural steels produced in Yugoslavia during the eighties of the last century, a push-pull constant amplitude strain-controlled fatigue tests were conducted at room temperatures. This paper analyses behavior of two different materials, parent steel (PM) and its coarse-grained (CG) simulated heat-affected zone (SHAZ) exposed to the action of low-cycle fatigue (LCF) loading performed in the range from 1 to 10(4) cycles. LCF tests were conducted at strain ratio R = -1 at strain amplitude range from 0.3% to 0.8%. The materials' Coffin-Manson parameters appearing in the strain-life and cyclic stress-strain curves were calculated. Fracture surface analysis of both materials was done. The results showed that plasticity under dynamic load conditions is satisfactory for both materials which give them good resistance to crack initiation and propagation.",
publisher = "Pergamon-Elsevier Science Ltd, Oxford",
journal = "Engineering Failure Analysis",
title = "Effect of LCF on behavior and microstructure of microalloyed HSLA steel and its simulated CGHAZ",
pages = "1106-1094",
volume = "104",
doi = "10.1016/j.engfailanal.2019.06.017"
}

Aleksić, V., Milović, L., Blačić, I., Vuherer, T.,& Bulatović, S.. (2019). Effect of LCF on behavior and microstructure of microalloyed HSLA steel and its simulated CGHAZ. in Engineering Failure Analysis
Pergamon-Elsevier Science Ltd, Oxford., 104, 1094-1106.
https://doi.org/10.1016/j.engfailanal.2019.06.017

Aleksić V, Milović L, Blačić I, Vuherer T, Bulatović S. Effect of LCF on behavior and microstructure of microalloyed HSLA steel and its simulated CGHAZ. in Engineering Failure Analysis. 2019;104:1094-1106.
doi:10.1016/j.engfailanal.2019.06.017 .

Aleksić, Vujadin, Milović, Ljubica, Blačić, Ivo, Vuherer, Tomaz, Bulatović, Srđan, "Effect of LCF on behavior and microstructure of microalloyed HSLA steel and its simulated CGHAZ" in Engineering Failure Analysis, 104 (2019):1094-1106,
https://doi.org/10.1016/j.engfailanal.2019.06.017 . .

TY  - JOUR
AU  - Milović, Ljubica
AU  - Petrovski, Blagoj
AU  - Vuherer, Tomaz
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4142
AB  - This paper presents a method for estimating the residual-strength of welded pressure vessel made of HSLA steel which contains a surface axial crack. In order to analyze the behavior of the structure, a set of specimens were extracted from the welded plates using the same welding procedure as used for welding of the vessel. Before the fatigue precracking, the notches were positioned in parent material, heat-affected zone and weld metal of standard bend specimens. The J-integral resistance curve method for residual strength prediction comprises the following steps: 1. Obtaining of root J(R) resistance curves for the pressure vessel material using convenient specimens; 2. Obtaining root J crack driving force curves for the investigated structure for different crack sizes and different levels of applied stresses by applying the appropriate model of plasticity (Dugdale model); 3. Determination of the instability point as the tangency point between the crack driving force curve and the resistance curve. J-resistance curve of welded joint constituents were determined at -40 degrees C using a single specimen compliance procedure.
PB  - Pergamon-Elsevier Science Ltd, Oxford
T2  - Engineering Failure Analysis
T1  - Estimation of residual strength of a crack-containing welded pressure vessel exposed to a subzero operating temperature
VL  - 106
DO  - 10.1016/j.engfailanal.2019.104167
ER  - 

@article{
author = "Milović, Ljubica and Petrovski, Blagoj and Vuherer, Tomaz",
year = "2019",
abstract = "This paper presents a method for estimating the residual-strength of welded pressure vessel made of HSLA steel which contains a surface axial crack. In order to analyze the behavior of the structure, a set of specimens were extracted from the welded plates using the same welding procedure as used for welding of the vessel. Before the fatigue precracking, the notches were positioned in parent material, heat-affected zone and weld metal of standard bend specimens. The J-integral resistance curve method for residual strength prediction comprises the following steps: 1. Obtaining of root J(R) resistance curves for the pressure vessel material using convenient specimens; 2. Obtaining root J crack driving force curves for the investigated structure for different crack sizes and different levels of applied stresses by applying the appropriate model of plasticity (Dugdale model); 3. Determination of the instability point as the tangency point between the crack driving force curve and the resistance curve. J-resistance curve of welded joint constituents were determined at -40 degrees C using a single specimen compliance procedure.",
publisher = "Pergamon-Elsevier Science Ltd, Oxford",
journal = "Engineering Failure Analysis",
title = "Estimation of residual strength of a crack-containing welded pressure vessel exposed to a subzero operating temperature",
volume = "106",
doi = "10.1016/j.engfailanal.2019.104167"
}

Milović, L., Petrovski, B.,& Vuherer, T.. (2019). Estimation of residual strength of a crack-containing welded pressure vessel exposed to a subzero operating temperature. in Engineering Failure Analysis
Pergamon-Elsevier Science Ltd, Oxford., 106.
https://doi.org/10.1016/j.engfailanal.2019.104167

Milović L, Petrovski B, Vuherer T. Estimation of residual strength of a crack-containing welded pressure vessel exposed to a subzero operating temperature. in Engineering Failure Analysis. 2019;106.
doi:10.1016/j.engfailanal.2019.104167 .

Milović, Ljubica, Petrovski, Blagoj, Vuherer, Tomaz, "Estimation of residual strength of a crack-containing welded pressure vessel exposed to a subzero operating temperature" in Engineering Failure Analysis, 106 (2019),
https://doi.org/10.1016/j.engfailanal.2019.104167 . .

TY  - JOUR
AU  - Durdević, Đorđe
AU  - Andelić, Nina
AU  - Milosević-Mitić, Vesna
AU  - Maneski, Taško
AU  - Rakin, Marko
AU  - Đurđević, Andrijana
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4196
AB  - The purpose of this work is to present analytical and numerical determination of equivalent stress and deformation of open section thin-walled U and Z cantilever beams loaded with torsion. This work can be divided into two parts. In the first part of this paper, equivalent stress and deformation are obtained by analytical calculation for encastered model over the whole cross section. In the second part, the finite element method is applied for four different encastered models and the obtained results are compared with the analytical calculation.
PB  - Society for Structural Integrity and Life, Institute for Material Testing
T2  - Structural Integrity and Life
T1  - Influence of encastering on thin-walled cantilever beams with u and z profiles on the magnitude of equivalent stress and deformation
EP  - 254
IS  - 3
SP  - 251
VL  - 19
UR  - https://hdl.handle.net/21.15107/rcub_technorep_4196
ER  - 

@article{
author = "Durdević, Đorđe and Andelić, Nina and Milosević-Mitić, Vesna and Maneski, Taško and Rakin, Marko and Đurđević, Andrijana",
year = "2019",
abstract = "The purpose of this work is to present analytical and numerical determination of equivalent stress and deformation of open section thin-walled U and Z cantilever beams loaded with torsion. This work can be divided into two parts. In the first part of this paper, equivalent stress and deformation are obtained by analytical calculation for encastered model over the whole cross section. In the second part, the finite element method is applied for four different encastered models and the obtained results are compared with the analytical calculation.",
publisher = "Society for Structural Integrity and Life, Institute for Material Testing",
journal = "Structural Integrity and Life",
title = "Influence of encastering on thin-walled cantilever beams with u and z profiles on the magnitude of equivalent stress and deformation",
pages = "254-251",
number = "3",
volume = "19",
url = "https://hdl.handle.net/21.15107/rcub_technorep_4196"
}

Durdević, Đ., Andelić, N., Milosević-Mitić, V., Maneski, T., Rakin, M.,& Đurđević, A.. (2019). Influence of encastering on thin-walled cantilever beams with u and z profiles on the magnitude of equivalent stress and deformation. in Structural Integrity and Life
Society for Structural Integrity and Life, Institute for Material Testing., 19(3), 251-254.
https://hdl.handle.net/21.15107/rcub_technorep_4196

Durdević Đ, Andelić N, Milosević-Mitić V, Maneski T, Rakin M, Đurđević A. Influence of encastering on thin-walled cantilever beams with u and z profiles on the magnitude of equivalent stress and deformation. in Structural Integrity and Life. 2019;19(3):251-254.
https://hdl.handle.net/21.15107/rcub_technorep_4196 .

