Search
Now showing items 1-10 of 6587
A Novel ceramic tubular membrane coated with a continuous graphene-TiO2 nanocomposite thin-film for CECs mitigation
(Chemical Engineering Journal, 2022)
This work presents a ceramic tubular membrane coated with a continuous graphene-TiO2 nanocomposite thin-film for contaminants of emerging concern (CECs) removal from synthetic and real matrices in single-pass flow-through ...
Modified tannins for alkyd based anticorrosive coatings / Primena modifikovanih tanina u antikorozionim alkidnim premazima
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and their use in alkyd based coatings to improve anticorrosive properties is presented in this work. Two methods of tannin ...
Selective magnetic GMA based potential sorbents for molybdenum and rhenium sorption
(Elsevier Science Sa, Lausanne, 2017)
Magnetic macroporous crosslinked copolymer glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EGDMA) samples with different magnetite content were prepared by suspension copolymerization and functionalized ...
The comparative study of the corrosion stability of Zn-Ni-Co alloy coatings deposited from chloride and sulphate baths / Uporedna analiza korozione stabilnosti prevlaka Zn-Ni-Co legura elektrohemijski taloženih iz hloridnih i sulfatnih rastvora
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
The ternary Zn-Ni-Co alloy coatings were electrodeposited on steel from chloride and sulphate baths. The deposition was carried out galvanostatically at different current densities at ambient temperatures from additives ...
Impact testing with controlled energy of multiaxial aramid fabrics with various types of reinforcement / Ispitivanje udarima kontrolisane energije multiaksijalnih aramidnih lamina sa različitim tipovima ojačanja
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The physical and mechanical properties of the six samples of polyurethane/p-aramid multiaxial fabric forms (Kolon fabrics) were analyzed by high speed impact tester. The samples were impregnated with 10 wt.% poly (vinyl ...
Back to basics: avoiding errors in scientific research and publications
(Savez hemijskih inženjera, Beograd, 2019)
Ad-hoc intercomparison of four different radon exhalation measurement methods
(Oxford Univ Press, Oxford, 2018)
It is indicated that the exposure to radon originating from the building materials is not negligible and the radon exhalation measurement should get more attention in the future. The experience with four different methods ...
Intensification of a chemical reactor for methanol synthesis through forced periodic operations- Evaluation based on Nonlinear Frequency Response Analysis
(2nd International Process Intensification Conference, Leuven, Belgium, 2019)
In this work, the NFR method is implemented for evaluation of possible improvement for the reaction of methanol synthesis by hydrogenation of CO and CO2, using a standard Cu/ZnO/Al2O3 catalyst. For start, a forced periodically ...
Life Cycle Impact Assessment of Miscanthus Crop for Sustainable Household Heating in Serbia
(MDPI, Basel, 2018)
This paper investigates the environmental impacts and energy benefits of the cultivation of Miscanthus (Miscanthus x giganteus Greef et Deu.), in order to initiate its use in sustainable household heating in the Republic ...
(31)P NMR investigation of some microporous zincophosphates
(Serbian Chemical Society, 1996)
High field magic-angle spinning (MAS) (31)P-NMR investigations of novel porous zincophosphates and their cobalt-containing derivatives confirm the framework structure of alternating Zn(Co)O4 and PO4 tetrahedra. The MAS NMR ...