Претраживање
Приказ резултата 1-10 од 820
Gravimetric and instrumental methods comparison for experimental determination of carbonate carbon content in solid mineral fuels
(Thermal Science, 2022)
The content of combustible elements in solid mineral fuels (carbon, hydrogen, etc.) are very important, since they most directly affect the heat value. It should be noted that the fuel heat value depends on many other ...
Examination and optimization of lignocellulolytic activity of Stereum gausapatum F28 on beechwood sawdust supplemented with molasses stillage
(Journal of the Serbian Chemical Society, 2022)
This study provides a detailed analysis of the lignocellulolytic activity of a new isolate Stereum gausapatum F28, a Serbian autochthonous fungi, on beechwood sawdust supplemented with cheap waste, sugar beet molasses still ...
Effect of process parameters on the phase transformation kinetics in copper-based alloys and composites
(Metallurgical & Materials Engineering, 2020)
Copper-based alloys and composites, owing to their convenient properties, are being considered essential materials in various industries. Since copper possesses an ability to develop high corrosion resistance, putting it ...
Transformation tools enabling the implementation of nature-based solutions for creating a resourceful circular city
(Blue-Green Systems, 2020)
The linear pattern of production-consumption-disposal of cities around the world will continue to increase the emission of pollutants and stocks of waste, as well as to impact on the irreversible deterioration of non-renewable ...
Modeling of disperse dye adsorption on modified polyester fibers
(University of Novi Sad, Faculty of Technology, 2020)
The results of the research on the ability of adsorption of dye on polyester fibers at a temperature of 98 °C are presented in this paper. The fibers were previously modified in aqueous solutions of NaOH, KOH or Al(OH)3. ...
Ambient air particles: The use of ion chromatography and multivariate techniques in the analysis of water-soluble substances
(Journal of the Serbian Chemical Society, 2021)
Seventeen water-soluble substances (of sodium, ammonium, potas-sium, magnesium, calcium, formate, methanesulfonate, glyoxylate, chloride, nitrite, nitrate, glutarate, succinate, malate, malonate, sulfate and oxalate) in ...
Optimization of Methanol Synthesis under Forced Periodic Operation
(Processes, 2021)
Traditionally, methanol is produced in large amounts from synthesis gas with heterogeneous Cu/ZnO/Al2O3 catalysts under steady state conditions. In this paper, the potential of alternative forced periodic operation modes ...
An Investigation into Mechanical Properties and Printability of Potential Substrates for Inkjet Printing of Orodispersible Films
(Pharmaceutics, 2021)
Inkjet printing is novel approach in drug manufacturing that enables dispensing precise volumes of ink onto substrates. Optimal substrate properties including suitable mechanical characteristic are recognized as crucial ...
Amides as a model system of low molar mass algal organic matter. Influence on the adsorption of p-nitrophenol on activated carbon
(Elsevier, Amsterdam, 2020)
In this study, the adsorption equilibrium and diffusivity parameters of p-nitrophenol were estimated for water containing different concentrations of secondary amides. Commercial powdered activated carbon was used as an ...
Mechanical Oscillations in 2D Collective Cell Migration: The Elastic Turbulence
(Frontiers Media Sa, Lausanne, 2020)
Various types of mechanical waves, such as propagative waves and standing waves, are observed during 2D collective cell migration. Propagative waves are generated during monolayer free expansion, whereas standing waves are ...