Durdević, Đorđe, Andelić, Nina, Milosević-Mitić, Vesna, Maneski, Taško, Rakin, Marko, Đurđević, Andrijana, "Influence of encastering on thin-walled cantilever beams with u and z profiles on the magnitude of equivalent stress and deformation" in Structural Integrity and Life, 19, no. 3 (2019):251-254,
https://hdl.handle.net/21.15107/rcub_technorep_4196 .

TY  - JOUR
AU  - Aleksić, Bojana
AU  - Milović, Ljubica
AU  - Grbović, Aleksandar
AU  - Hemer, Abubkr
AU  - Aleksić, Vujadin
AU  - Zrilić, Milorad
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3783
AB  - Steel grade 14MoV6-3 is a low-carbon microalloyed steel with addition of chromium and molybdenum. This grade is designed mainly for power industry applications, withstanding operating at elevated temperatures.In this paper, mechanical properties of steel grade 14MoV6-3 and methodology of calculation of critical values of the J-integral are presented. The level of damage is determined by analyzing the virgin material of the same grade. The focus of presented investigation is on the experimental J integral determination, where critical values of the J-integral (J(IC)) are compared with the values obtained by using the finite element methods (FEM). FEM model was defined on the basis of experimental conditions and obtained numerical values should confirm our experimental results.
PB  - Elsevier Science Bv, Amsterdam
T2  - ECF22 - Loading and Environmental Effects on Structural Integrity
T1  - Experimental and numerical investigations of the critical values of J-integral for the steel of steam pipelines
EP  - 1594
SP  - 1589
VL  - 13
DO  - 10.1016/j.prostr.2018.12.335
ER  - 

@article{
author = "Aleksić, Bojana and Milović, Ljubica and Grbović, Aleksandar and Hemer, Abubkr and Aleksić, Vujadin and Zrilić, Milorad",
year = "2018",
abstract = "Steel grade 14MoV6-3 is a low-carbon microalloyed steel with addition of chromium and molybdenum. This grade is designed mainly for power industry applications, withstanding operating at elevated temperatures.In this paper, mechanical properties of steel grade 14MoV6-3 and methodology of calculation of critical values of the J-integral are presented. The level of damage is determined by analyzing the virgin material of the same grade. The focus of presented investigation is on the experimental J integral determination, where critical values of the J-integral (J(IC)) are compared with the values obtained by using the finite element methods (FEM). FEM model was defined on the basis of experimental conditions and obtained numerical values should confirm our experimental results.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "ECF22 - Loading and Environmental Effects on Structural Integrity",
title = "Experimental and numerical investigations of the critical values of J-integral for the steel of steam pipelines",
pages = "1594-1589",
volume = "13",
doi = "10.1016/j.prostr.2018.12.335"
}

Aleksić, B., Milović, L., Grbović, A., Hemer, A., Aleksić, V.,& Zrilić, M.. (2018). Experimental and numerical investigations of the critical values of J-integral for the steel of steam pipelines. in ECF22 - Loading and Environmental Effects on Structural Integrity
Elsevier Science Bv, Amsterdam., 13, 1589-1594.
https://doi.org/10.1016/j.prostr.2018.12.335

Aleksić B, Milović L, Grbović A, Hemer A, Aleksić V, Zrilić M. Experimental and numerical investigations of the critical values of J-integral for the steel of steam pipelines. in ECF22 - Loading and Environmental Effects on Structural Integrity. 2018;13:1589-1594.
doi:10.1016/j.prostr.2018.12.335 .

Aleksić, Bojana, Milović, Ljubica, Grbović, Aleksandar, Hemer, Abubkr, Aleksić, Vujadin, Zrilić, Milorad, "Experimental and numerical investigations of the critical values of J-integral for the steel of steam pipelines" in ECF22 - Loading and Environmental Effects on Structural Integrity, 13 (2018):1589-1594,
https://doi.org/10.1016/j.prostr.2018.12.335 . .

TY  - JOUR
AU  - Jeremić, Lazar
AU  - Đorđević, Branislav
AU  - Sedmak, Simon
AU  - Sedmak, Aleksandar
AU  - Rakin, Marko
AU  - Arandelović, Mihajlo
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3777
AB  - Presented is the effect of plasma hardfacing (or just hardfacing) and carbides presence on the occurrence of cracks and microcracks in the welded layer. The reasons behind this phenomenon are analysed and explained. In addition, the plasma welding technology with all the necessary data such as welding parameters is shown for the case of undamaged tooth of a machine used for the milling of marble. The welded layer with a significant amount of tungsten-carbide is applied onto new, undamaged tooth in order to improve the characteristics of the surface layer of the base material by increasing its hardness which leads to increasing of wear resistance and impact toughness. After welding, the tooth is cut using electrical discharge machining (EDM) for examining the applied surface layer in different locations throughout the welded joint. Macro and microstructural analysis aided in determining the characteristics of the surface layer. The nature and causes of cracks and microcracks are analysed in order to provide a better solution to avoid crack occurrence, as well as in determining their potential effect on the integrity of the tooth as a whole.
PB  - Society for Structural Integrity and Life, Institute for Material Testing
T2  - Structural Integrity and Life
T1  - Effect of plasma hardfacing and carbides presence on the occurrence of cracks and microcracks
EP  - 103
IS  - 2
SP  - 99
VL  - 18
UR  - https://hdl.handle.net/21.15107/rcub_technorep_3777
ER  - 

@article{
author = "Jeremić, Lazar and Đorđević, Branislav and Sedmak, Simon and Sedmak, Aleksandar and Rakin, Marko and Arandelović, Mihajlo",
year = "2018",
abstract = "Presented is the effect of plasma hardfacing (or just hardfacing) and carbides presence on the occurrence of cracks and microcracks in the welded layer. The reasons behind this phenomenon are analysed and explained. In addition, the plasma welding technology with all the necessary data such as welding parameters is shown for the case of undamaged tooth of a machine used for the milling of marble. The welded layer with a significant amount of tungsten-carbide is applied onto new, undamaged tooth in order to improve the characteristics of the surface layer of the base material by increasing its hardness which leads to increasing of wear resistance and impact toughness. After welding, the tooth is cut using electrical discharge machining (EDM) for examining the applied surface layer in different locations throughout the welded joint. Macro and microstructural analysis aided in determining the characteristics of the surface layer. The nature and causes of cracks and microcracks are analysed in order to provide a better solution to avoid crack occurrence, as well as in determining their potential effect on the integrity of the tooth as a whole.",
publisher = "Society for Structural Integrity and Life, Institute for Material Testing",
journal = "Structural Integrity and Life",
title = "Effect of plasma hardfacing and carbides presence on the occurrence of cracks and microcracks",
pages = "103-99",
number = "2",
volume = "18",
url = "https://hdl.handle.net/21.15107/rcub_technorep_3777"
}

Jeremić, L., Đorđević, B., Sedmak, S., Sedmak, A., Rakin, M.,& Arandelović, M.. (2018). Effect of plasma hardfacing and carbides presence on the occurrence of cracks and microcracks. in Structural Integrity and Life
Society for Structural Integrity and Life, Institute for Material Testing., 18(2), 99-103.
https://hdl.handle.net/21.15107/rcub_technorep_3777

Jeremić L, Đorđević B, Sedmak S, Sedmak A, Rakin M, Arandelović M. Effect of plasma hardfacing and carbides presence on the occurrence of cracks and microcracks. in Structural Integrity and Life. 2018;18(2):99-103.
https://hdl.handle.net/21.15107/rcub_technorep_3777 .

Jeremić, Lazar, Đorđević, Branislav, Sedmak, Simon, Sedmak, Aleksandar, Rakin, Marko, Arandelović, Mihajlo, "Effect of plasma hardfacing and carbides presence on the occurrence of cracks and microcracks" in Structural Integrity and Life, 18, no. 2 (2018):99-103,
https://hdl.handle.net/21.15107/rcub_technorep_3777 .

