Search
Now showing items 21-30 of 1030
Influence of hematite nanorods on the mechanical properties of epoxy resin
(Srpsko hemijsko društvo, Beograd, 2017)
The mechanical properties of nanocomposites obtained by incorporation of fairly uniform hematite nanorods (alpha-Fe2O3 NRs) into epoxy resin were studied as a function of the content of the inorganic phase. A thorough ...
Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites
(Elsevier Sci Ltd, Oxford, 2017)
The influence of modification and vacuum/supercritical CO2 (scCO(2)) drying methods on the surface properties, morphology and thermal stability of cellulose nanocrystals (NC) was presented in this study. Introduction of ...
Structural, Morphological and Electrical Properties of Alumina/YAG Composites as Solid Electrolyte for IT - SOFC
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
Alumina/YAG composites (AYX_t) with high relative density (99.2 %TD) were successfully obtained by mixing commercial alumina powder with different volume fractions of yttrium aluminium garnet (Y3Al5O12-YAG; 7, 14, 21 and ...
Visible light absorption of TiO2 nanoparticles surface-modified with vitamin B-6: A comparative experimental and DFT study
(Srpsko hemijsko društvo, Beograd, 2018)
Surface modification of titanium dioxide nanoparticles (TiO2 NPs) with the biologically active molecule pyridoxine hydrochloride (vitamin B-6) was found to alter the optical properties. Microstructural characterization ...
Nimonic 263 microstructure and surface characterization after laser shock peening
(Croatian Metallurgical Soc, Zagreb, 2015)
The Laser Shock Peening (LSP) is applied to the surface of Nimonic 263 alloy. The changes in microstructure and surface topography are observed and analyzed by Scanning Electron Microscopy (SEM), profilometer and microhardness ...
Microvickers hardness determination of unsaturated polyester resins reinforced with alumina based reinforcement / Ispitivanje mikrotvrdoće nezasićenih poliestarskih smola sa ojačanjima na bazi aluminijum oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Commercial alumina wiskers (Al2O3 w) and synthesized alumina particles via sol-gel technique (Al2O3 m) were used as reinforcement in unsaturated polyester resins (UPR). Composite materials with the addition of 0.1 wt. %, ...
Degradation of nicosulfuron using fenton and fenton-like reactions
(Savez hemijskih inženjera, Beograd, 2018)
Nicosulfuron, a sulfonylurea herbicide, was subjected to different Fenton reactions at pH of a nicosulfuron aqueous solution (pH 5). Usually, the optimal pH for the Fenton reaction is between 3 and 4, but the addition of ...
High performance alkyd resins synthesized from postconsumer PET bottles
(Royal Soc Chemistry, Cambridge, 2015)
The glycolytic recycling of waste PET presents a challenge for the production of secondary value-added products, such as alkyd resins. A way to overcome the unsatisfactory mechanical, drying and chemical resistance properties ...
Twenty-four position tilt test for accelerometer cross-axial sensitivity compensation / Kompensacija poperečnoj čuvstvitel'nosti MËMS akselerometrov s pomošč'ju testirovanija statičnogo ugla naklona, provedennogo v 24-eh pozicijah
(University of Defence in Belgrade, 2017)
Cross-axial or transverse sensitivity of an accelerometer can be compensated by digital processing of the output signal. To perform this, it is necessary to determine coefficients that describe a sensor's response to ...
Photocatalytic Performance of Carbon Monolith/TiO2 Composite
(Hindawi Ltd, London, 2015)
The new and simple approach for deposition of catalytically active TiO2 coating on carbon monolith (CM) carrier was presented. CM photocatalysts were impregnated with TiO2 using titanium solution and thermal treatment, and ...