Pretraživanje
Prikaz rezultata 1-10 od 74
Micromechanical properties of a hydroxyapatite/poly-L-lactide biocomposite using nanoindentation and modulus mapping
(Elsevier Sci Ltd, Oxford, 2007)
Biocomposites with ceramic fillers and polymer matrix are becoming attractive materials for bone tissue replacements. Nanoindentation has been used to locally characterize the surface mechanical properties of the ...
Dynamic mechanical properties and in vitro bioactivity of PHBHV/HA nanocomposite
(Elsevier Sci Ltd, Oxford, 2007)
Biopolymer composite materials for potential medical applications are of current research interest. In this study, a nanocomposite based on bioresorbable polymer-poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) was ...
The use of image analysis for the study of interfacial bonding in solid composite propellant / Korišćenje analize slike za određivanje interakcija u čvrstim kompozitnim gorivima
(Serbian Chemical Society, Belgrade, 2007)
In the framework of this research, the program Image Pro Plus was applied for determining the polymer-oxidizer interactions in HTPB-based composite propellants. In order to improve the interactions, different bonding agents ...
Influence of heat treatment on mechanical and sorptional properties of viscose-based nonwovens
(Niscair, 2005)
The influence of heat treatment on sorptional and mechanical properties of viscose: polypropylene (90:10) blend nonwoven fleeces has been studied. It is observed that the heat treatment improves mechanical properties ...
Improvement of the mechanical properties of spark plasma sintered hap bioceramics by decreasing the grain size and by adding multi-walled carbon nanotubes
(International Institute for the Science of Sintering, Beograd, 2013)
Composites based on HAP and oxidized multi-walled carbon nanotubes (o-MWCNT) and monophase HAP materials were processed by spark plasma sintering. Starting from stoichiometric nano-sized HAP powder, monophase bioceramics ...
Effect of the Degree of Conversion on Mechanical Properties and Monomer Elution from Self-, Dual- and Light-Cured Core Composites
(Materials, 2021)
The objective of this work was to measure and correlate the degree of conversion (DC), mechanical properties and monomer elution from self-, dual- and light-cured core composites. Five samples of each of the following ...
Poly[(N-isopropylacrylamide)-co-(itaconic acid)] hydrogels with poly(ethylene glycol)
(Wiley, Hoboken, 2010)
The aim of the work reported here was to investigate temperature- and pH-sensitive hydrogels of N-isopropylacrylamide (NIPAM) and itaconic acid (IA) and their semi-interpenetrating polymer networks (semi-IPNs) with varying ...
Mechanical properties of biomorphic silicon carbide ceramics
(International Institute for the Science of Sintering, Beograd, 2011)
Biomorphous β-SiC ceramics were produced from linden wood by impregnation with tetraethyl orthosilicate (TEOS), followed pyrolysis and high temperature treatment at 1580°C. Six specimen groups included charcoal and five ...
Preparation and properties of low cement castable sintered at different temperatures
(University of Novi Sad, 2009)
The low cement high alumina castable (LCC) studied in this paper was synthesised, cured and then treated at different sintering temperatures. Since any inhomogeneity introduced during the castable preparation can remain ...
Cavitation resistance of composite polyester resin/basalt powder
(Society for Structural Integrity and Life, Institute for Material Testing, 2019)
The paper presents the results of research on cavitation resistance of the composite based on unsaturated polyester resin and basalt powder, as reinforcement. Basalt powder was obtained by grinding and micronising basaltic ...