TY  - JOUR
AU  - Aleksić, Vujadin
AU  - Milović, Ljubica
AU  - Aleksić, Bojana
AU  - Bulatović, Srđan
AU  - Burzić, Zijah
AU  - Hemer, Abubkr
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3495
AB  - Experimental research on the behaviour of high-strength low-alloy steel ( HSLA)exposed to low-cycle fatigue (LCF) with controlled and fully reversible strain (Delta epsilon/2 = const, R epsilon =epsilon(min)/epsilon(max) = -1) has been analysed. LCF tests are performed on a series of smooth bar shaped specimens, 11 x 11 x 95 mm, parent metal (PM), welded joint (WJ) and simulated heat affected zone (SHAZ) of steel Nionikral 70 (NN-70) with semi-amplitude of controlled strain, Delta epsilon/2 = 0.40- 0.80. The results of the experimental investigation have given us important information on the understanding of fatigue behaviour of steel NN-70 and its welded joints. In this work the results of static and dynamic-, that is monotonous and fatigue behaviour of the material, are compared, which is a practical contribution to the assessment of the behaviour of PM and WJ of steel NN-70 exposed to effects of low cycle fatigue, i.e. monotonous and fatigue behaviour of the material.
PB  - Society for Structural Integrity and Life, Institute for Material Testing
T2  - Structural Integrity and Life
T1  - Behaviour of nionikral-70 in low-cycle fatigue
EP  - 73
IS  - 1
SP  - 61
VL  - 17
UR  - https://hdl.handle.net/21.15107/rcub_technorep_3495
ER  - 

@article{
author = "Aleksić, Vujadin and Milović, Ljubica and Aleksić, Bojana and Bulatović, Srđan and Burzić, Zijah and Hemer, Abubkr",
year = "2017",
abstract = "Experimental research on the behaviour of high-strength low-alloy steel ( HSLA)exposed to low-cycle fatigue (LCF) with controlled and fully reversible strain (Delta epsilon/2 = const, R epsilon =epsilon(min)/epsilon(max) = -1) has been analysed. LCF tests are performed on a series of smooth bar shaped specimens, 11 x 11 x 95 mm, parent metal (PM), welded joint (WJ) and simulated heat affected zone (SHAZ) of steel Nionikral 70 (NN-70) with semi-amplitude of controlled strain, Delta epsilon/2 = 0.40- 0.80. The results of the experimental investigation have given us important information on the understanding of fatigue behaviour of steel NN-70 and its welded joints. In this work the results of static and dynamic-, that is monotonous and fatigue behaviour of the material, are compared, which is a practical contribution to the assessment of the behaviour of PM and WJ of steel NN-70 exposed to effects of low cycle fatigue, i.e. monotonous and fatigue behaviour of the material.",
publisher = "Society for Structural Integrity and Life, Institute for Material Testing",
journal = "Structural Integrity and Life",
title = "Behaviour of nionikral-70 in low-cycle fatigue",
pages = "73-61",
number = "1",
volume = "17",
url = "https://hdl.handle.net/21.15107/rcub_technorep_3495"
}

Aleksić, V., Milović, L., Aleksić, B., Bulatović, S., Burzić, Z.,& Hemer, A.. (2017). Behaviour of nionikral-70 in low-cycle fatigue. in Structural Integrity and Life
Society for Structural Integrity and Life, Institute for Material Testing., 17(1), 61-73.
https://hdl.handle.net/21.15107/rcub_technorep_3495

Aleksić V, Milović L, Aleksić B, Bulatović S, Burzić Z, Hemer A. Behaviour of nionikral-70 in low-cycle fatigue. in Structural Integrity and Life. 2017;17(1):61-73.
https://hdl.handle.net/21.15107/rcub_technorep_3495 .

Aleksić, Vujadin, Milović, Ljubica, Aleksić, Bojana, Bulatović, Srđan, Burzić, Zijah, Hemer, Abubkr, "Behaviour of nionikral-70 in low-cycle fatigue" in Structural Integrity and Life, 17, no. 1 (2017):61-73,
https://hdl.handle.net/21.15107/rcub_technorep_3495 .

TY  - JOUR
AU  - Aleksić, Bojana
AU  - Aleksić, Vujadin
AU  - Milović, Ljubica
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3524
AB  - In the present paper, after calculation using the Finite Element Method (FEM), stress distribution on the model of a part of the pressure-tank mantle without welded joints (WJ), with transversal WJ, longitudinal WJ and cross point location of WJ is analyzed. Also, FEM calculation and comparative analysis of the effects of WJ on the stress distribution have been conducted using the tank for liquid carbon dioxide as an example, on which, in addition to the mantle sheet-metal and bottom with necessary openings and elements such as saddles with supports and hangers, transversal and longitudinal butt WJ, have been modelled.
AB  - U radu je posle proračuna metodom konačnih elemenata (MKE) analizirana raspodela napona na modelu dela oplate rezervoara pod pritiskom bez zavarenih spojeva (ZS), sa obimnim ZS, podužnim ZS i ukrsnim mestom ZS. Takođe, u radu je na primeru rezervoara za tečni ugljendioksid, na kome su pored limova oplate i danaca sa potrebnim otvorima i elementima kao što su sedla sa osloncima i uške modelirani obimni i podužni sučeoni ZS, urađen proračun MKE i uporedna analiza uticaja ZS na raspodelu napona.
PB  - Engineering Society for Corrosion, Belgrade, Serbia
T2  - Zaštita materijala
T1  - Analysis of the effects of butt welded joints on a carrying capacity of a structure tank
T1  - Analiza uticaja sučeono zavarenih spojeva na nosivost konstrukcije rezervoara
EP  - 468
IS  - 4
SP  - 462
VL  - 58
DO  - 10.5937/ZasMat1704462A
ER  - 

@article{
author = "Aleksić, Bojana and Aleksić, Vujadin and Milović, Ljubica",
year = "2017",
abstract = "In the present paper, after calculation using the Finite Element Method (FEM), stress distribution on the model of a part of the pressure-tank mantle without welded joints (WJ), with transversal WJ, longitudinal WJ and cross point location of WJ is analyzed. Also, FEM calculation and comparative analysis of the effects of WJ on the stress distribution have been conducted using the tank for liquid carbon dioxide as an example, on which, in addition to the mantle sheet-metal and bottom with necessary openings and elements such as saddles with supports and hangers, transversal and longitudinal butt WJ, have been modelled., U radu je posle proračuna metodom konačnih elemenata (MKE) analizirana raspodela napona na modelu dela oplate rezervoara pod pritiskom bez zavarenih spojeva (ZS), sa obimnim ZS, podužnim ZS i ukrsnim mestom ZS. Takođe, u radu je na primeru rezervoara za tečni ugljendioksid, na kome su pored limova oplate i danaca sa potrebnim otvorima i elementima kao što su sedla sa osloncima i uške modelirani obimni i podužni sučeoni ZS, urađen proračun MKE i uporedna analiza uticaja ZS na raspodelu napona.",
publisher = "Engineering Society for Corrosion, Belgrade, Serbia",
journal = "Zaštita materijala",
title = "Analysis of the effects of butt welded joints on a carrying capacity of a structure tank, Analiza uticaja sučeono zavarenih spojeva na nosivost konstrukcije rezervoara",
pages = "468-462",
number = "4",
volume = "58",
doi = "10.5937/ZasMat1704462A"
}

Aleksić, B., Aleksić, V.,& Milović, L.. (2017). Analysis of the effects of butt welded joints on a carrying capacity of a structure tank. in Zaštita materijala
Engineering Society for Corrosion, Belgrade, Serbia., 58(4), 462-468.
https://doi.org/10.5937/ZasMat1704462A

Aleksić B, Aleksić V, Milović L. Analysis of the effects of butt welded joints on a carrying capacity of a structure tank. in Zaštita materijala. 2017;58(4):462-468.
doi:10.5937/ZasMat1704462A .

Aleksić, Bojana, Aleksić, Vujadin, Milović, Ljubica, "Analysis of the effects of butt welded joints on a carrying capacity of a structure tank" in Zaštita materijala, 58, no. 4 (2017):462-468,
https://doi.org/10.5937/ZasMat1704462A . .

