Претраживање
Приказ резултата 1-10 од 31
Optimization of the production process through response surface method: Bricks made of loess
(Elsevier, 2013)
Loess clays are commonly used to produce bricks. Heavy clays, taken at location near Zrenjanin, Serbia, are used as a representative raw material in this study. The sample, containing about 28% of clay sized particles, is ...
Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method
(Elsevier Sci Ltd, Oxford, 2011)
High temperature hydrothermal syntheses, using calcium nitrate tetrahydrate, sodium dihydrogen phosphate and urea as precursors, and characterization of hydroxyapatite (HAp) whiskers are reported herein. The morphology and ...
Synthesis and characterization of Cr3+ doped TiO2 nanometric powders
(Elsevier, 2016)
Simple route was used for synthesis of nanostructured titania samples doped with 3 and 6 mol% of Cr3+ Titanium(IV)-isopropoxide and water were used as starting materials and as an agents for controlling hydrolysis and ...
Sensitivity analysis of mathematical models for final product properties: Link to DTG curve
(Elsevier Sci Ltd, Oxford, 2013)
Compressive strength and water absorption of fired heavy clay products varies with firing temperatures, but not entirely according to linear function, as it is mostly reported in literature. Also, differential thermo-gravimetric ...
Mechanical activation of talc in high-energy speed rotary mechanoactivator
(Elsevier LtdTechna Group S.r.l., 2012)
This paper presents the results of research on mechanical activation of raw talc in a high-energy speed rotary mechanoactivator. The results of research on effect of mechanically activated talc on the degree of recovery ...
Microstructure of LaNiO3 thin films obtained by the spin-on technique from citrate precursors
(Elsevier Sci Ltd, Oxford, 2008)
The morphology of perovskite LaNiO3 (LNO) thin films is a very important feature considering the fact that they could be used as an electrode material in ferroelectric devices. In this work, LNO films were prepared from ...
Prediction and fuzzy synthetic optimization of process parameters in heavy clay brick production
(Elsevier Sci Ltd, Oxford, 2013)
Many factors influence final clay brick properties, since the raw materials used are highly heterogeneous. Statistical analysis is rarely used, according to literature, but it would improve understanding of the overall ...
Influence of microstructure and phase composition on the nanoindentation characterization of bioceramic materials based on hydroxyapatite
(Elsevier Sci Ltd, Oxford, 2009)
The aim of the study was to investigate the influence of microstructure and phase composition on the mechanical behaviour of hydroxyapatite (HAp) and biphasic HAp/beta-tricalcium phosphate (beta-TCP) bioceramic materials ...
Phase transformation in cordierite gel synthesized by non-hydrolytic sol-gel route
(Elsevier Sci Ltd, Oxford, 2007)
Cordierite gel was synthesized by non-hydrolytic sol-gel route, starting from aluminum chloride, TEOS and magnesium chloride dissolved in absolute ethanol. Crystallization of p.-cordierite from gel at temperatures between ...
Microwave sintering of fine grained HAP and HAP/TCP bioceramics
(Elsevier Sci Ltd, Oxford, 2010)
The effect of microwave sintering conditions on the microstructure, phase composition and mechanical properties of materials based on hydroxyapatite (HAP) and tricalcium phosphate (TCP) was investigated. Fine grained ...