The porosity and roughness of electrodeposited calcium phosphate coatings in simulated body fluid
Апстракт
Calcium phosphate coatings were electrochemically deposited on titanium from an aqueous solution of Ca(NO3)(2) and NH4H2PO4 at a current density of 10 mA cm(-2) for a deposition time of 15 mm. The obtained brushite coatings (CaHPO4 center dot 2H(2)O), were converted to hydroxyapatite (HA) by soaking in simulated body fluid (SBF) for 2, 7 and 14 days. The brushite and hydroxyapatite coatings were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). It was shown that increasing the soaking time increased the porosity, roughness and crystallite domain size of the HA coatings and decreased the unit cell parameters and unit cell volume, while the mean pore area of HA was unaffected. The calcium and phosphorus ions concentrations in SBF were determined by atomic absorption spectroscopy (AAS) and UV-Vis spectroscopy, respectively, and a mechanism of HA growth based on dissolution-precipitation was proposed.
Кључне речи:
hydroxyapatite / brushite / coatings / nanostructures / titaniumИзвор:
Journal of the Serbian Chemical Society, 2015, 80, 2, 237-251Издавач:
- Srpsko hemijsko društvo, Beograd
Финансирање / пројекти:
- Синтеза, развој технологија добијања и примена наноструктурних мултифункционалних материјала дефинисаних својстава (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45019)
- Магнетни и радионуклидима обележени наноструктурни материјали за примене у медицини (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45015)
- Феномени и процеси синтезе нових стакластих и наноструктурних стакло-керамичких материјала (RS-MESTD-Basic Research (BR or ON)-172004)
DOI: 10.2298/JSC140626098D
ISSN: 0352-5139
WoS: 000351326300011
Scopus: 2-s2.0-84924984599
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Đošić, Marija AU - Mitrić, Miodrag AU - Mišković-Stanković, Vesna PY - 2015 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3010 AB - Calcium phosphate coatings were electrochemically deposited on titanium from an aqueous solution of Ca(NO3)(2) and NH4H2PO4 at a current density of 10 mA cm(-2) for a deposition time of 15 mm. The obtained brushite coatings (CaHPO4 center dot 2H(2)O), were converted to hydroxyapatite (HA) by soaking in simulated body fluid (SBF) for 2, 7 and 14 days. The brushite and hydroxyapatite coatings were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). It was shown that increasing the soaking time increased the porosity, roughness and crystallite domain size of the HA coatings and decreased the unit cell parameters and unit cell volume, while the mean pore area of HA was unaffected. The calcium and phosphorus ions concentrations in SBF were determined by atomic absorption spectroscopy (AAS) and UV-Vis spectroscopy, respectively, and a mechanism of HA growth based on dissolution-precipitation was proposed. PB - Srpsko hemijsko društvo, Beograd T2 - Journal of the Serbian Chemical Society T1 - The porosity and roughness of electrodeposited calcium phosphate coatings in simulated body fluid EP - 251 IS - 2 SP - 237 VL - 80 DO - 10.2298/JSC140626098D ER -
@article{ author = "Đošić, Marija and Mitrić, Miodrag and Mišković-Stanković, Vesna", year = "2015", abstract = "Calcium phosphate coatings were electrochemically deposited on titanium from an aqueous solution of Ca(NO3)(2) and NH4H2PO4 at a current density of 10 mA cm(-2) for a deposition time of 15 mm. The obtained brushite coatings (CaHPO4 center dot 2H(2)O), were converted to hydroxyapatite (HA) by soaking in simulated body fluid (SBF) for 2, 7 and 14 days. The brushite and hydroxyapatite coatings were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). It was shown that increasing the soaking time increased the porosity, roughness and crystallite domain size of the HA coatings and decreased the unit cell parameters and unit cell volume, while the mean pore area of HA was unaffected. The calcium and phosphorus ions concentrations in SBF were determined by atomic absorption spectroscopy (AAS) and UV-Vis spectroscopy, respectively, and a mechanism of HA growth based on dissolution-precipitation was proposed.", publisher = "Srpsko hemijsko društvo, Beograd", journal = "Journal of the Serbian Chemical Society", title = "The porosity and roughness of electrodeposited calcium phosphate coatings in simulated body fluid", pages = "251-237", number = "2", volume = "80", doi = "10.2298/JSC140626098D" }
Đošić, M., Mitrić, M.,& Mišković-Stanković, V.. (2015). The porosity and roughness of electrodeposited calcium phosphate coatings in simulated body fluid. in Journal of the Serbian Chemical Society Srpsko hemijsko društvo, Beograd., 80(2), 237-251. https://doi.org/10.2298/JSC140626098D
Đošić M, Mitrić M, Mišković-Stanković V. The porosity and roughness of electrodeposited calcium phosphate coatings in simulated body fluid. in Journal of the Serbian Chemical Society. 2015;80(2):237-251. doi:10.2298/JSC140626098D .
Đošić, Marija, Mitrić, Miodrag, Mišković-Stanković, Vesna, "The porosity and roughness of electrodeposited calcium phosphate coatings in simulated body fluid" in Journal of the Serbian Chemical Society, 80, no. 2 (2015):237-251, https://doi.org/10.2298/JSC140626098D . .