Search
Now showing items 1-10 of 6777
Application of non-equilibrium plasmas in top-down and bottom-up nanotechnologies and biomedicine
(Institute of Electrical and Electronics Engineers (IEEE), 2010)
In this paper we discuss how a better understanding of thermal and mainly non-thermal plasmas provides basis for their application in a number or nanotechnologies. One should bear in mind that one may design unique properties ...
The influence of the parameters of lost foam process on the quality of aluminum alloys castings / Uticaj parametara lost foam procesa na kvalitet odlivaka legura aluminijuma
(Association of Chemical Engineers of Serbia, 2010)
This paper presents the research results of application of Lost foam process for aluminum alloys castings of a simple geometry. The process characteristic is that patterns and gating of moulds, made of polymers, stay in ...
Determination of pesticides in surface and ground waters by liquid chromatography-electrospray-tandem mass spectrometry
(Elsevier, Amsterdam, 2010)
The sensitive multiresidual analytical method for simultaneous analysis of 14 most commonly used agricultural pesticides in Serbia was developed and optimized. The selected insecticides, fungicides and herbicides belong ...
Optimization Approach for Continuous Catalytic Regenerative Reformer Processes
(Amer Chemical Soc, Washington, 2010)
The new approach for simulation and optimization of a continuous catalytic regenerative (CCR) reformer process is proposed. Typical CCR reforming processes consist of three to four reactors with recycle. The reaction ...
Fast evaluation of periodic operation of a heterogeneous reactor based on nonlinear frequency response analysis
(Pergamon-Elsevier Science Ltd, Oxford, 2010)
The concept of higher-order frequency response functions (FRFs), which is based on Volterra series representation of nonlineral systems, is used to analyse the time-average performance of a perfectly mixed reactor subject ...
Microstructural investigations of the simulated heat affected zone of the creep resistant steel P91
(Taylor & Francis Ltd, Abingdon, 2010)
The microstructural changes in the heat affected zone (HAZ) of 9% chromium ferritic steel for manufacturing fossil fired power plant components are investigated. The heat treatment region of 925 degrees C in HAZ was tested ...
Effects of Filler Content on Mechanical Properties of Macroporous Composites
(Vsp Bv, Leiden, 2010)
The mechanical properties of hydroxyapatite related macroporous biocomposites (MPBs) are influenced by a number of factors, such as the pore size, the filler content and the properties of the matrix and the inclusion. ...
Formation of differential equations for determination of the electrical conductivity of water solutions of electrolytes / Formiranje diferencijalnih jednačina za određivanje električne provodljivosti vodenih rastvora elektrolita
(Društvo za sunčevu energiju "Srbija solar", Zrenjanin, 2010)
This work deals with the formation of the system of approximate linear differential equations of the first order for approximate determination of the electrical conductivity of the sulfur acid and kalium-hydroxide water ...
Antioxidants from lamiaceae herbs
(Food Quality: Control, Analysis and Consumer Concerns, 2011)
One of the important trends in the food industry today is the demand for natural antioxidants from plant material. Synthetic antioxidants such as butylated hydroxytoluene (BHT), and butylated hydroxyanisole (BHA) now being ...
1-Butanol + hexylamine plus n-heptane at temperature range (288.15-323.15 K): Experimental density data, excess molar volumes determination and modeling with cubic EOS
(Elsevier Science Bv, Amsterdam, 2010)
Densities rho of the ternary system 1-butanol + hexylamine + n-heptane and binaries: 1-butanol + hexylamine and hexylamine + n-heptane within the temperature range (288.15-323.15K) and atmospheric pressure are reported. ...