Претраживање
Приказ резултата 861-870 од 870
Electrochemical stability of gold complex based on mercaptotriazole at optimal condition
(Springer Science and Business Media Deutschland GmbH, 2022)
This study investigates the electrochemical stability of the gold complex based on mercaptotriazole at an optimum pH of nine in the electrolyte with a gold concentration of 2.5 g dm−3. The stability of the complex was ...
Prospective of the LDI MS to characterization the corrosion products of silver-copper alloys on an example of the Ag-Cu-X (X- Zn, Pd, In) system
(Elsevier B.V., 2023)
This work presents the perspective of applying the laser desorption/ionization mass spectrometry (LDI MS) for characterization the anode film of the Ag60Cu26Zn14, Ag58.5Cu31.5Pd10, and Ag63Cu27In10 alloys (at high ...
E-scrap processing: Theory and practice
(De Gruyter, 2021)
The importance of recycling the waste electrical and electronic equipment (WEEE), in recent years, has been taken into increasing concern and consideration not only by the government, but also by their hazardous material ...
Multicomponent solid solution with pyrochlore structure / Solución sólida multicomponente con estructura de pirocloro
(Sociedad Espanola de Ceramica y Vidrio, 2023)
Multicomponent oxide with pyrochlore structure (A2B2O7), containing 7 different A-site cations and 3 B-site cations in equiatomic amounts, was synthesized. Powders with nominal composition (La1/7Sm1/7Nd1/7Pr1/7Y1/7Gd1/7Y ...
Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
(MDPI, 2023)
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic ...
Production of sub-micro sized silver particles by chemical reduction method in an environmentally-friendly manner
(Savez inženjera metalurgije Srbije, Beograd, 2020)
Silver nitrate in the solution was reduced in the presence of the dispersants by ascorbic acid, and silver particles were generated. The main goal was to examine the influence of different dispersants. The purpose was to ...
Complementary methods for characterization of the corrosion products on the surface of Ag60Cu26Zn14 and Ag58.5Cu31.5Pd10 brazing alloys
(Walter de Gruyter Gmbh, Berlin, 2020)
Corrosion products formed on the surface of two silver brazing alloys after the potentiostatic polarization in 3.5% sodium chloride solution were characterized by the standard methods such as, the X-ray diffraction, ...
STATISTICAL MODELING OF SOME ENVIRONMENTALLY-FRIENDLY COPPER-BASED ALLOYS / STATISTIČKO MODELOVANJE NEKIH EKOLOŠKI PRIHVATLJIVIH LEGURA NA BAZI BAKRA
(Beograd : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS), Society for Renewable Electrical Power Sources, 2023)
This paper present the results of defining the mathematical model which describes the dependence
of tensile strength from the influential input parameters, aimed at developing non-toxic alloys that
could completely respond ...
Recovery of tungsten trioxide from waste diamond core drilling crowns by nitric acid leaching
(International Journal of Refractory Metals & Hard Materials, 2021)
A cost-effective and simple hydrometallurgy procedure for recycling the diamond core drilling crowns by nitric acid leaching, followed by the sodium hydroxide leaching, has been developed. The effect of temperature, nitric ...
The Design of a System for the Induction Hardening of Steels Using Simulation Parameters
(MDPI, 2023)
This paper presents the development of a piece of induction hardening equipment based on the foundations of the design, starting from zero. It was intended for steels in general, and was tested on unalloyed low- and ...