Tailoring the properties of waterborne polyurethanes by incorporating different content of poly(dimethylsiloxane)
Samo za registrovane korisnike
2021
Autori
Stefanović, Ivan S.Džunuzović, Jasna V.
Džunuzović, Enis
Brzić, Saša J.
Jasiukaitytė-Grojzdek, Edita
Basagni, Andrea
Marega, Carla
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
A series of novel waterborne polyurethanes (WBPUs) was synthesized using alpha,omega-dihydroxypropyl poly(dimethylsiloxane) (PDMS), isophorone diisocyanate (IPDI), 2,2-bis-(hydroxymethyl) propionic acid (DMPA) and triethylamine (TEA). Different DMPA/PDMS molar ratio (from 0.2 to 0.7) and fixed -NCO/-OH molar ratio of 1.7, has been applied for the synthesis of six different WBPU films, without utilization of chain extension step during the synthesis. The structure of the prepared WBPUs was examined and confirmed by FTIR and NMR spectroscopy. The particle size of the prepared WBPU dispersions and molecular weight of WBPU films decrease with increasing DMPA content. In order to investigate the effect of the DMPA/PDMS ratio on thermal, mechanical and morphological properties, as well as the water resistance of the prepared WBPUs, diverse experimental techniques, such as thermogravimetric analysis, dynamic mechanical analysis, tensile tests, X-ray diffraction analysis (XRD), atomic force mi...croscopy (AFM), scanning electron microscopy (SEM) and water contact angle measurements have been carried out. This research has shown that the incorporation of PDMS in WBPUs led to the appearance of microphase separation and provided surface hydrophobicity, good thermal and mechanical properties, which allow application of these WBPUs as coatings for various purposes.
Ključne reči:
Waterborne polyurethane / Poly(dimethylsiloxane) / Thermal properties / Mechanical properties / MorphologyIzvor:
Progress in Organic Coatings, 2021, 161, 106474-Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200026 (Univerzitet u Beogradu, Institut za hemiju, tehnologiju i metalurgiju - IHTM) (RS-MESTD-inst-2020-200026)
DOI: 10.1016/j.porgcoat.2021.106474
ISSN: 0300-9440
WoS: 000705545300008
Scopus: 2-s2.0-85113279032
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Stefanović, Ivan S. AU - Džunuzović, Jasna V. AU - Džunuzović, Enis AU - Brzić, Saša J. AU - Jasiukaitytė-Grojzdek, Edita AU - Basagni, Andrea AU - Marega, Carla PY - 2021 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4803 AB - A series of novel waterborne polyurethanes (WBPUs) was synthesized using alpha,omega-dihydroxypropyl poly(dimethylsiloxane) (PDMS), isophorone diisocyanate (IPDI), 2,2-bis-(hydroxymethyl) propionic acid (DMPA) and triethylamine (TEA). Different DMPA/PDMS molar ratio (from 0.2 to 0.7) and fixed -NCO/-OH molar ratio of 1.7, has been applied for the synthesis of six different WBPU films, without utilization of chain extension step during the synthesis. The structure of the prepared WBPUs was examined and confirmed by FTIR and NMR spectroscopy. The particle size of the prepared WBPU dispersions and molecular weight of WBPU films decrease with increasing DMPA content. In order to investigate the effect of the DMPA/PDMS ratio on thermal, mechanical and morphological properties, as well as the water resistance of the prepared WBPUs, diverse experimental techniques, such as thermogravimetric analysis, dynamic mechanical analysis, tensile tests, X-ray diffraction analysis (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) and water contact angle measurements have been carried out. This research has shown that the incorporation of PDMS in WBPUs led to the appearance of microphase separation and provided surface hydrophobicity, good thermal and mechanical properties, which allow application of these WBPUs as coatings for various purposes. T2 - Progress in Organic Coatings T1 - Tailoring the properties of waterborne polyurethanes by incorporating different content of poly(dimethylsiloxane) SP - 106474 VL - 161 DO - 10.1016/j.porgcoat.2021.106474 ER -
@article{ author = "Stefanović, Ivan S. and Džunuzović, Jasna V. and Džunuzović, Enis and Brzić, Saša J. and Jasiukaitytė-Grojzdek, Edita and Basagni, Andrea and Marega, Carla", year = "2021", abstract = "A series of novel waterborne polyurethanes (WBPUs) was synthesized using alpha,omega-dihydroxypropyl poly(dimethylsiloxane) (PDMS), isophorone diisocyanate (IPDI), 2,2-bis-(hydroxymethyl) propionic acid (DMPA) and triethylamine (TEA). Different DMPA/PDMS molar ratio (from 0.2 to 0.7) and fixed -NCO/-OH molar ratio of 1.7, has been applied for the synthesis of six different WBPU films, without utilization of chain extension step during the synthesis. The structure of the prepared WBPUs was examined and confirmed by FTIR and NMR spectroscopy. The particle size of the prepared WBPU dispersions and molecular weight of WBPU films decrease with increasing DMPA content. In order to investigate the effect of the DMPA/PDMS ratio on thermal, mechanical and morphological properties, as well as the water resistance of the prepared WBPUs, diverse experimental techniques, such as thermogravimetric analysis, dynamic mechanical analysis, tensile tests, X-ray diffraction analysis (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) and water contact angle measurements have been carried out. This research has shown that the incorporation of PDMS in WBPUs led to the appearance of microphase separation and provided surface hydrophobicity, good thermal and mechanical properties, which allow application of these WBPUs as coatings for various purposes.", journal = "Progress in Organic Coatings", title = "Tailoring the properties of waterborne polyurethanes by incorporating different content of poly(dimethylsiloxane)", pages = "106474", volume = "161", doi = "10.1016/j.porgcoat.2021.106474" }
Stefanović, I. S., Džunuzović, J. V., Džunuzović, E., Brzić, S. J., Jasiukaitytė-Grojzdek, E., Basagni, A.,& Marega, C.. (2021). Tailoring the properties of waterborne polyurethanes by incorporating different content of poly(dimethylsiloxane). in Progress in Organic Coatings, 161, 106474. https://doi.org/10.1016/j.porgcoat.2021.106474
Stefanović IS, Džunuzović JV, Džunuzović E, Brzić SJ, Jasiukaitytė-Grojzdek E, Basagni A, Marega C. Tailoring the properties of waterborne polyurethanes by incorporating different content of poly(dimethylsiloxane). in Progress in Organic Coatings. 2021;161:106474. doi:10.1016/j.porgcoat.2021.106474 .
Stefanović, Ivan S., Džunuzović, Jasna V., Džunuzović, Enis, Brzić, Saša J., Jasiukaitytė-Grojzdek, Edita, Basagni, Andrea, Marega, Carla, "Tailoring the properties of waterborne polyurethanes by incorporating different content of poly(dimethylsiloxane)" in Progress in Organic Coatings, 161 (2021):106474, https://doi.org/10.1016/j.porgcoat.2021.106474 . .