Претраживање
Приказ резултата 21-30 од 39
Biocomposite membranes of highly methylated pectin and mesoporous silica SBA-15
(Elsevier Ltd., 2014)
Manufacturing of synthetic composites consumes huge energy and their disposal at the end of the life cycle is very difficult since there is virtually no recycling option. Therefore, biocomposite materials have recently ...
Nanoindentation study of nickel manganite ceramics obtained by a complex polymerization method
(Elsevier Sci Ltd, Oxford, 2016)
The chemical synthesis of nickel manganite powder was performed by a complex polymerization method (CPM). The obtained fine nanoscaled powders were uniaxially pressed and sintered at different temperatures: 1000-1200 degrees ...
Mg/Cu co-substituted hydroxyapatite - Biocompatibility, mechanical properties and antimicrobial activity
(Elsevier Sci Ltd, Oxford, 2019)
The aim of this study was to improve the mechanical properties and to optimize antimicrobial activity of hydroxyapatite (HAP) by simultaneous doping with Mg and Cu ions in order to obtain material that would be able to ...
Composite materials from fully bio-based thermosetting resins and recycled waste poly(ethylene terephthalate)
(Elsevier Sci Ltd, Oxford, 2018)
During the last two decades, interest in bio-based polymers, especially in bio-based composite materials, has grown as a result of environmental concerns. In this paper new composites obtained from fully bio-based unsaturated ...
Effect of mechanical activation on carbothermal synthesis and densification of ZrC
(Elsevier Ltd, 2023)
Zirconium carbide ceramics were prepared by carbothermal reduction of ZrO2 and C that were mixed by high-energy ball milling. Powders were milled for times from 0 to 120 min in air. As milling time increased, the surface ...
Initial microstructure effect on the mechanical properties of Ti-6Al-4V ELI alloy processed by high-pressure torsion
(Elsevier Science Sa, Lausanne, 2018)
effect of initial microstructure on the mechanical properties and fracture mode of the Ti-6Al-4V ELI alloy subjected to the high-pressure torsion (HPT) processing at room temperature and 500 degrees C was investigated. In ...
Composition-property relationship of polyurethane networks based on polycaprolactone diol
(Springer, New York, 2021)
This work was focused on the synthesis of polyurethane networks (PUNs) based on polycaprolactone (PCL) as soft segment (SS) and Boltorn (R) aliphatic hyperbranched polyester of the second pseudo generation and 4,4 ...
A closed cycle of sustainable development: Effective removal and desorption of lead and dyes using an oxidized cellulose membrane
(Elsevier B.V., 2023)
Oxidized cotton linters, TOCell, were used as an adsorbent or derived membrane there from by linters
cross-linking with citric acid. The adsorption/desorption study of Pb2+, methylene blue (MB), and crystal
violet (CV) ...
Determination of the ductile-to-brittle transition temperature of NIOMOL 490 K steel welded joints
(Elsevier B.V., 06-2024)
This paper is dedicated to the ductile–brittle transition behaviour of the microalloyed structural steel NIOMOL 490 K. This steel grade is used for welded pressure vessels subjected to dynamic loads and operating at sub-zero ...
Solvent effects on structural changes in self-healing epoxy composites
(Elsevier Science Sa, Lausanne, 2020)
Nowadays, there is a very high importance of composite research and variety of their applications in the modern world. In that sense, we researched hollow glass capillaries filled with dissolved Grubbs catalyst (GC) and ...