TY  - JOUR
AU  - Milović, Ljubica
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3677
AB  - While refurbishing fossil fuel power plants, it is of great importance for safety precaution to replace the aged components which exceeded their designed service life with new ones. The most important parameter for thick-walled components is thickness value and the most important procedure is its reduction. Reduction of wall-thickness is achieved by changing the material of thick-walled components. In present paper some examples of wall-thickness reduction are shown in case of substituting a ferritic/martensitic micro-alloyed steel P91 for P22.
PB  - Springer-Verlag Berlin, Berlin
T2  - Fracture At All Scales
T1  - Is Substituting P91 for P22 Justified?
EP  - 103
SP  - 89
DO  - 10.1007/978-3-319-32634-4_5
ER  - 

@article{
author = "Milović, Ljubica",
year = "2017",
abstract = "While refurbishing fossil fuel power plants, it is of great importance for safety precaution to replace the aged components which exceeded their designed service life with new ones. The most important parameter for thick-walled components is thickness value and the most important procedure is its reduction. Reduction of wall-thickness is achieved by changing the material of thick-walled components. In present paper some examples of wall-thickness reduction are shown in case of substituting a ferritic/martensitic micro-alloyed steel P91 for P22.",
publisher = "Springer-Verlag Berlin, Berlin",
journal = "Fracture At All Scales",
title = "Is Substituting P91 for P22 Justified?",
pages = "103-89",
doi = "10.1007/978-3-319-32634-4_5"
}

Milović, L.. (2017). Is Substituting P91 for P22 Justified?. in Fracture At All Scales
Springer-Verlag Berlin, Berlin., 89-103.
https://doi.org/10.1007/978-3-319-32634-4_5

Milović L. Is Substituting P91 for P22 Justified?. in Fracture At All Scales. 2017;:89-103.
doi:10.1007/978-3-319-32634-4_5 .

Milović, Ljubica, "Is Substituting P91 for P22 Justified?" in Fracture At All Scales (2017):89-103,
https://doi.org/10.1007/978-3-319-32634-4_5 . .

TY  - JOUR
AU  - Aleksić, Vujadin
AU  - Dojčinović, Marina
AU  - Milović, Ljubica
AU  - Samardžić, Ivan
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3475
AB  - This paper presents the research into behaviour of HSLA steel affected by cavitation. The parent material (PM) and simulated heat-affected zone (SHAZ) were studied. Ultrasonic vibratory cavitation test was performed in laboratory conditions (by stationary specimen method). Scanning electron microscopy (SEM) was used to observe the variations in the surface morphology that occurred within different time intervals.
PB  - Croatian Metallurgical Soc, Zagreb
T2  - Metalurgija
T1  - Cavitation damages morphology of high-strength low-alloy steel
EP  - 425
IS  - 3
SP  - 423
VL  - 55
UR  - https://hdl.handle.net/21.15107/rcub_technorep_3475
ER  - 

@article{
author = "Aleksić, Vujadin and Dojčinović, Marina and Milović, Ljubica and Samardžić, Ivan",
year = "2016",
abstract = "This paper presents the research into behaviour of HSLA steel affected by cavitation. The parent material (PM) and simulated heat-affected zone (SHAZ) were studied. Ultrasonic vibratory cavitation test was performed in laboratory conditions (by stationary specimen method). Scanning electron microscopy (SEM) was used to observe the variations in the surface morphology that occurred within different time intervals.",
publisher = "Croatian Metallurgical Soc, Zagreb",
journal = "Metalurgija",
title = "Cavitation damages morphology of high-strength low-alloy steel",
pages = "425-423",
number = "3",
volume = "55",
url = "https://hdl.handle.net/21.15107/rcub_technorep_3475"
}

Aleksić, V., Dojčinović, M., Milović, L.,& Samardžić, I.. (2016). Cavitation damages morphology of high-strength low-alloy steel. in Metalurgija
Croatian Metallurgical Soc, Zagreb., 55(3), 423-425.
https://hdl.handle.net/21.15107/rcub_technorep_3475

Aleksić V, Dojčinović M, Milović L, Samardžić I. Cavitation damages morphology of high-strength low-alloy steel. in Metalurgija. 2016;55(3):423-425.
https://hdl.handle.net/21.15107/rcub_technorep_3475 .

Aleksić, Vujadin, Dojčinović, Marina, Milović, Ljubica, Samardžić, Ivan, "Cavitation damages morphology of high-strength low-alloy steel" in Metalurgija, 55, no. 3 (2016):423-425,
https://hdl.handle.net/21.15107/rcub_technorep_3475 .

TY  - JOUR
AU  - Aleksić, Vujadin
AU  - Milović, Ljubica
AU  - Aleksić, Bojana
AU  - Hemer, Abubkr
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3294
AB  - In present paper, the experimental research of the behaviour of high-strength low-alloy steel (HSLA) exposed to low-cycle fatigue (LCF) with controlled and fully reversible strain (Delta epsilon/2 = const, R epsilon = epsilon(min)/epsilon(max) = -1) has been analysed. Low-cycle fatigue tests were performed on a series of smooth specimens made of steel Nionikral 70 (NN-70), with semi-amplitude of controlled strain, Delta epsilon/2=0.35, 0.45, 0.50, 0.60, 0.70 and 0.80. Characterization and description of the low-cycle elastoplastic behaviour of the material by construction of characteristic curves of low-cycle fatigue are made using the characteristic hysteresis, load-strain force for each level of controlled strain, selected from the areas of stabilization. For the selection of stabilized hysteresis and processing of the results of low-cycle fatigue tests the recommendations of the ISO 12106:2003 (E) and ASTM E 606-04 standards were used, which in this work means to compare the two results. For each strain level characteristic stabilized hysteresis were selected, determined in accordance with recommendations of the ISO 12106:2003 (E) and ASTM E 606-04 standards, from which the data necessary for further processing of the results and finally for the construction of characteristic curves of low cycle fatigue were read. Constructed curves are compared, and the effect of selection of the recommendations from the standards on characterization of the behaviour of steel NN-70 estimated. The results of experimental investigation have given us important information on the understanding of fatigue behaviour of steel NN-70. In this work the results of static and dynamic, that is monotonous and fatigue behaviour of the material, were compared, which is a practical contribution to the assessment of the behaviour of steel NN-70 exposed to the effects of low-cycle fatigue, i.e. monotonous and fatigue behaviour of the material.
PB  - Elsevier Science Bv, Amsterdam
T2  - 21st European Conference on Fracture, (ECF21)
T1  - Indicators of HSLA steel behavior under low cycle fatigue loading
EP  - 3321
SP  - 3313
VL  - 2
DO  - 10.1016/j.prostr.2016.06.413
ER  - 

@article{
author = "Aleksić, Vujadin and Milović, Ljubica and Aleksić, Bojana and Hemer, Abubkr",
year = "2016",
abstract = "In present paper, the experimental research of the behaviour of high-strength low-alloy steel (HSLA) exposed to low-cycle fatigue (LCF) with controlled and fully reversible strain (Delta epsilon/2 = const, R epsilon = epsilon(min)/epsilon(max) = -1) has been analysed. Low-cycle fatigue tests were performed on a series of smooth specimens made of steel Nionikral 70 (NN-70), with semi-amplitude of controlled strain, Delta epsilon/2=0.35, 0.45, 0.50, 0.60, 0.70 and 0.80. Characterization and description of the low-cycle elastoplastic behaviour of the material by construction of characteristic curves of low-cycle fatigue are made using the characteristic hysteresis, load-strain force for each level of controlled strain, selected from the areas of stabilization. For the selection of stabilized hysteresis and processing of the results of low-cycle fatigue tests the recommendations of the ISO 12106:2003 (E) and ASTM E 606-04 standards were used, which in this work means to compare the two results. For each strain level characteristic stabilized hysteresis were selected, determined in accordance with recommendations of the ISO 12106:2003 (E) and ASTM E 606-04 standards, from which the data necessary for further processing of the results and finally for the construction of characteristic curves of low cycle fatigue were read. Constructed curves are compared, and the effect of selection of the recommendations from the standards on characterization of the behaviour of steel NN-70 estimated. The results of experimental investigation have given us important information on the understanding of fatigue behaviour of steel NN-70. In this work the results of static and dynamic, that is monotonous and fatigue behaviour of the material, were compared, which is a practical contribution to the assessment of the behaviour of steel NN-70 exposed to the effects of low-cycle fatigue, i.e. monotonous and fatigue behaviour of the material.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "21st European Conference on Fracture, (ECF21)",
title = "Indicators of HSLA steel behavior under low cycle fatigue loading",
pages = "3321-3313",
volume = "2",
doi = "10.1016/j.prostr.2016.06.413"
}

Aleksić, V., Milović, L., Aleksić, B.,& Hemer, A.. (2016). Indicators of HSLA steel behavior under low cycle fatigue loading. in 21st European Conference on Fracture, (ECF21)
Elsevier Science Bv, Amsterdam., 2, 3313-3321.
https://doi.org/10.1016/j.prostr.2016.06.413

Aleksić V, Milović L, Aleksić B, Hemer A. Indicators of HSLA steel behavior under low cycle fatigue loading. in 21st European Conference on Fracture, (ECF21). 2016;2:3313-3321.
doi:10.1016/j.prostr.2016.06.413 .

