The influence of alumina particle modification on the adhesion of the polyacrylate matrix composite films and the metal substrate
Само за регистроване кориснике
2019
Аутори
Ashor, Almabrok A.Vuksanović, Marija M.
Tomić, Nataša
Marinković, Aleksandar
Jančić-Heinemann, Radmila
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Adhesion behavior between the composite films, consisting of UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina particles, Al2O3 Fe, modified with 3-aminopropyl)tri - methoxysilane (AM) and methyl esters of linseed oil fatty acids (biodiesel - BD) used as a reinforcement, and metallic surface was investigated in this study. Al2O3 Fe-BD particles showed pronounced hydrophobicity and hydrolytic stability of alumina surface. Adhesive and mechanical properties of prepared composites, containing 0.5, 1.5 and 3 wt. % of surface modified Al2O3 Fe-AM and Al2O3 Fe-BD particles, were compared to the neat polymer matrix. Adhesion parameter was evaluated using the micro hardness testing method. The comparison of determined contact angle with adhesive parameter, obtained from micro hardness measurements, was discussed in relation to structural effect of reinforcement used.
Кључне речи:
Polymer-matrix composites (PMCs) / adhesion / microstructures / electron microscopyИзвор:
Composite Interfaces, 2019, 26, 5, 417-430Издавач:
- Taylor & Francis Ltd, Abingdon
Финансирање / пројекти:
- Развој опреме и процеса добијања полимерних композитних материјала са унапред дефинисаним функционалним својствима (RS-MESTD-Technological Development (TD or TR)-34011)
DOI: 10.1080/09276440.2018.1506240
ISSN: 0927-6440
WoS: 000457704800003
Scopus: 2-s2.0-85052075199
Колекције
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Ashor, Almabrok A. AU - Vuksanović, Marija M. AU - Tomić, Nataša AU - Marinković, Aleksandar AU - Jančić-Heinemann, Radmila PY - 2019 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4325 AB - Adhesion behavior between the composite films, consisting of UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina particles, Al2O3 Fe, modified with 3-aminopropyl)tri - methoxysilane (AM) and methyl esters of linseed oil fatty acids (biodiesel - BD) used as a reinforcement, and metallic surface was investigated in this study. Al2O3 Fe-BD particles showed pronounced hydrophobicity and hydrolytic stability of alumina surface. Adhesive and mechanical properties of prepared composites, containing 0.5, 1.5 and 3 wt. % of surface modified Al2O3 Fe-AM and Al2O3 Fe-BD particles, were compared to the neat polymer matrix. Adhesion parameter was evaluated using the micro hardness testing method. The comparison of determined contact angle with adhesive parameter, obtained from micro hardness measurements, was discussed in relation to structural effect of reinforcement used. PB - Taylor & Francis Ltd, Abingdon T2 - Composite Interfaces T1 - The influence of alumina particle modification on the adhesion of the polyacrylate matrix composite films and the metal substrate EP - 430 IS - 5 SP - 417 VL - 26 DO - 10.1080/09276440.2018.1506240 ER -
@article{ author = "Ashor, Almabrok A. and Vuksanović, Marija M. and Tomić, Nataša and Marinković, Aleksandar and Jančić-Heinemann, Radmila", year = "2019", abstract = "Adhesion behavior between the composite films, consisting of UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina particles, Al2O3 Fe, modified with 3-aminopropyl)tri - methoxysilane (AM) and methyl esters of linseed oil fatty acids (biodiesel - BD) used as a reinforcement, and metallic surface was investigated in this study. Al2O3 Fe-BD particles showed pronounced hydrophobicity and hydrolytic stability of alumina surface. Adhesive and mechanical properties of prepared composites, containing 0.5, 1.5 and 3 wt. % of surface modified Al2O3 Fe-AM and Al2O3 Fe-BD particles, were compared to the neat polymer matrix. Adhesion parameter was evaluated using the micro hardness testing method. The comparison of determined contact angle with adhesive parameter, obtained from micro hardness measurements, was discussed in relation to structural effect of reinforcement used.", publisher = "Taylor & Francis Ltd, Abingdon", journal = "Composite Interfaces", title = "The influence of alumina particle modification on the adhesion of the polyacrylate matrix composite films and the metal substrate", pages = "430-417", number = "5", volume = "26", doi = "10.1080/09276440.2018.1506240" }
Ashor, A. A., Vuksanović, M. M., Tomić, N., Marinković, A.,& Jančić-Heinemann, R.. (2019). The influence of alumina particle modification on the adhesion of the polyacrylate matrix composite films and the metal substrate. in Composite Interfaces Taylor & Francis Ltd, Abingdon., 26(5), 417-430. https://doi.org/10.1080/09276440.2018.1506240
Ashor AA, Vuksanović MM, Tomić N, Marinković A, Jančić-Heinemann R. The influence of alumina particle modification on the adhesion of the polyacrylate matrix composite films and the metal substrate. in Composite Interfaces. 2019;26(5):417-430. doi:10.1080/09276440.2018.1506240 .
Ashor, Almabrok A., Vuksanović, Marija M., Tomić, Nataša, Marinković, Aleksandar, Jančić-Heinemann, Radmila, "The influence of alumina particle modification on the adhesion of the polyacrylate matrix composite films and the metal substrate" in Composite Interfaces, 26, no. 5 (2019):417-430, https://doi.org/10.1080/09276440.2018.1506240 . .