The influence of steel surface modification by electrodeposited Zn-Fe alloys on the protective behaviour of an epoxy coating
Abstract
The electrochemical and transport properties of epoxy coatings electrodeposited on steel and steel modified by Zn-Fe alloys were investigated during exposure to 3% NaCl. The Zn-Fe alloys were deposited on steel surface from alkaline bath galvanostatically using different current densities. From the time dependence of pore resistance of epoxy coating (impedance measurements), diffusion coefficient of water through epoxy coating (gravimetric liquid sorption measurements) and water content in the epoxy coating (thermogravimetric analysis), it was shown that Zn-Fe sublayer could improve the corrosion stability of the protective system based on epoxy coating. The values of the pore resistance were almost unchanged over the long period of immersion time for epoxy coating on steel modified by Zn-Fe alloy deposited by 4 A dm(-2), indicating the great stability of this protective system. The values of diffusion coefficient of water through epoxy coating on this alloy and water content inside th...e epoxy coating were the smallest, indicating the low porosity of the coating.
Keywords:
Electrodeposition / Zn-Fe alloys / steel / epoxy coatings / corrosion / EISSource:
Progress in Organic Coatings, 2003, 47, 1, 49-54Publisher:
- Elsevier Science Sa, Lausanne
DOI: 10.1016/S0300-9440(03)00020-1
ISSN: 0300-9440
WoS: 000184141000005
Scopus: 2-s2.0-0038719757
Institution/Community
Tehnološko-metalurški fakultetTY - JOUR AU - Bajat, Jelena AU - Mišković-Stanković, Vesna AU - Kačarević-Popović, Zorica M. PY - 2003 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/511 AB - The electrochemical and transport properties of epoxy coatings electrodeposited on steel and steel modified by Zn-Fe alloys were investigated during exposure to 3% NaCl. The Zn-Fe alloys were deposited on steel surface from alkaline bath galvanostatically using different current densities. From the time dependence of pore resistance of epoxy coating (impedance measurements), diffusion coefficient of water through epoxy coating (gravimetric liquid sorption measurements) and water content in the epoxy coating (thermogravimetric analysis), it was shown that Zn-Fe sublayer could improve the corrosion stability of the protective system based on epoxy coating. The values of the pore resistance were almost unchanged over the long period of immersion time for epoxy coating on steel modified by Zn-Fe alloy deposited by 4 A dm(-2), indicating the great stability of this protective system. The values of diffusion coefficient of water through epoxy coating on this alloy and water content inside the epoxy coating were the smallest, indicating the low porosity of the coating. PB - Elsevier Science Sa, Lausanne T2 - Progress in Organic Coatings T1 - The influence of steel surface modification by electrodeposited Zn-Fe alloys on the protective behaviour of an epoxy coating EP - 54 IS - 1 SP - 49 VL - 47 DO - 10.1016/S0300-9440(03)00020-1 ER -
@article{ author = "Bajat, Jelena and Mišković-Stanković, Vesna and Kačarević-Popović, Zorica M.", year = "2003", abstract = "The electrochemical and transport properties of epoxy coatings electrodeposited on steel and steel modified by Zn-Fe alloys were investigated during exposure to 3% NaCl. The Zn-Fe alloys were deposited on steel surface from alkaline bath galvanostatically using different current densities. From the time dependence of pore resistance of epoxy coating (impedance measurements), diffusion coefficient of water through epoxy coating (gravimetric liquid sorption measurements) and water content in the epoxy coating (thermogravimetric analysis), it was shown that Zn-Fe sublayer could improve the corrosion stability of the protective system based on epoxy coating. The values of the pore resistance were almost unchanged over the long period of immersion time for epoxy coating on steel modified by Zn-Fe alloy deposited by 4 A dm(-2), indicating the great stability of this protective system. The values of diffusion coefficient of water through epoxy coating on this alloy and water content inside the epoxy coating were the smallest, indicating the low porosity of the coating.", publisher = "Elsevier Science Sa, Lausanne", journal = "Progress in Organic Coatings", title = "The influence of steel surface modification by electrodeposited Zn-Fe alloys on the protective behaviour of an epoxy coating", pages = "54-49", number = "1", volume = "47", doi = "10.1016/S0300-9440(03)00020-1" }
Bajat, J., Mišković-Stanković, V.,& Kačarević-Popović, Z. M.. (2003). The influence of steel surface modification by electrodeposited Zn-Fe alloys on the protective behaviour of an epoxy coating. in Progress in Organic Coatings Elsevier Science Sa, Lausanne., 47(1), 49-54. https://doi.org/10.1016/S0300-9440(03)00020-1
Bajat J, Mišković-Stanković V, Kačarević-Popović ZM. The influence of steel surface modification by electrodeposited Zn-Fe alloys on the protective behaviour of an epoxy coating. in Progress in Organic Coatings. 2003;47(1):49-54. doi:10.1016/S0300-9440(03)00020-1 .
Bajat, Jelena, Mišković-Stanković, Vesna, Kačarević-Popović, Zorica M., "The influence of steel surface modification by electrodeposited Zn-Fe alloys on the protective behaviour of an epoxy coating" in Progress in Organic Coatings, 47, no. 1 (2003):49-54, https://doi.org/10.1016/S0300-9440(03)00020-1 . .