Aleksić, Vujadin, Milović, Ljubica, Aleksić, Bojana, Hemer, Abubkr, "Indicators of HSLA steel behavior under low cycle fatigue loading" in 21st European Conference on Fracture, (ECF21), 2 (2016):3313-3321,
https://doi.org/10.1016/j.prostr.2016.06.413 . .

TY  - JOUR
AU  - Milović, Ljubica
AU  - Bulatović, Srđan
AU  - Aleksić, Vujadin
AU  - Burzić, Zijah
PY  - 2014
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2709
AB  - A quenched and tempered high strength low alloy steel NIONIKRAL 70 for producing welded pressure vessels, where high resistance to fatigue crack propagation and high tolerance of damage are of high importance, has been investigated. Low cycle fatigue tests were conducting on several series of uniaxial cylindrical smooth specimens under strain control. The cycle behavior of the material is characterized using Coffin-Manson relation.
PB  - Elsevier Science Bv, Amsterdam
T2  - 20th European Conference on Fracture
T1  - Low cycle fatigue of weldments produced of a high strength low alloyed steel
EP  - 1434
SP  - 1429
VL  - 3
DO  - 10.1016/j.mspro.2014.06.231
ER  - 

@article{
author = "Milović, Ljubica and Bulatović, Srđan and Aleksić, Vujadin and Burzić, Zijah",
year = "2014",
abstract = "A quenched and tempered high strength low alloy steel NIONIKRAL 70 for producing welded pressure vessels, where high resistance to fatigue crack propagation and high tolerance of damage are of high importance, has been investigated. Low cycle fatigue tests were conducting on several series of uniaxial cylindrical smooth specimens under strain control. The cycle behavior of the material is characterized using Coffin-Manson relation.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "20th European Conference on Fracture",
title = "Low cycle fatigue of weldments produced of a high strength low alloyed steel",
pages = "1434-1429",
volume = "3",
doi = "10.1016/j.mspro.2014.06.231"
}

Milović, L., Bulatović, S., Aleksić, V.,& Burzić, Z.. (2014). Low cycle fatigue of weldments produced of a high strength low alloyed steel. in 20th European Conference on Fracture
Elsevier Science Bv, Amsterdam., 3, 1429-1434.
https://doi.org/10.1016/j.mspro.2014.06.231

Milović L, Bulatović S, Aleksić V, Burzić Z. Low cycle fatigue of weldments produced of a high strength low alloyed steel. in 20th European Conference on Fracture. 2014;3:1429-1434.
doi:10.1016/j.mspro.2014.06.231 .

Milović, Ljubica, Bulatović, Srđan, Aleksić, Vujadin, Burzić, Zijah, "Low cycle fatigue of weldments produced of a high strength low alloyed steel" in 20th European Conference on Fracture, 3 (2014):1429-1434,
https://doi.org/10.1016/j.mspro.2014.06.231 . .

TY  - JOUR
AU  - Milošević-Mitić, Vesna
AU  - Maneski, Taško
AU  - Andjelić, Nina M.
AU  - Milović, Ljubica
AU  - Petrović, Ana S.
AU  - Gacesa, Branka M.
PY  - 2014
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2683
AB  - The subject of the paper is the temperature distribution in the thin metallic ferromagnetic plate influenced by moving linear high frequency induction heater. As a result of high frequency electromagnetic field, conducting currents appear in the part of the plate. Distribution of the eddy-current power across the plate thickness is obtained by use of complex analysis. The influences of the heater frequency, magnetic field intensity and plate thickness on the heat power density were discussed. By treating this power as a moving heat source, differential equations governing distribution of the temperature field are formulated. Temperature across the plate thickness is assumed to be in linear form. Differential equations are analytically solved by using integral-transform technique, Fourier finite-sine and finite-cosine transform and Laplace transform. The influence of the heater velocity to the plate temperature is presented on numerical examples based on theoretically obtained results.
PB  - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
T2  - Thermal Science
T1  - Dynamic temperature field in the ferromagnetic plate induced by moving high frequency inductor
EP  - S58
SP  - S49
VL  - 18
DO  - 10.2298/TSCI130216173M
ER  - 

@article{
author = "Milošević-Mitić, Vesna and Maneski, Taško and Andjelić, Nina M. and Milović, Ljubica and Petrović, Ana S. and Gacesa, Branka M.",
year = "2014",
abstract = "The subject of the paper is the temperature distribution in the thin metallic ferromagnetic plate influenced by moving linear high frequency induction heater. As a result of high frequency electromagnetic field, conducting currents appear in the part of the plate. Distribution of the eddy-current power across the plate thickness is obtained by use of complex analysis. The influences of the heater frequency, magnetic field intensity and plate thickness on the heat power density were discussed. By treating this power as a moving heat source, differential equations governing distribution of the temperature field are formulated. Temperature across the plate thickness is assumed to be in linear form. Differential equations are analytically solved by using integral-transform technique, Fourier finite-sine and finite-cosine transform and Laplace transform. The influence of the heater velocity to the plate temperature is presented on numerical examples based on theoretically obtained results.",
publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd",
journal = "Thermal Science",
title = "Dynamic temperature field in the ferromagnetic plate induced by moving high frequency inductor",
pages = "S58-S49",
volume = "18",
doi = "10.2298/TSCI130216173M"
}

Milošević-Mitić, V., Maneski, T., Andjelić, N. M., Milović, L., Petrović, A. S.,& Gacesa, B. M.. (2014). Dynamic temperature field in the ferromagnetic plate induced by moving high frequency inductor. in Thermal Science
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 18, S49-S58.
https://doi.org/10.2298/TSCI130216173M

Milošević-Mitić V, Maneski T, Andjelić NM, Milović L, Petrović AS, Gacesa BM. Dynamic temperature field in the ferromagnetic plate induced by moving high frequency inductor. in Thermal Science. 2014;18:S49-S58.
doi:10.2298/TSCI130216173M .

Milošević-Mitić, Vesna, Maneski, Taško, Andjelić, Nina M., Milović, Ljubica, Petrović, Ana S., Gacesa, Branka M., "Dynamic temperature field in the ferromagnetic plate induced by moving high frequency inductor" in Thermal Science, 18 (2014):S49-S58,
https://doi.org/10.2298/TSCI130216173M . .

TY  - JOUR
AU  - Bulatović, Srđan
AU  - Burzić, Zijah
AU  - Aleksić, Vujadin
AU  - Sedmak, Aleksandar
AU  - Milović, Ljubica
PY  - 2014
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2811
AB  - High strength low-alloy steel under low cycle fatigue at a certain level of strain controlled achieve stabilized condition. During the fatigue loading stabilized hysteresis loop is determined, which typical cycle of stabilization is calculated as half number of cycles to failure. Stabilized hysteresis loop is a representative of all hysteresis and it's used to determine all of the parameters for the assessment of low cycle fatigue. This paper Shows comparison of complete strain-life curves of low cycle fatigue for two chosen stabilized hysteresis loop cycles of base metal HSLA steel marked as Nionikral 70.
PB  - Croatian Metallurgical Soc, Zagreb
T2  - Metalurgija
T1  - Impact of choice of stabilized hysteresis loop on the end result of investigation of high-strength low-alloy (hsla) steel on low cycle fatigue
EP  - 480
IS  - 4
SP  - 477
VL  - 53
UR  - https://hdl.handle.net/21.15107/rcub_technorep_2811
ER  - 

@article{
author = "Bulatović, Srđan and Burzić, Zijah and Aleksić, Vujadin and Sedmak, Aleksandar and Milović, Ljubica",
year = "2014",
abstract = "High strength low-alloy steel under low cycle fatigue at a certain level of strain controlled achieve stabilized condition. During the fatigue loading stabilized hysteresis loop is determined, which typical cycle of stabilization is calculated as half number of cycles to failure. Stabilized hysteresis loop is a representative of all hysteresis and it's used to determine all of the parameters for the assessment of low cycle fatigue. This paper Shows comparison of complete strain-life curves of low cycle fatigue for two chosen stabilized hysteresis loop cycles of base metal HSLA steel marked as Nionikral 70.",
publisher = "Croatian Metallurgical Soc, Zagreb",
journal = "Metalurgija",
title = "Impact of choice of stabilized hysteresis loop on the end result of investigation of high-strength low-alloy (hsla) steel on low cycle fatigue",
pages = "480-477",
number = "4",
volume = "53",
url = "https://hdl.handle.net/21.15107/rcub_technorep_2811"
}

Bulatović, S., Burzić, Z., Aleksić, V., Sedmak, A.,& Milović, L.. (2014). Impact of choice of stabilized hysteresis loop on the end result of investigation of high-strength low-alloy (hsla) steel on low cycle fatigue. in Metalurgija
Croatian Metallurgical Soc, Zagreb., 53(4), 477-480.
https://hdl.handle.net/21.15107/rcub_technorep_2811

Bulatović S, Burzić Z, Aleksić V, Sedmak A, Milović L. Impact of choice of stabilized hysteresis loop on the end result of investigation of high-strength low-alloy (hsla) steel on low cycle fatigue. in Metalurgija. 2014;53(4):477-480.
https://hdl.handle.net/21.15107/rcub_technorep_2811 .

