Search
Now showing items 31-40 of 64
INFLUENCE OF ELECTRODEPOSITION REGIME AND Sn:Pd RATIOS IN Sn-Pd ELECTROCATALYSTS ON ETHANOL OXIDATION REACTION / ВЛИЈАНИЕ НА РЕЖИМОТ НА ЕЛЕКТРОДЕПОЗИЦИЈАТА И НА ОДНОСИТЕ НА Sn:Pd ВО Sn-Pd-ЕЛЕКТРОКАТАЛИЗАТОРИТЕ ВРЗ ОКСИДАЦИЈАТА НА ЕТАНОЛОТ
(Society of Chemists and Technologists of Macedonia, 2023)
A series of bimetallic Sn-Pd catalysts were prepared by a template-free two step electrodeposition method. According to this method, Sn was electrodeposited firstly in potentiostatic or galvanostatic regime on Cu electrodes ...
Mass transfer in inverse fluidized beds / Prenos mase u inverzno fluidizovanom sloju
(Serbian Chemical Society, 2023)
In this work, the coefficient of fluid-wall mass transfer in an inverse fluidized bed was determined using the adsorption method. The experiments were carried out in a column with a diameter of 45 mm with spherical and ...
Disparate soil textures as a native medium for As(V) and Pb(II) separation from aqueous systems
(Desalination Publications, 2022)
This study investigated the use of different natural raw soil materials as low-cost adsorbents for
the removal to remove As(V) and Pb(II) from aqueous systems. It deals with the effect of different soil textures, sandy ...
Microstructure, hardness and fracture resistance of P235TR1 seam steel pipes of different diameters / Otpornost prema lomu, tvrdoća i mikrostruktura šavnih cevi različitog prečnika izrađenih od čelika P235TR1
(Association of the Chemical Engineers of Serbia, 2023)
Steel pipelines in industrial plants consist of different elements, including seamless and/or welded (seam) pipes. Properties of welded pipes, including their fracture behaviour, depend on the characteristics of both, the ...
J-integral Analysis of the Simulated Heat-affected Zone of the Elevated-temperature Martensitic Steel
(Experimental Techniques, 2022)
Due to its superior strength at high temperatures P/T91 steel is often applied in the chemical, petrochemical and fossil-fired power generation industries. The high strength is achieved by a suitable martensitic microstructure ...
Thermo-mechanical analysis of linear welding stage in friction stir welding Influence of Welding Parameters
(VINČA Institute of Nuclear Sciences, 2022)
The influence of friction stir welding parameters on thermo-mechanical behavior of the material during welding is analyzed. An aluminum alloy is considered (Al 2024 T351), and different rotating and welding speeds are ...
Forced Periodic Operation of Methanol Synthesis in an Isothermal Gradientless Reactor
(John Wiley and Sons Inc, 2022)
Methanol synthesis from synthesis gas with heterogeneous Cu/ZnO/Al2O3 catalysts in an isothermal gradientless reactor is described. In a theoretical study, the potential of forced periodic operation (FPO) for improving ...
Influence Of Radiation On The Stability Of Electrical Filters Characteristics As Components For Overvoltage Protection
(Vinca Inst Nuclear Sci, 2022)
The paper represents the results of testing the effect of neutron and gamma radiation of radioactive 60 Co on electrical filters. Neutron and gamma radiation was chosen because of its conductivity. The analysis of the ...
INFLUENCE OF GASEOUS LASER IN CONTINUOUS-WAVE AND PULSE REGIMES ON BIOMATERIAL CHARACTERISTICS / УТИЦАЈ ГАСНИХ ЛАСЕРА У КОНТИНУАЛНОМ И ИМПУЛСНОМ РЕЖИМУ НА КАРАКТЕРИСТИКЕ БИОМАТЕРИЈАЛА
(Vinca Inst Nuclear Sci, 2023)
Aromatic plants and laser beam wavelength in the red range of visible spectra (623.8 nm), most commonly used for treating plant species, were selected. As there is not much information in the references, it is necessary ...
Dispersive liquid–liquid microextraction and Monte Carlo simulation of margin of safety for octocrylene, EHMC, 2ES, and homosalate in sunscreens
(John Wiley and Sons Ltd., 2023)
Dispersive liquid–liquid microextraction (DLLME) using a floating organic drop has been optimized and used for the sample preparation of four commonly used ultraviolet filter (UVF) substances in sunscreens. Plackett–Burman ...