Bulatović, Srđan, Burzić, Zijah, Aleksić, Vujadin, Sedmak, Aleksandar, Milović, Ljubica, "Impact of choice of stabilized hysteresis loop on the end result of investigation of high-strength low-alloy (hsla) steel on low cycle fatigue" in Metalurgija, 53, no. 4 (2014):477-480,
https://hdl.handle.net/21.15107/rcub_technorep_2811 .

TY  - JOUR
AU  - Bulatović, Srđan
AU  - Milović, Ljubica
AU  - Sedmak, Aleksandar
AU  - Samardžić, Ivan
PY  - 2014
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2848
AB  - Low cycle fatigue test was performed in ambient atmosphere at room temperature. cycle loading of material, in case of High strength low-alloy steel, entails modifications of its properties and in this paper is therefore shown behavior of fatigue life using low cycle fatigue parameters. Mere precisely, crack initiation life of tested specimens Was computed using theory of Coffin-Manson relation during the fatigue loading. The geometry Of the stabilized hysteresis loop of welded joint HSLA steel, marked as Nionikral 70, is also analyzed. This stabilized hysteresis loop is very important for determination of materials properties.
PB  - Croatian Metallurgical Soc, Zagreb
T2  - Metalurgija
T1  - Identification of low cycle fatigue parameters of high strength low-alloy (hsla) steel at room temperature
EP  - 468
IS  - 4
SP  - 466
VL  - 53
UR  - https://hdl.handle.net/21.15107/rcub_technorep_2848
ER  - 

@article{
author = "Bulatović, Srđan and Milović, Ljubica and Sedmak, Aleksandar and Samardžić, Ivan",
year = "2014",
abstract = "Low cycle fatigue test was performed in ambient atmosphere at room temperature. cycle loading of material, in case of High strength low-alloy steel, entails modifications of its properties and in this paper is therefore shown behavior of fatigue life using low cycle fatigue parameters. Mere precisely, crack initiation life of tested specimens Was computed using theory of Coffin-Manson relation during the fatigue loading. The geometry Of the stabilized hysteresis loop of welded joint HSLA steel, marked as Nionikral 70, is also analyzed. This stabilized hysteresis loop is very important for determination of materials properties.",
publisher = "Croatian Metallurgical Soc, Zagreb",
journal = "Metalurgija",
title = "Identification of low cycle fatigue parameters of high strength low-alloy (hsla) steel at room temperature",
pages = "468-466",
number = "4",
volume = "53",
url = "https://hdl.handle.net/21.15107/rcub_technorep_2848"
}

Bulatović, S., Milović, L., Sedmak, A.,& Samardžić, I.. (2014). Identification of low cycle fatigue parameters of high strength low-alloy (hsla) steel at room temperature. in Metalurgija
Croatian Metallurgical Soc, Zagreb., 53(4), 466-468.
https://hdl.handle.net/21.15107/rcub_technorep_2848

Bulatović S, Milović L, Sedmak A, Samardžić I. Identification of low cycle fatigue parameters of high strength low-alloy (hsla) steel at room temperature. in Metalurgija. 2014;53(4):466-468.
https://hdl.handle.net/21.15107/rcub_technorep_2848 .

Bulatović, Srđan, Milović, Ljubica, Sedmak, Aleksandar, Samardžić, Ivan, "Identification of low cycle fatigue parameters of high strength low-alloy (hsla) steel at room temperature" in Metalurgija, 53, no. 4 (2014):466-468,
https://hdl.handle.net/21.15107/rcub_technorep_2848 .

TY  - JOUR
AU  - Marković, Svetislav
AU  - Milović, Ljubica
AU  - Vrhovac, Miran
AU  - Lazović, Tatjana
AU  - Marinković, Aleksandar
AU  - Aleksić, Vujadin
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2272
AB  - This paper contains the results of experimental analysis of fatigue endurance of used steel teeth regenerated by hard facing. The cylindrical spur gears were tested and compared with the newly made ones, oiler being regenerated by hard facing with subsequent cementation and quenching. The fatigue testing wider variable amplitude loading was used to determine the duration of operational life through measurement of wear. The obtained results demonstrated the impact of hard facing methods on gear endurance in operation. In the test on regenerated gears it was discovered that initial pits appeared almost simultaneously for different facing materials and a bit earlier than in tests on newly made ones, despite their considerably higher pitting rate. Apart from that, the tested operational lives of regenerated and newly-made gears were approximately equal and much longer than predicted.
PB  - Editura Stiintifica Fmr, Bucharest
T2  - Metalurgia International
T1  - Life extension of gears flank surfaces regenerated by hard facing
EP  - 85
IS  - 2
SP  - 81
VL  - 18
UR  - https://hdl.handle.net/21.15107/rcub_technorep_2272
ER  - 

@article{
author = "Marković, Svetislav and Milović, Ljubica and Vrhovac, Miran and Lazović, Tatjana and Marinković, Aleksandar and Aleksić, Vujadin",
year = "2013",
abstract = "This paper contains the results of experimental analysis of fatigue endurance of used steel teeth regenerated by hard facing. The cylindrical spur gears were tested and compared with the newly made ones, oiler being regenerated by hard facing with subsequent cementation and quenching. The fatigue testing wider variable amplitude loading was used to determine the duration of operational life through measurement of wear. The obtained results demonstrated the impact of hard facing methods on gear endurance in operation. In the test on regenerated gears it was discovered that initial pits appeared almost simultaneously for different facing materials and a bit earlier than in tests on newly made ones, despite their considerably higher pitting rate. Apart from that, the tested operational lives of regenerated and newly-made gears were approximately equal and much longer than predicted.",
publisher = "Editura Stiintifica Fmr, Bucharest",
journal = "Metalurgia International",
title = "Life extension of gears flank surfaces regenerated by hard facing",
pages = "85-81",
number = "2",
volume = "18",
url = "https://hdl.handle.net/21.15107/rcub_technorep_2272"
}

Marković, S., Milović, L., Vrhovac, M., Lazović, T., Marinković, A.,& Aleksić, V.. (2013). Life extension of gears flank surfaces regenerated by hard facing. in Metalurgia International
Editura Stiintifica Fmr, Bucharest., 18(2), 81-85.
https://hdl.handle.net/21.15107/rcub_technorep_2272

Marković S, Milović L, Vrhovac M, Lazović T, Marinković A, Aleksić V. Life extension of gears flank surfaces regenerated by hard facing. in Metalurgia International. 2013;18(2):81-85.
https://hdl.handle.net/21.15107/rcub_technorep_2272 .

Marković, Svetislav, Milović, Ljubica, Vrhovac, Miran, Lazović, Tatjana, Marinković, Aleksandar, Aleksić, Vujadin, "Life extension of gears flank surfaces regenerated by hard facing" in Metalurgia International, 18, no. 2 (2013):81-85,
https://hdl.handle.net/21.15107/rcub_technorep_2272 .

TY  - JOUR
AU  - Milović, Ljubica
AU  - Vuherer, T.
AU  - Blačić, Ivo
AU  - Vrhovac, Miran
AU  - Stanković, M.
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2476
AB  - The subject of this paper is the microstructural and mechanical characterisation of regions of the heat-affected zone (HAZ) in steels containing 9-12% Cr that are used for operation at elevated temperatures. Tests were performed on regions in the HAZ, which was created by physical simulation using a thermal welding simulator. Half of the simulated samples (SSs) were tested at room temperature (RT) and at an operating temperature (OT) of 600 degrees C immediately after simulation/welding, while the rest of the simulated samples were tested at RT and at the OT after heat treatment following the welding, i.e., post-weld heat treatment (PWHT). In addition to the results from mechanical testing, the results from microstructural analysis using light microscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) are also presented. The manner in which PWHT contributes to the creep resistance of the HAZ in P91 steel is demonstrated.
PB  - Elsevier Sci Ltd, Oxford
T2  - Materials & Design
T1  - Microstructures and mechanical properties of creep resistant steel for application at elevated temperatures
EP  - 667
SP  - 660
VL  - 46
DO  - 10.1016/j.matdes.2012.10.057
ER  - 

@article{
author = "Milović, Ljubica and Vuherer, T. and Blačić, Ivo and Vrhovac, Miran and Stanković, M.",
year = "2013",
abstract = "The subject of this paper is the microstructural and mechanical characterisation of regions of the heat-affected zone (HAZ) in steels containing 9-12% Cr that are used for operation at elevated temperatures. Tests were performed on regions in the HAZ, which was created by physical simulation using a thermal welding simulator. Half of the simulated samples (SSs) were tested at room temperature (RT) and at an operating temperature (OT) of 600 degrees C immediately after simulation/welding, while the rest of the simulated samples were tested at RT and at the OT after heat treatment following the welding, i.e., post-weld heat treatment (PWHT). In addition to the results from mechanical testing, the results from microstructural analysis using light microscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) are also presented. The manner in which PWHT contributes to the creep resistance of the HAZ in P91 steel is demonstrated.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Materials & Design",
title = "Microstructures and mechanical properties of creep resistant steel for application at elevated temperatures",
pages = "667-660",
volume = "46",
doi = "10.1016/j.matdes.2012.10.057"
}

Milović, L., Vuherer, T., Blačić, I., Vrhovac, M.,& Stanković, M.. (2013). Microstructures and mechanical properties of creep resistant steel for application at elevated temperatures. in Materials & Design
Elsevier Sci Ltd, Oxford., 46, 660-667.
https://doi.org/10.1016/j.matdes.2012.10.057

Milović L, Vuherer T, Blačić I, Vrhovac M, Stanković M. Microstructures and mechanical properties of creep resistant steel for application at elevated temperatures. in Materials & Design. 2013;46:660-667.
doi:10.1016/j.matdes.2012.10.057 .

Milović, Ljubica, Vuherer, T., Blačić, Ivo, Vrhovac, Miran, Stanković, M., "Microstructures and mechanical properties of creep resistant steel for application at elevated temperatures" in Materials & Design, 46 (2013):660-667,
https://doi.org/10.1016/j.matdes.2012.10.057 . .

TY  - JOUR
AU  - Vuherer, T.
AU  - Dunder, M.
AU  - Milović, Ljubica
AU  - Zrilić, Milorad
AU  - Samardžić, Ivan
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2256
AB  - In the process of testing teal components exposed to elevated temperature, it is hot possible to neglect Cracks. The most significant cracks can be induced by welding, which is applied for joining of Structural components. Pressure equipment in service is also exposed to high pressure and high stresses. Materials for their manufacturing are designed to resist high stress at elevated temperature, and to meet requirements regarding creep resistance. The objective of this study is to investigate microstructure of different regions of the heat affected zone in T/P91 steels by using thermal simulation instead of welding.
PB  - Croatian Metallurgical Society
T2  - Metalurgija
T1  - Microstructural investigation of the heat-affected zone of simulated welded joint of p91 steel
EP  - 320
IS  - 3
SP  - 317
VL  - 52
UR  - https://hdl.handle.net/21.15107/rcub_technorep_2256
ER  - 

@article{
author = "Vuherer, T. and Dunder, M. and Milović, Ljubica and Zrilić, Milorad and Samardžić, Ivan",
year = "2013",
abstract = "In the process of testing teal components exposed to elevated temperature, it is hot possible to neglect Cracks. The most significant cracks can be induced by welding, which is applied for joining of Structural components. Pressure equipment in service is also exposed to high pressure and high stresses. Materials for their manufacturing are designed to resist high stress at elevated temperature, and to meet requirements regarding creep resistance. The objective of this study is to investigate microstructure of different regions of the heat affected zone in T/P91 steels by using thermal simulation instead of welding.",
publisher = "Croatian Metallurgical Society",
journal = "Metalurgija",
title = "Microstructural investigation of the heat-affected zone of simulated welded joint of p91 steel",
pages = "320-317",
number = "3",
volume = "52",
url = "https://hdl.handle.net/21.15107/rcub_technorep_2256"
}

Vuherer, T., Dunder, M., Milović, L., Zrilić, M.,& Samardžić, I.. (2013). Microstructural investigation of the heat-affected zone of simulated welded joint of p91 steel. in Metalurgija
Croatian Metallurgical Society., 52(3), 317-320.
https://hdl.handle.net/21.15107/rcub_technorep_2256

Vuherer T, Dunder M, Milović L, Zrilić M, Samardžić I. Microstructural investigation of the heat-affected zone of simulated welded joint of p91 steel. in Metalurgija. 2013;52(3):317-320.
https://hdl.handle.net/21.15107/rcub_technorep_2256 .

Vuherer, T., Dunder, M., Milović, Ljubica, Zrilić, Milorad, Samardžić, Ivan, "Microstructural investigation of the heat-affected zone of simulated welded joint of p91 steel" in Metalurgija, 52, no. 3 (2013):317-320,
https://hdl.handle.net/21.15107/rcub_technorep_2256 .

TY  - JOUR
AU  - Dondur, Nikola
AU  - Spasojević-Brkić, Vesna
AU  - Omić, Snežana
AU  - Milović, Ljubica
AU  - Sedmak, Tamara
PY  - 2012
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1995
AB  - Differences in total factor productivity of privatised and newly-founded private companies in Serbia are empirically estimated in this paper. On the panel data from a sample of 900 firms in three regions - Vojvodina, Central Serbia and Belgrade, it is found that majority foreign owned companies, as well as export-oriented and newly-founded businesses which did not undergo the process of ownership transformation recorded higher productivity than the average productivity in these regions. Regional inequality in companies' performance elasticity to foreign capital, exports and market concentration is also empirically proved.
PB  - Editura Stiintifica Fmr, Bucharest
T2  - Metalurgia International
T1  - Productivity after ownership transformation-serbian case
EP  - 57
IS  - 6
SP  - 50
VL  - 17
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1995
ER  - 

@article{
author = "Dondur, Nikola and Spasojević-Brkić, Vesna and Omić, Snežana and Milović, Ljubica and Sedmak, Tamara",
year = "2012",
abstract = "Differences in total factor productivity of privatised and newly-founded private companies in Serbia are empirically estimated in this paper. On the panel data from a sample of 900 firms in three regions - Vojvodina, Central Serbia and Belgrade, it is found that majority foreign owned companies, as well as export-oriented and newly-founded businesses which did not undergo the process of ownership transformation recorded higher productivity than the average productivity in these regions. Regional inequality in companies' performance elasticity to foreign capital, exports and market concentration is also empirically proved.",
publisher = "Editura Stiintifica Fmr, Bucharest",
journal = "Metalurgia International",
title = "Productivity after ownership transformation-serbian case",
pages = "57-50",
number = "6",
volume = "17",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1995"
}

Dondur, N., Spasojević-Brkić, V., Omić, S., Milović, L.,& Sedmak, T.. (2012). Productivity after ownership transformation-serbian case. in Metalurgia International
Editura Stiintifica Fmr, Bucharest., 17(6), 50-57.
https://hdl.handle.net/21.15107/rcub_technorep_1995

Dondur N, Spasojević-Brkić V, Omić S, Milović L, Sedmak T. Productivity after ownership transformation-serbian case. in Metalurgia International. 2012;17(6):50-57.
https://hdl.handle.net/21.15107/rcub_technorep_1995 .

Dondur, Nikola, Spasojević-Brkić, Vesna, Omić, Snežana, Milović, Ljubica, Sedmak, Tamara, "Productivity after ownership transformation-serbian case" in Metalurgia International, 17, no. 6 (2012):50-57,
https://hdl.handle.net/21.15107/rcub_technorep_1995 .

TY  - CONF
AU  - Aleksić, Vujadin
AU  - Milović, Ljubica
AU  - Kovacević, Zorica
PY  - 2012
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2161
AB  - In present paper, methodological approach to the analysis of the failures and recovery of the damages has been presented on an example of fracture and damage of a structure of the reloading bridge. The approach presented can be applied to various types of similar structures, and its application in preventive maintenance would contribute to extension of exploitation life of the reloading bridges.
PB  - University of Novi Sad, Fac Tech Sci, Adeko, Novi Sad
C3  - Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012
T1  - The failures of a supporting structure of a coal-reloading bridge and methodological approach to recovery of the damages
EP  - 108
SP  - 105
UR  - https://hdl.handle.net/21.15107/rcub_technorep_2161
ER  - 

@conference{
author = "Aleksić, Vujadin and Milović, Ljubica and Kovacević, Zorica",
year = "2012",
abstract = "In present paper, methodological approach to the analysis of the failures and recovery of the damages has been presented on an example of fracture and damage of a structure of the reloading bridge. The approach presented can be applied to various types of similar structures, and its application in preventive maintenance would contribute to extension of exploitation life of the reloading bridges.",
publisher = "University of Novi Sad, Fac Tech Sci, Adeko, Novi Sad",
journal = "Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012",
title = "The failures of a supporting structure of a coal-reloading bridge and methodological approach to recovery of the damages",
pages = "108-105",
url = "https://hdl.handle.net/21.15107/rcub_technorep_2161"
}

Aleksić, V., Milović, L.,& Kovacević, Z.. (2012). The failures of a supporting structure of a coal-reloading bridge and methodological approach to recovery of the damages. in Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012
University of Novi Sad, Fac Tech Sci, Adeko, Novi Sad., 105-108.
https://hdl.handle.net/21.15107/rcub_technorep_2161

Aleksić V, Milović L, Kovacević Z. The failures of a supporting structure of a coal-reloading bridge and methodological approach to recovery of the damages. in Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012. 2012;:105-108.
https://hdl.handle.net/21.15107/rcub_technorep_2161 .

Aleksić, Vujadin, Milović, Ljubica, Kovacević, Zorica, "The failures of a supporting structure of a coal-reloading bridge and methodological approach to recovery of the damages" in Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012 (2012):105-108,
https://hdl.handle.net/21.15107/rcub_technorep_2161 .

TY  - JOUR
AU  - Marković, S.
AU  - Lazović, T.
AU  - Milović, Ljubica
AU  - Stojiljković, B.
PY  - 2012
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1986
AB  - At the end of the 19th century, Serbia was among the first European countries to start electrification. A very bad economic situation, caused by centuries-old slavery and lack of capital, did not prevent the Serbs to start introducing electricity into settlements and a few industrial plants. They had the idea of introducing electricity implemented before many other more developed countries of Europe and the world. A great merit for this belongs to the Serbian scientist and inventor Nikola Tesla, as well as to his good friend Djordje M. Stanojević, the professor and rector of Belgrade University. The first electric power plant in Serbia, which produced direct electric current by coal combustion, was put into operation in Belgrade, the Serbian capital, in 1893, twelve years after Edison’s first such plant in the world. Also, the first hydroelectric power plant with three-phase alternating electric current in Serbia began operating in 1900, four years after the first power plant of its kind in the world (Niagara Falls, 1896). This hydropower plant, the first in the Balkans and one of the first in Europe, is described in this paper.
PB  - International Symposium on History of Machines and Mechanisms, HMM 2012
T2  - History of Mechanism and Machine Science
T1  - The first hydroelectric power plant in the Balkans built on the basis of Tesla’s principles
EP  - 406
SP  - 395
VL  - 15
DO  - 10.1007/978-94-007-4132-4_27
ER  - 

@article{
author = "Marković, S. and Lazović, T. and Milović, Ljubica and Stojiljković, B.",
year = "2012",
abstract = "At the end of the 19th century, Serbia was among the first European countries to start electrification. A very bad economic situation, caused by centuries-old slavery and lack of capital, did not prevent the Serbs to start introducing electricity into settlements and a few industrial plants. They had the idea of introducing electricity implemented before many other more developed countries of Europe and the world. A great merit for this belongs to the Serbian scientist and inventor Nikola Tesla, as well as to his good friend Djordje M. Stanojević, the professor and rector of Belgrade University. The first electric power plant in Serbia, which produced direct electric current by coal combustion, was put into operation in Belgrade, the Serbian capital, in 1893, twelve years after Edison’s first such plant in the world. Also, the first hydroelectric power plant with three-phase alternating electric current in Serbia began operating in 1900, four years after the first power plant of its kind in the world (Niagara Falls, 1896). This hydropower plant, the first in the Balkans and one of the first in Europe, is described in this paper.",
publisher = "International Symposium on History of Machines and Mechanisms, HMM 2012",
journal = "History of Mechanism and Machine Science",
title = "The first hydroelectric power plant in the Balkans built on the basis of Tesla’s principles",
pages = "406-395",
volume = "15",
doi = "10.1007/978-94-007-4132-4_27"
}

Marković, S., Lazović, T., Milović, L.,& Stojiljković, B.. (2012). The first hydroelectric power plant in the Balkans built on the basis of Tesla’s principles. in History of Mechanism and Machine Science
International Symposium on History of Machines and Mechanisms, HMM 2012., 15, 395-406.
https://doi.org/10.1007/978-94-007-4132-4_27

Marković S, Lazović T, Milović L, Stojiljković B. The first hydroelectric power plant in the Balkans built on the basis of Tesla’s principles. in History of Mechanism and Machine Science. 2012;15:395-406.
doi:10.1007/978-94-007-4132-4_27 .

Marković, S., Lazović, T., Milović, Ljubica, Stojiljković, B., "The first hydroelectric power plant in the Balkans built on the basis of Tesla’s principles" in History of Mechanism and Machine Science, 15 (2012):395-406,
https://doi.org/10.1007/978-94-007-4132-4_27 . .

TY  - JOUR
AU  - Aleksić, Vujadin
AU  - Milović, Ljubica
AU  - Kovačević, Zorica
PY  - 2012
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2065
AB  - In present paper, the methodological approach to the analysis of the causes of failures and to recovery of the damages has been presented using, as an example, the fracture and damage of a welded steel structure of a reloading bridge. The approach presented can be applied to various types of similar structures, and its application in preventive maintenance would contribute to extension of exploitation life of the reloading bridges.
PB  - Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Novi Sad
T2  - Machine Design
T1  - Recovery of the damages of a welded steel structure of a coal-reloading bridge: Methodological approach
EP  - 242
IS  - 4
SP  - 237
VL  - 4
UR  - https://hdl.handle.net/21.15107/rcub_technorep_2065
ER  - 

@article{
author = "Aleksić, Vujadin and Milović, Ljubica and Kovačević, Zorica",
year = "2012",
abstract = "In present paper, the methodological approach to the analysis of the causes of failures and to recovery of the damages has been presented using, as an example, the fracture and damage of a welded steel structure of a reloading bridge. The approach presented can be applied to various types of similar structures, and its application in preventive maintenance would contribute to extension of exploitation life of the reloading bridges.",
publisher = "Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Novi Sad",
journal = "Machine Design",
title = "Recovery of the damages of a welded steel structure of a coal-reloading bridge: Methodological approach",
pages = "242-237",
number = "4",
volume = "4",
url = "https://hdl.handle.net/21.15107/rcub_technorep_2065"
}

Aleksić, V., Milović, L.,& Kovačević, Z.. (2012). Recovery of the damages of a welded steel structure of a coal-reloading bridge: Methodological approach. in Machine Design
Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Novi Sad., 4(4), 237-242.
https://hdl.handle.net/21.15107/rcub_technorep_2065

Aleksić V, Milović L, Kovačević Z. Recovery of the damages of a welded steel structure of a coal-reloading bridge: Methodological approach. in Machine Design. 2012;4(4):237-242.
https://hdl.handle.net/21.15107/rcub_technorep_2065 .

Aleksić, Vujadin, Milović, Ljubica, Kovačević, Zorica, "Recovery of the damages of a welded steel structure of a coal-reloading bridge: Methodological approach" in Machine Design, 4, no. 4 (2012):237-242,
https://hdl.handle.net/21.15107/rcub_technorep_2065 .